Top Hrc Plate

Milling Cutter Bit Rotating Bit 6 Pieces Of 3-blade 90 Degree HSS Titanium Chamfering End Mill Cutter Counter Hole Deburring Cone Drill Set 6.3-20.5m Color HSS No Box

  • Material: It has the advantages of high hardness, wear resistance, good toughness and corrosion resistance. It also has stronger heat resistance, so it can maintain hardness even at high temperatures..
  • -The processed debris can be dropped more easily in the chamfering process, without affecting the work efficiency due to tool blockage..
  • -Suitable for workpieces with hardness lower than 25HRC, such as carbon steel, thin iron plate, insulating plate, PVC plate, wood board, etc. Titanium-coated models have higher hardness and longer service life.
  • -The blade can be ground: a more convenient maintenance method allows the tool to be ground without unloading..
  • -The automatic through hole chamfering knife can quickly chamfer both sides of the hole in a few seconds..
Check Stock

Seymour S500 Industrial 20 lb Sledge Hammer

  • NO-SLIP GRIP: Vulcanized rubber handle for secure grip while striking..
  • TRADEMARK GREEN HEAD: Hi-vis, drop-forged 46 HRC steel head endures the most demanding applications..
  • UNBREAKABLE HANDLE TECHNOLOGY: Steel core eliminates breaking during overstrikes..
  • LANYARD HOLE: Safely secure hammer to wrist or stationary object..
  • LIFETIME GUARANTEE: Covered by Wilton's lifetime warranty..
  • SAFETY PLATE: Locks head firmly to handle and prevents head from dislodging..
  • IDEAL FOR: Demolition Work, Driving Fence Posts, Driving Stakes, Fracturing Stone and Concrete, Police, Fire and Rescue, Railroads, Rebar Work..
Check Stock

Wilton B.A.S.H 16\ Sledge Hammer, 6 Lb (20616)

  • ERGONOMIC HANDLE: Shaped and thickened for improved comfort and less vibration..
  • LANYARD HOLE: Safely secure hammer to wrist or stationary object..
  • NO-SLIP GRIP: Vulcanized rubber handle for secure grip while striking..
  • TRADEMARK GREEN HEAD: Hi-Vis, drop-forged 46 HRC steel head endures the most demanding applications..
  • UNBREAKABLE HANDLE TECHNOLOGY: Steel core eliminates breaking during overstrikes..
  • SAFETY PLATE: Locks head firmly to handle and prevents head from dislodging..
  • IDEAL FOR: Demolition Work, Driving Fence Posts, Driving Stakes, Fracturing Stone and Concrete, Police, Fire and Rescue, Railroads, Rebar Work.
Check Stock

Wilton B.A.S.H 36\ Soft Face Sledge Hammer, 14 Lb (41436)

  • TRADEMARK GREEN SOFT FACE HEAD: Drop forged, hi-vis head is hardened to 30 HRC. It is specifically designed to mushroom, not chip, when striking hard base materials..
  • ERGONOMIC HANDLE: Shaped and thickened for improved comfort and less vibration..
  • NO-SLIP GRIP: Vulcanized rubber handle provides a secure grip while striking..
  • UNBREAKABLE HANDLE TECHNOLOGY: Steel core eliminates breaking during overstrikes..
  • SAFETY PLATE: Locks head firmly to handle and prevents head from dislodging..
  • ANTI-VIBE NECK: Tapered design eliminates vibration from striking..
Check Stock

ABC Hammers XHD824S 8 Pound Steel Sledge Hammer with 24\ Steel Reinforced Poly Handle

  • UNBREAKABLE HANDLE TECHNOLOGY: Steel core eliminates breaking during overstrikes..
  • TRADEMARK GREEN HEAD: Hi-vis, drop-forged 46 HRC steel head endures the most demanding applications..
  • NO-SLIP GRIP: Vulcanized rubber handle provides a secure grip while striking..
  • SAFETY PLATE: Locks head firmly to handle and prevents head from dislodging..
  • ANTI-VIBE NECK: Tapered design eliminates vibration from striking..
  • LANYARD HOLE: Safely secures hammer to your wrist or a stationary object..
Check Stock

2 Pack Automatic Center Punch, Pamiso 5.1 Inch Spring Loaded Drill Punch Tool,Brass Window Spring Punch Tool, Fixed Point & Car Window Glasses Break

  • [ One Handed Operation ]: 5.1" Length/ 0.78" Diameter Automatic Center Punch, One Handed Operation, simply adjust to desired spring tension, press firmly against work piece for automatic centre punch..
  • [ Advanced Material ]: Needle: High Speed Steel(HSS)/ Shell: No.45 Steel. Hardness up to HRC58°~65. Features adjustable spring loaded design for variable impact strength and hardened tip for long service life..
  • [ Feature ]: Makes accurate marks without the need for a hammer before punching to prevent the drill bit from running off.
  • also be used for emergency escape, crushing broken windows..
  • [ Widely Application]:Break glass and iron plate/PVC plastic / Steel plate/ wood/ wall positioning, can accommodate various types of materials such as wood, plastic, metal, glass, leather..
  • [ What You Will Get? ]：2* Pamiso Automatic Center Punch..
Check Stock

