Top Hot galvanized

Behrens 1208GS Steel Galvanized Utility Pail 8-Quart

  • Built with the highest quality material, this utility pail is durable, made to last, and comes in both galvanized and hot dipped galvanized steel.
  • Designed with a classic finish that provides functionality for any use or a zinc coating which provides watertight seal and textured rustic finish.
  • This utility pail is made for home, garden, or farm and ideal for icing beverages, cleanup, storage, wet or dry carry, décor and more.
  • Sealed seams provide waterproof properties for wet or dry contents, rust and rodent resistant, and an offset bottom to keep the pail off the ground.
  • Our galvanized steel options are proudly Made in the USA, with hot dipping produced globally, this beverage bucket and utility pail is a better alternative to plastic, manufactured with 100% sustainable materials..
Check Stock

Square U-Bolt Zn3/8x4x7

  • SIZE: 1/2" D x 3 -1/16" W x 3-5/16" L (Exactly AS Pictured).
  • CONTENTS: (4) U-bolts with (8) each flat washers, lock washers, and Heavy Hex Head Nuts (ALL hot dipped galvanized).
Check Stock

Hard-to-Find Fastener 014973152116 USS Flat Washers, 3/8-Inch, 100-Piece

Check Stock

Tree Island 234114163 5D 1.75 in. Hot Dip Galvanized Box Nail

Check Stock

WindRider Boat Anchor Kit - Fluke Style Boating Anchors for Sand - Boat Anchor Rope and Chain - 20-30ft Boats Fortress Anchor - Heavy Duty Boat Anchor - Fluke Anchor Kit - Marine Boat Anchor

  • Galvanized Steel Boat Anchor: For Medium boats (20-32ft) this is a perfect plug and play kit. No more worrying about buying the boat anchor rope and chain, splicing the line to the chain, drilling a hole for easier retrieval. Just order this and go..
  • Super Holding Power: Fluke style boat anchors are perfect anchors for sand or mud bottoms. The flukes articulate and will dig into the bottom, allowing these relatively lightweight fluke anchor kit to hold tight. Just make sure you give it the opportunity to bury into the ground..
  • Boat Anchor Fluke Style: Sometimes pontoon boat anchor kit get hung up and nothing is worse than having to cut your line because you can't free it. We predrill a recovery hole so you can recover it (without scuba gear) if it does get stuck. We drill the hole and then galvanize it, so you don't have to worry about rust and corrosion or drilling the hole yourself. We recommend setting up the anchor like the image using zip ties, so if you need to break it free you are able too...
  • Everything You Need Included: 100ft of 3/8in triple strand nylon rope that has an eye splice. 2 - 3/8in Hot dip galvanized bow shackles with holes for wiring shut. 8ft 5/16in hot dip galvanized chain. 1 Hot Dipped Galvanized Steel Fluke danforth anchor....
Check Stock

YARDGARD 308199B, Height-24 Inches x Length-50 Ft, Color - Galvanized

  • Dozens of uses including coverings for window and screen doors, tree guards, drains, gutters, under eaves, soil sifters, and much more.
  • Uniformly welded, this quality fencing product is galvanized after product, providing a double zinc coating for maximum rust resistance and long life.
  • Heavy duty hot dipped galvanized hardware cloth.
Check Stock

YARDGARD 308247B Hardware Cloth 24-Inch x 50-Foot, Silver

  • Dozens of uses including coverings for window and screen doors, tree guards, drains, gutters, under eaves, soil sifters, and much more.
  • Uniformly welded, this quality fencing product is galvanized after product, providing a double zinc coating for maximum rust resistance and long life.
  • Heavy duty hot dipped galvanized hardware cloth.
  • Size of garden cloth is 24-inches by 50-feet 1/4-inches mesh.
Check Stock

XL 10" Low Profile Survey Marker - 2 Pack - Hi-Vis Orange

  • 2 Pack - Marine Hot-Dipped Galvanized Steel to last forever, NOT just painted or powder coated that will rust away over the years.
  • Installs flush with ground so you can easily mow or drive right over them.
  • Lifetime Warranty - Marine Hot-Dipped Galvanized Construction.
  • Easy to locate but not obtrusively noticeable to neighbors or someone passing by.
  • 2 Pack of XL Size - 10" long w/Large 2 5/8" diameter head - Patent Pending.
Check Stock

National Hardware N278-879 V7721 Corrugated Joint Fasteners in Bright, 30 pack

  • Siding Nails 2-1/4-Inch x .092-Inch, 15-Degree Collated Wire Coil.
  • Full round head and ring shank, hot dipped galvanized fiber cement material offers superior protection in all pressure treated lumber.
  • Material - HDG steel (Hot-Dipped Galvanized Steel).
  • 2-1/4-Inch x 0.092-Inch. Also know as siding nails 2-1/4In, siding nails coil, coil nails siding, coil nails 15 degree, coil nails 2-1/4In.
  • Package includes 12 x 300 count siding nails.
Check Stock

NeatHeat Inside Corner 135 Baseboard Heater Cover

  • Easy DIY installation- no tools or hired help is needed. Snap the Baseboarders end caps on to the Baseboarders replacement cover panel and position the assembly onto the original backplate. With a firm push, the assembly slips into place over the original baseboard heater..
  • All Baseboarders products are galvanized steel with a powder coated semi-gloss white finish. Panels are fabricated in 24 gauge galvanized steel. Endcaps are fabricated in 22 gauge galvanized steel. The panel holes are 1/8” in diameter to allow proper airflow..
  • Intended for hydronic (hot water) baseboard heaters, but will work for electric baseboard heaters. Use basic precautions when using with electric baseboard heaters, as they operate at higher surface temperatures. Baseboarders products will become just as hot as the original..
Check Stock

Hot Dipped Galvanized Steel Jaw and Jaw Turnbuckle 3/8 x 6 Turnbuckle Heavy Duty 1200 lbs Working Load Limit 3/8 Threaded Diameter x 6in - Durable Weather Resistant Turnbuckles

  • LONG-LASTING - Our turnbuckle uses hot dipped galvanization to protect the steel from humidity, corrosion, and other elements. No other kind of protective coating can give this much longeviy to steel, so you’re sure to use our turnbuckle for years!.
  • SAFETY TESTED - Safety is our top priority. All of our products, including this galvanized steel turnbuckle, have passed EN71 test, CE and RoHS safety tests..
  • COMES WITH NUTS AND BOLTS - This jaw and jaw turnbuckle comes with nuts and bolts that are made of the same durable hot tipped galvanized steel..
  • MULTI-APPLICATION - This galvanized turnbuckle has a body opening that measures 18 inches, and a working load limit of 1,200lbs. You can use this to tension a zipline, fix a seat, straighten a tree, create a gate for your hunting cabin, or at home. The list goes on!.
  • LIFETIME WARRANTY - We make sure that all the products we put out are of the best quality and give good value for money. However, if you have trouble with this jaw and jaw turnbuckle, we’re offering a lifetime warranty!.
Check Stock

1/2 Lock Washer Split Ring Hot Dipped Galvanized Steel Qty 1000

  • Lock Washer Split Ring Hot Dipped Galvanized Steel.
  • Split ring lock washers are used to prevent nuts, bolts and screws from vibrating loose..
  • Lock washers are split at a certain point and bent giving them a helical shape, creating a spring-like effect.
  • In a variety of materials, these lock washers are pressed down adding extra pressure to the nut or bolt and material. This extra pressure creates a resistance to rotation..
  • Hot dipped galvanized steel offers superior corrosion resistance and is well suited for harsh environments, HDG should only be used with other HDG fasteners.
Check Stock