Top Hss Extra Length Drill

Drill Hulk 13-Piece M35 Cobalt Drill Bit Set for Hard Metal, Stainless Steel, 1/16-Inch to 1/4-Inch, Jobber Length, 3-Flat Shank

  • JOBBER LENGTH: jobber length cobalt drill bit, 135 degree split point reduces drill walking, 3-flat shank provides a secrue grip in chucks.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 13 pieces cobalt drill bits in inch sizes 1/16" to 1/4" (1/64" increments) with plastic case.
Check Stock

Yakamoz 5Pcs Taper Drill Countersink Set 1/4 Hex Shank Countersinks with Tapered Point Pilot Drill Bits for Woodworking

  • Quick change 1/4" hex shank for power drill, 7/64", 9/64", 11/64", 3/16", 7/32" HSS taper drill bits ideal for installing screws..
  • Use these countersinks to drill the pilot hole and countersink hole in one step..
  • 4-Flute cutter countersink and tapered drill bit provide superior speed and ideal finish..
  • Adjustable countersink along taper drill to get proper pilot hole depth for different length screws..
  • Made of High Speed Steel (HSS) drill bits with alloy steel countersinks, good cutting performance on hardwoods and composites and long life use..
Check Stock

Cleveland 950E High Speed Steel Extra Long Length Drill Bit, Black Oxide, Round Shank, 118 Degree Notched Point, 1/2\ Dia. x 10\ Lg (Pack of 1)

  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials.
  • Self-centering 118-degree notched point penetrates material more easily than a conventional point without a pilot hole, and maintains a sharp cutting edge.
Check Stock

Cleveland 950E High Speed Steel Extra Long Length Drill Bit, Black Oxide, Round Shank, 118 Degree Notched Point, 7/32\ Dia. x 8\ Lg (Pack of 1)

  • Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials.
  • Self-centering 118-degree notched point penetrates material more easily than a conventional point without a pilot hole, and maintains a sharp cutting edge.
Check Stock

COMOWARE Screw Extractor & Left Hand Drill Bit Set- Broken Bolt Remover HSS M2, 10pcs with Metal Index Case

  • ... can prolong the service life, enhance wear resistance and remove chippings clearly. HSS are harder and tougher than other materials..
  • UNIQUE DESIGN: The 118°angle makes it easier to cut into the workpiece with small axial resistance. This design can not only increase the length of cutting edge work but also decrease the nominal thickness of cutting layer, which improves heat dissipation and durability with better cutting effect..
  • CONVENIENT ORGANIZATION AND STORAGE: Come with a index case, convenient to use and carry..
  • SET INCLUDING: 5pcs alloy steel screw extractors and 5pcs HSS M2 left hand drill bits. Screw extractor includes #1, #2, #3, #4, #5. Left hand drill bit model includes 5/64", 7/64", 5/32", 1/4", 19/64"..
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • Replacement tapered counter sinker drill bit set 3 Piece #10 (3/16") bit replacement Only (Without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #10 countersink drill bit set for wood , with 1 Hex Wrench (1/8 inch Allen Key) included. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills.
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
Check Stock

40mm HSS Tungsten Carbide Hole Saw, TCT Cutter Drill Bit for Metal Stainless Steel Wood Aluminum

  • ❶SIZE: 40mm(1-9/16”) hole saw diameter, 86mm(3.38”) length, 10mm(0.39”) shank..
  • ❷RESISTANT and DURABLE: hole saw is made of HSS high speed steel, with extremely sharp blade, low consumption and durable with impact resistance, wear resistance..
  • ❸PRECISE and EFFICIENT: tungsten carbide teeth of the hole saw is able to cut clean, round holes in stainless steel, mild steel, iron, aluminum plate, alloy plate, plastic sheet, copper and brass..
  • ❹WIDE RANGE of APPLICATIONS: hole saw kits are suitable for hand-held electric drill, vertical electric drill and mobile belt magnetic drilling machine..
  • ❺ALL IN ONE DESIGN: drill bit, spring, wrench are included, no need to buy extra accessories..
Check Stock

Drill Hulk 7-Piece M35 Cobalt Left Hand Drill Bit Set for Removing Damaged Bolts and Screws, 5/64-Inch, 7/64-Inch, 5/32-Inch, 1/4-Inch, 19/64-Inch

  • STUBBY MECHANICS LENGTH: 135 degree split point reduces drill walking, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for removing damaged bolts and screws, or drilling a pilot hole for a screw extractor.
  • INCLUDE: 2pcs 5/64 inch, 2pcs 7/64 inch, 1pc 5/32 inch, 1pc 1/4 inch and 1pc 19/64 inch cobalt left hand drill bits with case.
Check Stock

uxcell 10 Pcs Split Point High Speed Steel Fully Ground Micro Twist Drill Bits 1mm

  • 10 x Twist Drill Bit : 10 x Twist Drill Bit.
Check Stock

Prolinemax 18 Pc Metric HSS Tap & Drill Set

  • Tap Sizes: M2.5 x 0.45, M3.0 x 0.50, M3.5 x 0.06, M4.0 x 0.70, M5.0 x 0.80, M6.0 x 1.0,M8.0 x 1.25,M10.0 x 1.50,M12 x 1.75.
  • Drill Metric Sizes: 2.05,2.50,2.90,3.30,4.20,5.00,6.70,8.50,10.2mm.
  • Case Overall Dimension: 8''L x 4-3/8''W x 1-1/4''H *Estimate Only*.
Check Stock

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

This is Not A Drill Funny Carpenter Woodworking Mens T-Shirt

  • FTG 4TO12P has Bits Secured with Pin. Drill bits designed as reliable woodworking tools. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Countersink drill bit set for wood with tapered drill bit, 4 Flute cutter, 5 size drill bits sets with countersink #4(7/64") #6(9/64") #8(11/64") #10(3/16") #12(7/32") 2 Stop Collar, 1 Allen Wrench. Counter-bore, and wood plugs size 3/8" and 1/2".
  • Bits Secured with Pin Never Come Loose from shank. Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • DRILL PERFECT tapered hole drill bit every time. Wood drill bit set with counter bore chamfer angle 82-degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality-built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood....
Check Stock