Top Hot Wedge Welding Equipment

ABN Oxygen Acetylene Hose 1/4 Inch B Fittings Twin Welding Hose Oxy Acetylene Torch Hose Cutting Torch Hoses, 25 Foot

  • GET THE JOB DONE: The ABN 25 Foot Acetylene / Oxygen Torch Hose Twin Pack is designed to transport oxygen and acetylene gases to your welding torch or cutting equipment for your metalworking projects.
  • Twin oxygen and acetylene torch hoses are flame retardant and suitable for indoor and outdoor use in your home, mechanics shop, or on any job site.
  • PERFECT SIZE FOR YOUR NEEDS: 25 foot torch hose length (7.6m) allows you to safely keep the tanks away from the torch tip while servicing your vehicle.
  • Oxy Acetylene torch kit gas hose features a 1/4-inch (6mm) inner diameter (ID) and 1/2-inch (13mm) outer diameter (OD) and has a maximum pressure of 300 PSI (20.7 Bar) to supply optimal flow rate.
  • FITS YOUR WELDING TORCH AND REGULATOR: Twin welding torch hose includes standard B fittings on both ends (4 threaded fittings total) to connect to your existing regulator or cutting torch kit.
  • Make sure that your regulator and oxy acetylene cutting torch handle are "B" size (9/16 inch - 18) air hose fittings to ensure exact fitment.
  • KEEP LINES DISTINGUISHABLE: Red and green twin hoses provide a color-coding system to hook up to your regulator and oxy torch kit safely.
  • One rubber hose includes right-handed fitting threads, and the other welder hose includes left-handed ....
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Makita PR00000034 1-3/8\ Welding Nozzle

  • WELDING NOZZLE SUPPORT: PVC floor round welding nozzle with wheels, can be used with welding wire, with rollers to guide the welding seam straighter..
  • WELDING NOZZLE WITH WHEEL: The welding nozzle with wheel can be directly fixed on the hot air gun. When there is a wheel, the wheel can be directly attached to the gap, and the gap can be filled evenly along the line of the gap, which can solve the manual filling of the weld. The filling is not straight..
  • WELDING ROD SPECIFICATIONS: Hot Air Gun Welding Nozzle can use 3mm/4mm/5mm..
  • WELDING NOZZLE WITH WHEEL ADAPTER: 8mm inner diameter of the heat gun nozzle, which can be matched with any other welding nozzle with an outer diameter of 8mm..
  • MATERIAL: 304 stainless steel alloy, with good corrosion resistance and heat resistance, can withstand high temperatures of 800-1000℃, will not rust, oxidize, and deform under high temperature for a long time. It is an ideal accessory for plastic welding..
Check Stock

WAn2SHI0SY22 110V Automatic CNC Spot Welder, 100W Argon Arc Welder Spot Welding Machine Pot Kit for Silver Jewelry Welding DIY Repair for Cobalt Chrome Alloy Hardware Workpiece

  • 【Pulse argon arc welding machine】: CNC Spot welding machine is a kind of high-quality pulse argon arc welding equipment, which can weld perfectly and protect the object to be welded.Multi-board high-power operation, high durability, low failure rate.High-quality tungsten needle, high-quality wear-resistant.
  • 【Wide Application-Easily Solder 】: THE Pulse argon arc welding machine, suitable for all types of de-n-ta-l welding work, jewelry welding work, whether it is new restoration or restoration. The application field corresponds to at least one welding machine, and the equipment and operating costs are much cheaper than the welding machine..
  • 【Circulation Cooling system】: The cooler with built-in smart chip prevents the welding machine from being damaged by overheating, and has automatic short-circuit protection to prevent overheating of welding. Protect yourself and the machine..
  • 【Precise Control-Intelligent adjustment】: This wireless spot welding device enables more precise welding with complete calibration control. In addition to the characteristics of small size, safe and stable system, convenient operation....
Check Stock

