Top Hotend For 3d Printer

Ewigkeit 24V 40W Heater Cartridge 620 Ceramic Hotend for 3D Printer Prusa Mendel (Pack of 5pcs)

  • 24v cartridge Heater is made of 304 stainless steel material,Diameter: 6mm.
  • Voltage: 24v, Power: 40w, Conveniently pre-wired with 1 meter long high temperature resistant wire.
  • Easy installation, wide temperature range, good stability, high reliability provide a high corrosion prevention.
  • Heating cartridges work with Creality CR-10S Pro,CR-X,Ender 3, Ender 3X, Ender-3 Pro 3d printer,Anet E10 etc.
  • 5pcs of 24V 40W 620 ceramic cartridge heater for 3D printer hotend.
Check Stock

TPU Flexible Short Range Extruder with Eccentric Wheel Flexion Retrofit Extruder Kit for 3D Printers TPU Prints

  • Compatible with Ender 3/Ender 3 V2/Ender 3 Pro 3D Printer. Supporting all 1.75mm diameter filament especially for flexible filament such as TPU, PLA and other flexible filaments..
  • Easy to Install and Use - Switch Bowden extrusion to direct extruder at any time and easy to disassembly. It doesn't affect the inherent function of the printer because it's a complete extrusion kit. With longer Extruder motor connecting cable, tools, accessories, and wiring diagram instruction for installation, easy to assemble..
  • Smooth Feed-in - Lower torque requirements on the stepper motor, reducing the possibility of the nozzle blockage when retracting filament and malfunction when loading new filament..
  • Integrated All Metal Hotend - It's sturdy and wear-resistant with an all-metal shell and surface oxidation treatment.
  • an Integrated structure is convenient for wiring and replacing..
  • 3D Printer Direct Extruder Upgrade kit Easy Print TPU Flexible Filament.
Check Stock

ExcelFu 5pcs 30MM Length Extruder 1.75MM Teflon Throat Tube and 5pcs 0.4MM Brass Extruder Nozzle and 5pcs Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer (Bonus: 2pcs hex Key Wrenches)

  • 5x 3D Printer Nozzle Throat Tube + 5x Nozzle Print Heads + 5x Heater Blocks Hotend + 2x Hex Key Wrenches(for MK8 Makerbot Reprap Prusa I3 3D Printer).
  • Nozzle Throat Tube: Material - Stainless Steel.
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D printer, works with Anet A8.
Check Stock

3D Printer Parts Accessories Tool Set Cleaner Kit 41PCS with E3D Nozzles Cleaning Needles Tweezers Heater block and Cover,Tube Throat for Ender 3 Pro/Ender 5/ CR-10/10S

  • Aluminum Heater Block: Works perfect with nozzle and nozzle throat..
  • Stainless Steel Throat: 3D printer parts aluminum heater block extruder hotend kit is replacement parts for Ender 3 /Ender 3 Pro / Ender 5 /Ender 5....
  • 0.4mm Brass Nozzles: The 3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy....
  • PTFE Teflon Bowden Tube : PTFE Tubing can resist higher temperature than any other tubing, which is perfect for printing exotic filaments such as ABS,....
  • Excellent Cleaning Needles: The E3D nozzle cleaning needles are very flexible and robust, easy to bend the needle into nozzle and will not break.....
Check Stock

HICTOP Ender 3 Hotend Ender 3 Pro Hotend 24V 40W Full Assembled Extruder Kit Accessories with Silicone Cover for Ender 3, Ender 3 Pro 3D Printer

  • 1 Fully assembled extruder, Plug and Play Ender 3 Pro Hotend, you do not need to cut it..
  • 2 Compatible with Ender 3, Ender 3S, Ender 3 Pro and similar 3D printer..
  • 3 There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, silicone cover, etc..
  • 4 24V high speed fan, lose heat quickly and efficiently.
  • nozzle and tube connect seamless, prevent material leaking and blocking..
  • 5. Silicone Cover is provided to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
Check Stock

2-Pack 3pin Dual Ball Bearing DC Fans DC 5V 4010 Extruder Hotend Cooler Radiator Left Hotend Fan for Prusa i3 MK3 MK3S MK2/2.5 3D Printer

  • Dual Ball bearing fan, Long lifetime 50000Hours tested under 40degree temperature.
  • It has two sides, but the side with sticker must be always facing the hotend (not visible when the fan is mounted). Otherwise, the cooling won't work....
  • 5V DC 0.1A, This fan is used for Prusa i3 MK3 MK3S MK2/2.5 3D printer Extruder.
  • Power connector:3pin with RPM measuring function.
Check Stock

MK8 Extruder Hotend 3D Printer Assembled kit for CR-10/CR-10S/CR-S with Aluminum Heating Block 1.75mm, 0.4mm Nozzle

