Top Hss Drill Bits

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock

ETERNA 246piece Drill Bit Set Titanium HSS Screwdriver Bit Kit, with Carry Case for Metal, Masonry, Wood, Plastics Cement Drilling

  • Full set includes 87 X HSS4241 twist drills, 21 X masonry drill bits, 4 X spade bits , 1 Xspade bit extension 17 X Brad point drill bits,4 X drill stops, 66 X 1inch bits, 30 X 2inch bits, 6 X nut drivers, 2 X hex keys, 1 X counter sink, 4 X hole saws, 1 X arbor adaptor, 1 X nail punch and 1 X bit holder..
  • Suitable for drilling into masonry, wood, metal and plastics and multiple screwdriving and fastening applications..
  • With a wide range of bit sizes and includes the most essential tools of drill bits, screws, a countersink, and more, which will help you get professional results on your next home improvement or DIY project..
  • The drill bit set comes with a portable carry case with a handle on it, which allows for easy transportation.It is designed to keep all components organized and convenient to store..
  • HSS titanium drill bit is coated with titanium on its surface, which increases the hardness of the drill bit, meanwhile strengthens heat dissipation, makes the twist drill bit more wear-resisting. Other parts are made of high quality high speed steel, which features high hardness, good wear resistance and durability. It can be used multiple times without deformation.
Check Stock

3/32-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/32-inch cutting diameter, 1-1/4-inch flute length, 2-1/4-inch overall length, 118 degree point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/32-inch cobalt drill bits with case.
Check Stock

1/4-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/4-inch cutting diameter, 2-3/4-inch flute length, 4-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/4-inch cobalt drill bits with case.
Check Stock

1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/8-inch cutting diameter, 1-5/8-inch flute length, 2-3/4-inch overall length, 135 degree split point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/8-inch cobalt drill bits with case.
Check Stock

3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/16-inch cutting diameter, 2-5/16-inch flute length, 3-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/16-inch cobalt drill bits with case.
Check Stock

5/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 6

  • JOBBER LENGTH: 5/16-inch cutting diameter, 3-3/16-inch flute length, 4-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 6 pieces of 5/16-inch cobalt drill bits with case.
Check Stock

Drill Bits Set/Screwdriver Bit Set, Longmate 226-Piece Drilling and Driving Accessories with Drywall Anchor and Screw, Drill Sets Combo Kit for Wood Metal Concrete Drilling and Screw Driving

  • 【EXCLUSIVELY DESIGNED FOR DIY】226-Pcs tool kit includes all the drill bits/screwdriver bits/anchors screw you need. 12 x HSS 4341 Drills: 2.5/3/3.2/3.5/4/4.5/4.8/5/5.5/6/6.5/8mm, 8 x Masonry Drills: 3/4/5/5/6/6/8/10mm,7 x Brad Point Wood Bits: 3/4/5/5/6/6/8mm, 28 x screwdriver bits, 170 x plastic anchors and screws, 1 x Magnetic bit holder.
  • 【HSS, BRAD POINT & MASONRY BITS】Twist drill bit is made by HSS4341 which is more hard and durable than 4241 for other similar drill bit. Suitable for most metal, wood and plastics Titanium coated for wear resistance and reduced friction. Masonry bits with Tungsten-Carbide tips ensure longer-lasting strength against brick and concrete by breaking up stone and masonry particles. Brad point bit for wood with piercing tips for accurate drilling starts and sharpened edge for easy cutting&churning out.
  • 【WIDE APPLICATION】 All-purpose for use on wood, metal, concrete, masonry, plastic drilling as well as multiple driving and fastening. Ideal for those everyday DIY drilling jobs at home and workshop with a range of drill bits to get the job done quickly and accurately.
  • 【WELL-ORGANIZED】With a side drawer storage box, easy to organize and sort. All accessories are placed in order, no mess.
Check Stock

Drill Hulk 13-Piece M35 Cobalt Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank

  • JOBBER LENGTH: jobber length cobalt drill bit, 135 degree split point reduces drill walking, 3-flat shank provides a secrue grip in chucks.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 13 pieces cobalt drill bits in inch sizes 1/16" to 1/4" (1/64" increments) with plastic case.
Check Stock

YAKAMOZ 30Pcs Thread Repair Insert Kit Damaged Threads Rethreading Drill Bit Taps Tool Set for Helicoil Type Metric M6 Internal Screw Holes Repairing

  • Master helicoil thread repair kit used for creating stronger internal threads in all metals, composites, polymers and other materials by repairing damaged or stripped internal threads and regaining the original thread size..
  • 304 Stainless thread inserts create longer lasting durable threads, increase the possibility of higher torque application in weaker metals..
  • Master thread repair kit includes a collection of tools including HSS drill, tap, thread inserts, installation tool, break pin tool..
  • Metric Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tools.
  • Includes 25 Each thread inserts: M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5.
  • SAE Size: 5pcs HSS drill bits, 5pcs HSS taps, 5pcs break pin tool.
  • Includes 25 Each thread inserts: 1/4''-20, 5/16''-18, 3/8''-16, 7/16''-14.
Check Stock

Yakamoz 5Pcs Taper Drill Countersink Set 1/4 Hex Shank Countersinks with Tapered Point Pilot Drill Bits for Woodworking

  • Quick change 1/4" hex shank for power drill, 7/64", 9/64", 11/64", 3/16", 7/32" HSS taper drill bits ideal for installing screws..
  • Use these countersinks to drill the pilot hole and countersink hole in one step..
  • 4-Flute cutter countersink and tapered drill bit provide superior speed and ideal finish..
  • Adjustable countersink along taper drill to get proper pilot hole depth for different length screws..
  • Made of High Speed Steel (HSS) drill bits with alloy steel countersinks, good cutting performance on hardwoods and composites and long life use..
Check Stock

ENERTWIST Drill Bit Set 246-Pieces Drill Bits and Driver Set for Wood Metal Cement Drilling and Screw Driving Full Combo Kit Assorted in Plastic Carrying Case ET-DBA-246

  • ▲ All-In-One Convenience - Comprehensive, high quality 246pcs drill bits and driver set, Ideal for DIY projects and household maintenance and....
  • ▲ Premium Quality: Bits made from superior HSS material titanium coated for long-lasting strength and durability. Improved flexible holding frame....
  • ▲ Portable & Easy Storage- Compatible with impact drill and drivers. Comes in a tough portable carry case with a distinctive black and orange color....
  • ▲ Variety - Full set includes 4 X Spade drill bits ½” to 1”, 30 X Titanium Coated and 30 X Black Oxide HSS Twist drill bits from 3/64” to....
Check Stock