Wiha 200mm VDE Needle Nose Pliers

  • Made from high quality forged CV tool steel 50/52HRC.
  • Soft vinyl grip handles are oil and solvent resistant.
Check Stock

Hercules Hot Knife Rope Cutter - Electric Benchtop 60mm Thermal Cutting Blade for Braid Fabric Webbing Belting Ribbon & More - Hotknife Hot Wire Cutting Tool & Heat Sealer (110V, 60W)

  • The Hercules HRC60 is suitable for commercial and industrial use, the Hercules HRC60 can cut canvas, synthetic fabric, cloth, rope, cord, webbing, belting, ribbon and much more..
  • The Hercules HRC60 will cut through a 1" nylon rope in less than 10 seconds..
  • The HRC60 operated off of 110 volt DC and it heats up to 1200° Fahrenheit in less than 10 seconds..
  • Kit includes the 60 watt Hercules HRC60 heat cutter, one 60mm cutting blade, hex wrench and wire cleaning brush..
  • The HRC60 has a lighted on/off rocker switch, weighs 3.75 pounds, has a 70” power cord and a maximum cutting width of 60mm (2.25”)..
Check Stock

Stens Lower Mulching Blade Honda 72511-VK6-000 ea 1

  • Replaces: Honda: 08720-vh7-000, 72511-vk6-000.
  • Fits Honda: HRC216K2 HXA, HRC216K2 PDA, HRC216K3 HXA and HRC216K3 PDA.
  • Length: 21 1/4" center hole: 3/4" outer hole: 3/8" center to center: 3 3/4" width: 3 1/2" thickness: .120".
Check Stock

RLECS Metal Positioning Puncher 130mm Golden Window Punch Brass Spring Type Center Punch for Steel, Wood, Plastic Window Glass Breaking Hand Tools

  • Metal Positioning Puncher 130mm Golden Window Punch Brass Spring Type Center Punch.
  • The main body of brass is made of high hardness chrome vanadium steel with a hardness of HRC58 degrees to 62 degrees and a total length of 5.1 inches. The handle diameter is 1/2".
  • Adjustable tension, easy to use, industrial brass center punch with adjustable tension screw, you will be able to use one hand operation.
  • Emergency window escape tools. Automatic center punch is not only suitable for wood and metal, but also can break glass windows, which means you can leave one window in the car and be ready at all times. Just use it in one corner of the window, it will break and fall, or it can be easily pushed out and escape.
  • Very suitable for steel, wood, plastic window glass breaking hand tools. Break the position of glass and iron plate/PVC plastic/steel plate/wood/wall. This industrial brass center punch provides a starting point for your drill, making it easier for you to slip in narrow places.
Check Stock

Folding Pocket Knife, 2.8”D2 Steel Blade and Black Serrated, Carbon Fiber Handle with Thumb Stud Opener-Everyday Carry

  • ▶【High Quality Material】2.8" D2 blade, heat-treated to 60HRC hardness. 3K twill full carbon fiber handle, matte color, provides a high friction comfort touch and stylish style..
Check Stock

JEDIST Flush Cutter, Sprue Cutter, Micro Cutter, ESD Wire Cutter, Stainless Steel Cut Tools with Spring Silicone Handle for Electronics Jewelry Model Craft Soldering Metal Plastic(Jed-05ESD)

  • The type of Jed-05ESD is a universal flush cutter tool. It is a anti-static and demagnetized ESD flush cutter which made of martensitic stainless steel and designed a inverted V-shape edges. The thickness of steel plate is 0.12 inch and the length of cutting edge is 0.51 inch. The rigidity is HRC56-58 and the weight is 2.47 oz. It can cut through copper wire with diameter of 1.3mm and iron wire with 1.0mm. It can cut above 10 AWG stranded electrical wire..
  • This wire cutter is made of martensitic stainless steel (8Cr13MoV).The steel is hardened through heating and quenching. This technology helps to enhance sturdiness and gives it a natural level of resistance against rust and corrosion even in marine, high temperature and humidity environment. The body of steel is heat-treated and bright-treated in vacuum and acid-free condition and its rigidity is 42-50HRC. The blade is heat-treated by high frequency wave and its rigidity is 56-58HRC..
  • The handle of flush cutter is ergonomically made. The cover of cutter grip is made of silicon which is non-slip and flexible. This sprue cutter is loaded a stainless steel spring that returns the jaws to the open position automatically and the joint is lubricated by oil. The cutting blades are perfectly aligned and the ....
Check Stock