WeldingCity 2-pk Gas Nozzle 21-50-F (Flush Tip) 1/2\ for Lincoln Magnum 100L and Tweco Mini/#1 MIG Welding Guns

  • 【Craftsmanship】 The welding gun nozzles are processed by exquisite craftsmanship, and the surface is fine and smooth, and the high-quality speed welding nozzle is more practical..
  • 【316 Stainless Steel】 Comparing to other material plastic welding nozzle, such as 304 stainless steel, 316 stainless steel is higher grade and better for rusting resistance, corrosion resistance, strength, welding, and heat resistance..
  • 【Performance】 The nozzle has stable performance, is not easy to oxidize and deform, has strong high temperature tolerance, is not easy to be polluted, and has a long service life..
  • 【What Do You Use the Welding Kits In】 Arc Welding nozzles and tips are suitable for hot air hand tools such as hot air welders, heat guns. Good replacement nozzle for vinyl heat gun..
  • 【Widly Applications】 This hot air welding gun nozzles can be used to weld ABS, PE, PP, PVC and other plastic plates, professional and practical. Suitable for a wide range of work including plastic fabrication, plastic welding, civil engineering, geomembrane, bumper repairing, roofing and vinyl floor welding etc..
Check Stock

YESWELDER Heavy Duty Fiberglass Welding Blanket，4 x 6ft Fireproof Insulation Blanket，1/3” 8mm Thickened Weld Cover with Grommets，Thermal Resistant Insulation Welding Curtain Mat Grill

  • 【Well-woven Fiberglass Blanket】: Constructed from 24.7 oz/yd² fiberglass material, this welding blanket serve as an excellent shield against heat and fire. Tight stitching and exquisite weaving. Our heat resistant mat shield is a nice addition to welding equipment. Standard size : 4x6 ft (122x183cm), thickness: 0.31” (8mm).
  • 【Fire-retardant, Less Heat Damage】: The fiberglass blanket has high thermal protection capability and withstands working temperatures up to 1,022℉ (550℃). Ideal for MIG, TIG, and other stick welding application. Highly effective in protecting welders, equipment and other materials against ember, heat, sparks, and splatters.
  • 【Safe Hanging & Easy Storage】: Grommets are placed every 11” (28cm) to ensure an extended and firm suspension. Brass grommet is of 0.59”(1.5cm) bore diameter. Its fabric allows you to fold easily, not only to meet your needs for thickening the welding blanket, but also to ensure convenient storage.
  • 【Great to Help Maintain Temp】: Flame retardant welding blanket has the effect of heat preservation. The grilling smoker blanket insulates your grill during cold weather. Draping it over equipment or floor surfaces,or as a vertical shield.
  • 【Multi-field Application】: The welding blanket i....
Check Stock

PrimeWeld MIG180 Mig Welder, 180 Amp Wire Feed Welding Machine With Dual Voltage 220v, 110v

  • ...ding machine being wire feed, most people find it easier to use than other welding methods. The MIG180 allows you to create excellent, intricate welding designs..
  • Amazing Performance - The MIG180 gives you three different welding processes. Like most MIG welders, you can run flux-core wire without gas using the same equipment as you do for MIG with gas. This machine also adds aluminum welding and includes an electrode holder for stick welding into your shop's arensal..
  • Aluminum Welding - Welding aluminum can be impossible without the proper equipment. PrimeWeld MIG180 solves the problem with its own special spool gun to alleviate any kinks or jams..
  • Multiple Features - This welder machine has dual 120/240 volts input and can be used as a DC stick welder (MMA), flux core welder (FCAW) and of course a MIG welder (GMAW). The Mig180 comes ready to use right out of the box! Drive Rollers for MIG and Flux are Included. This machine Also takes standard Tweco Consumables..
  • PrimeWeld's Promise - If for any reason you're not satisfied with your MIG180 MIG Welder Machine, simply reach out to Customer Support and we'll make things right for you! All Employees, Parts and Customer service Is located in the USA!.
Check Stock

