Top Hose Fitting Kit

XtremeAmazing Heater Hose Repair Fitting Kit with Adapter Hose for 3.8L V6 Camaro Firebird 95-02

  • Compatible with 95-02 3.8L V6 Camaro / Firebird With 5/8" Heater Hose.
  • This kit includes 2 adapters, which bolt into your tensioner/heater inlet assembly, adapter mount screws, a 3/4" to 5/8" plastic heater hose adapter, 10" of 5/8" heater hose, and 4 stainless steel hose clamps. This kit will allow you to repair your broken heater hose ends on the 95-02 V6 Camaro/Firebirds that have the 3/4" and 5/8" heater hoses. This allows for easier repair in 1 complete kit so you can retain your stock 3/4" heater line..
  • NOTE : Camaro/Firebirds have models with 2 - 5/8" heater hoses, and models with 1 - 5/8" and 1 - 3/4" hoses. If your Camaro/Firebird has 2 of the 5/8" heater hoses, you need our 5/8" repair kit instead. This kit is for the cars with the 2 size hoses at the tensioner..
  • Package Contents: 1x Heater Hose Repair Fitting Kit.
Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

  • 20 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 13” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Th....
Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 48” Longest Length (not including fittings) x 8.5” x 20.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and water-tight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT Over-tighten fitting damage will occur – Use plastic threaded fittings, metal threads may damage tank fittings.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5”....
Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

  • 【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
  • 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
  • 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
  • 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
  • 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....
Check Stock

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed fitting threads.
  • Always wear protective welding helmets and welding gloves when working with welding equipment.
  • NO MORE CRACKS: Other welding torch kits often include low-quality plastic hoses that easily crack and leak to create a disastrous fire hazard with imminent failure to look forward to, but this welding equipment oxygen acetylene torch kit hose is constructed from acetylene rubber for maximum strength and durability.
Check Stock

Camco RhinoFLEX Tote Tank 3-foot Sewer Hose Kit | Features a Clear Low-Profile 90-Degree Elbow, Steel Wire Reinforced Polyolefin Construction, and 4 Bayonet Prongs on Each End (39768)

  • Assembled Kit Includes: (1) 90-degree transparent elbow with swivel bayonet fitting, (1) RhinoFLEX tote tank sewer hose, (1) hose-to-RV swivel bayonet fitting, and (2) storage caps.
  • Compatibility: Connects your portable waste tote tank to a lug sewer fitting.
  • Fittings Swivel: For ease of use and are designed to stay sealed.
  • Easy to Store: Assembled kit is 3-feet long when extended.
  • Durable Construction: The RhinoFLEX sewer hose is made of a heavy-duty polyolefin and reinforced with steel wire.
Check Stock

RIDGE WASHER Pressure Washer Gun with Extension Wand for Hot and Cold Water, Power Washer Gun with M22 Fitting, 5 Nozzle Tips, 40 Inch, 4000 PSI

  • Power washer gun is designed for hot and cold water in gas and electric pressure washer. Max Temperature for water is up to 100℃ ( 212°F ). Max Flow Rate is up to 5.3 GPM. Max Pressure is up to 4000 PSI..
  • This pressure washer wand fits pressure washer hose with M22 14mm or M22 15mm fitting. Generac, Ryobi, Briggs Stratton, Craftsman, Simpson, Karcher pressure washer hose has M22 14mm fitting. Sun Joe, Excell, MI-T-M, Stanley, Campbell, AR Blue, Cleanforce, Simoniz power washer hose has M22 15mm fitting. Please connect power washer wand to the hose directly if your hose has M22 14mm fitting. Please connect brass coupler between wand and hose if your hose has M22 15mm fitting..
  • The length of pressure washer handle is adjustable. Easy to change the length based on the purpose of cleaning. There are three length, 40 inch, 24 inch, 9 inch..
  • 5 spray nozzles have different spray angle (0, 15, 25, 40, 65 degree). Choose suitable nozzle based on the purpose of cleaning. Such as watering flowers or plants, washing car, fence or roof. Universal 1/4’’ quick connector is also designed for turbo nozzle, surface cleaner, water broom, undercarriage cleaner, pivoting coupler, foam cannon, pressure washer sandblasting kit, gutter cleaner attachment..
Check Stock

Air seat blow gun kit,Heavy Duty Truck cab air blow gun Cleaningwith 9 Meter Long Coil and 2 interchangeable nozzle tips -Air Duster Blow Gun Kit

  • This Air Blow Gun Kit is Professionally Manufactured and Designed for Efficient Blowing of Air, Cleaning Parts and Surfaces.Wide Use on Trucks with Air Ride Seat Systems, for Car Lorry Truck, for Truck Dust Blow.
  • It helps with dust, debris, dirt in the vehicles..
  • The air blow gun kit is convenient for drying off fluids, clearing debris, and much more.2 interchangeable nozzle tips, for different places, spacious or narrow spaces.Plastic hanging hook, easy to use and convenient for placing and storage.Includes 9 Meter Long Coil coiled,burst pressure up to 120 PSI, meet your normally use..
  • T-Shaped Quick Connector With Bronze Ball Automatic Shut-Off Valve,it contains teflon tape, which can effectively avoid fitting leak air.
  • PU Hose, good elasticity, It won't break, even if the temperature is below zero.
  • Complete kit splices into air seat supply.
  • Blow gun kit Also known as air blow gun kit,air seat blow gun kit , Truck Dust Air Blow Gun Kit ,truck cab air blow gun kit, blow gun air tool kit.
  • Include Air Blow Gun, Brass Tee Fitting, Long Nozzle, Air Hose, Teflon Tape.comes with 90 DAY limited warranty.
Check Stock

Camco Super Heavy-Duty Tote Tank Sewer Hose Kit | 18mil HTS Vinyl |3-Foot (39645), Black

  • Assembled Tote Tank Kit: This kit is designed to make using your portable tote tank as easy and secure as possible.
  • Compatibility: Connects your portable tote tank to any lug sewer fitting.
  • Includes: (1) 3-foot tote tank sewer hose (1) 90-degree clear elbow with (2) swivel bayonet ends, and (2) bayonet fitting storage caps.
  • 90-Degree Clear Elbow: Lets you see when your RV's black water tank is empty and clean.
  • Attaches your RV sewer hose to your tote tank in a streamlined fashion to create downhill flow that minimizes kinking.
  • Swivel Fittings: Provide ease of use and are designed to stay sealed.
  • Durable Construction: The tote tank sewer hose is made of super heavy-duty 18mil HTS vinyl.
  • The clear elbow is made of durable, UV-stabilized resin.
  • Easy to Store: Assembled kit is 3-feet long extended and compresses to 20-inches for easy storage.
Check Stock

NEW WILWOOD GO KART BRAKE SET WITH CALIPER PADS MASTER CYLINDER & LINE KIT FOR 1/8 ROTORS GREAT FOR KARTING JR DRAGSTER ETC SOUTHWEST SPEED

  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560)..
  • Wilwood Karting Kit with Brake Caliper & Pads, Master Cylinder, 5' of Nylon Line, & 90 Degree Fitting to use with Caliper if necessary. (Wilwood Part #120-5498, #260-5520, #928-503, & #928-560). Kit Includes: Wilwood Go-Kart Caliper for .125" Rotors Fits 0.125" Thick rotors Features Two 1.00" Pistons Weighs only 1.2 lbs. Comes with high friction brake pads..
  • Wilwood Go-Kart Master Cylinder with a 1/2" Bore 1/2" Bore Weighs only .55 lbs. This super lightweight aluminum master cylinder designed specifically for kart & jr. dragster racing applications incorporates an adjustable lever ratio with a remote mount clear fluid reservoir for easy monitoring The assembly comes ready to install and includes billet bracket, lock-wired drilled hardware, & fluid line fitting ..
  • 5 Feet of -3 Nylon Brake Line 3/16" Nylon tubing 5' Should equip most karts with some left-over..
  • 90 Degree Fitting for Caliper Depending on how everything is mounted, the line might run to the caliper at a bad angle for the straight fitting. This 90 degree fitting instal....
Check Stock

Hide A Hose Central Vacuum White Inlet Kit with 40 Foot Hose

  • Central Vacuum 2x2 Fitting adapts for 2" Schedule 40 Plumbing Pipe.
Check Stock

DOZYANT 12FT Propane Quick Hose Disconnect Conversion Kit for Weber Q Grill Easy Connects to RV Trailer Low Pressure System

  • The conversion kit include a 12ft quick connect hose and a 1/8”female thread x 1/4”male quick connect plug fitting.
  • Converts a Q Series gas grill to allow connection to the low pressure system on a RV Trailer or Camper.
  • The conversion kit use for Weber Q 100, 1000, 200, 2000, 1200, 2200 LP Grill and other propane appliance with has a 1/8" MALE thread.
  • You need to take the regulator off before connecting 1/8”female thread x 1/4”male quick connect plug fitting.
  • Hose ends fitting-1/4” Safety Shutoff Valve & Male Full Flow Plug.
Check Stock