  • 100% original and high quality 3D Printer accessories for Creality CR10/ CR10S/ CR10S4/ CR10S5.
  • MK8 Extruder Hot End Kit, white wire is temperature thermistor, red wire is heating tube 24V 40W.Perfect replacement accessories/parts for Creality CR-10 CR-10S S4 S5 3D Printer.
  • This CR-10 hotend can work with different sizes of MK8 nozzle: 0.2mm 0.3mm 0.4mm 0.5mm 0.6mm 0.8mm 1.0mm nozzle.
  • Tip of MK8 0.4mm nozzle, aluminum heating block, throat pipe (built-in Teflon) for 1.75mm filament.
  • With nine(9) cooling fins on the heatsink.No blockage,no leakage,fast heat dissipation, better printing effect..
Check Stock

Haldis 3D Printer Bowden Extruder Hotend Kits,Upgraded 24V Volcano All Metal V6 J-Head Extrusion Hot End Parts with 5 Pieces Brass Nozzle + 3 Cooling Fans 3010 for All 1.75mm E3D V6 Makernot

  • 【UNIVERSAL UPGRADED V6 HOTEND KIT】: Compatible with all 1.75mm E3D V6 Makerbot 3D printer.
  • HotEnd featuring an all-metal design with....
  • 【STANDARD BRASS NOZZLE】: Nozzles are made of high quality brass,Heavy duty and provide a long service life.Easy to install and change.include 5....
  • 【PREMIUM COOLING SYSTEM】: 24V / 40W heating, the temperature can reach up to 350 ° C，and we adopt 3 pieces cooling fans (30*30*10mm).Multiangle....
  • 【ASSEMBLY NEEDED】: The package include all parts.No-Solder, No-Tape, No-Adhesive Assembly And Maintenance，Easy to Install..
  • 【QUALITY GUARANTEE】: We are committed to providing more reliable product and better customer service to our customers,if you aren't 100%....
Check Stock

PTFE Bowden Tube 1M 1PCS+ 6pcs KJH04-M6 Fittings + 6pcs JP4-01 Pneumatic Fittings with PTFE Tube Cutter for 3D Printer 1.75mm Filament

  • 3*1 Meter Original Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate....
  • 1* PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
  • 6 * JP4-01 and 6 * KJH 04-M6 bowden tube fitting to secure PTFE in extruder and hotend..
  • Easy to Install: the pneumatic fittings are PC4-M6 and the hotend fittings are PC4-M10, the upper part can be inserted outer diameter 4mm PTFE tube....
  • Compatibility: fit for 3D Printer 1.75mm Filament and other devices..
Check Stock

Hardened Steel Nozzle 0.4 mm/ 1.75 mm 3D Printer MK8 Nozzles Tool High Temperature Wear Resistant Compatible with Makerbot Creality CR-10 All Metal Hotend Ender 3/ Ender3 pro Prusa i3 5 Pieces

  • Durable material: MK8 extruder nozzles are made of hardened tool steel, good abrasion resistance, heat resistance and corrosion resistance, sturdy....
  • Good performance: this hardened tool steel nozzle has higher toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but....
  • High precision: the inner wall of the MK8 nozzles is smooth and has no burrs, the viscosity coefficient is small, extruder nozzle diameter error less....
  • Compatibility: these 3D printer nozzles compatible with MK8 hotend for Creality 3D printers, such as Ender-2/ Ender-3/ Ender-3 pro/ Ender-5, also....
  • What you get: package comes with 5 pieces of black MK8 nozzles, the size is 0.4 mm, sufficient quantity to facilitate your timely replacement,....
Check Stock

2-Pack Long Lifetime 3wires 50x50x15mm DC Fans DC 5V Cool Blower Fan 5015 Extruder Hotend Cooler Front Hotend Fan for Prusa i3 MK3 MK3S MK2/2.5 3D Printer

  • Dual Ball bearing fan, Long lifetime 50000Hours tested under 40degree temperature.
  • It has two sides, but the side with sticker must be always facing the hotend (not visible when the fan is mounted). Otherwise, the cooling won't work....
  • 5V DC 0.1A, This fan is used for Prusa i3 MK3 MK3S MK2/2.5 3D printer Extruder.
  • Power connector:3pin with RPM measuring function.
  • Package:2piece 5015 Front hotend blower fan.
Check Stock

3D Printer Cooling Fan 40mm x 40mm x 10mm Blower Cooling Fan with 2 Pin Terminal for Hotend Extruder Heatsinks Makerbot MK7 MK8 CPU Chip Arduino (24V 0.08A)

  • ❃❃ Great replacement item for your all metal hotend or maybe a small cooling fan for your 3D printer nozzle setup..
  • ❃❃ Two terminal cable length is 110 centimeters (110cm). Connector is already fitted and product is out-of-the-box ready for installation..
  • ❃❃ Made of high quality plastics with high end bearings, this 3D printer part cooling fan can run continuously for days at high speeds without hassle or concern..
  • ❃❃ Size:40mm*40mm*10mm(L*D*H), Speed:6000RPM, Noise:27dBA, Bearing: oil, DC 24V, 0.06A..
Check Stock