Vaper 41225 Chipping Hammer

  • ✔️What You Get? --- In this welding slag removing tools kit, there is 1 piece 10 Inch Welding Chipping Hammer with Coil Spring Handle & 1 Durable Scratch Wire Brush. Besides, there is a Pair of Strong Leather Forge/Mig/Stick Welding Gloves highly resistant to spatter/heat/fire. It absolutely is a great HELPER for you to remove and clean corrosion and slag from most of your welds..
  • ✔️ Size Detail --- Welding Chipping Hammer: 255 × 125 × 20mm/10 × 5 × 0.78 inch (Handle length × Cone part length × Cone part width).
  • Wire Brush: 252 × 120mm/9.9 × 4.7 inch (Total length × Brush length).
  • Welding Gloves: 415mm/16.3 inch (Length)..
  • ✔️ Scratch Wire Brush --- The rust & slag cleaning brush is made of strong steel wire and sturdy wood handle, the ergonomic arc handle provides you comfortable operation feeling, make the cleaning job more fast and relaxing. Its brushing wires are installed firmly, not easy to fall off during use. It also designed with a hanging hole on the end of handle, which is convenient for storage while not use it..
  • ✔️ Welding Chipping Hammer --- This professional welding hammer is forged with premium high carbon steel overal heat treatment, with high hardness, strength and toughness. Designed with a steel coil spring h....
Check Stock

HITBOX 50A Plasma Cutter Welder Combo - 4 in 1 110V/220V 200A HF Pulse TIG Welder - Stick ARC MMA Welder High Frequency Multifunction Cutting Welding Machine with Foot Pedal (CT520)

  • 【4-in-1 Plasma cutter/welder combo】110v/220v 10-50Amp High Frequency plasma cutter max ideal cut thickness: 1/2".
  • 200amp TIG Pulse Welding Equipment allows welding thinner metals and high heat conductive metals without burning through. 200amp stick/mma/arc electrode welder Efficiency: 80%. Real current extending the weld cable to 168 ft does not attenuate the current.
  • 【Foot pedal remote control】Synergic Control,Automatic change of the voltage by adjusting the amperage.Comes with foot remote control / proximity control with MMA, TIG welder can improve welding efficiency, reduce the hassle in pedal control current, and guarantee quality (suitable for cutting and welder). The current fast heating (hot boot), slowly down, is good for the formation of the welding pattern.
  • 【Versatile welding, cutting machine】Cuts many metals including stainless steel, aluminum, titanium, cobalt, nickel alloys and cast iron. Includes soft-switching technology and full-bridge design for a longer life and stable arcs at low temperatures.
  • 【IGBT inverter & 2T 4T Function】: Hitbox CT520 inve....
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Vastar Soldering Iron - Soldering Iron Station, Anti-Static Soldering Iron Station Kit with On-Off Switch Temperature Adjustable

  • 【Hot Ceramic Rapid Heating】- Welding table temperature adjustment, welding table temperature as high as 480℃, only 15 seconds.Welding platform can manage multiple welding projects, using the latest temperature control circuit, rapid temperature adjustment.
  • 【Excellent Material】- Steel pipe welding bed is made of heavy 304 stainless steel, welding bed adopts internal hot ceramic heating element, high efficiency, long life.
  • 【Accurate Temperature Adjustment】- The welding table has a variable power control knob, which can adjust the power from 5 watts to 60 watts to ensure the accuracy of the welding table.
  • 【Simple Operation】- The iron frame welding platform is integrated with the host machine, which is easy to operate and occupies a small area.Built-in solder holder for safe placement of stylus and cleaning sponge to remove excess solder residue for next use.
  • 【Multi-purpose】- Silica gel grip, with skid resistance and heat resistance.Welding bench for computer and mobile phone repair, electronic component welding, daily welding work.
Check Stock

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock