Top Hss Reduced Shank Drills

FTG USA Countersink Drill Bit Set 3 Pc #10 (3/16') Wood Countersink Drill Bit Same Size Set Countersink Tapered Countersink Bit, Quick Change Shank, 1 Hex Wrench, Woodworking Countersink Drill Bits

  • ...ersink cutter #45 Carbon Steel, tapered countersink set features 3 Piece drill set All Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2348 drill bit set hex shank.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 countersink dri....
Check Stock

Annular Cutter Set 6 Pcs, Weldon Shank 3/4”, Cutting Depth 1”, Outside Diameter 1/2 to 1-1/16 Inch, Mag Drill Bits Kit for Magnetic Drill Press by S&F STEAD & FAST

  • Annular cutters made with super tough M2AL high speed steel (HSS) for durability, wear resistance, high efficiency and superior service life.
  • 6 HSS core drills with Outside Diameter in inches: 1/2, 9/16, 11/16, 13/16, 15/16, 1-1/16, all with 1 inch cutting depth.
  • CNC-machined high precision cutters with 3/4 inch Weldon shank (with 2 flats) for secure clamping and edge finish designed for smooth, reamed, burr-free edges of drilled holes. Use a firm steady pressure throughout the cut for best results.
  • Compatible with various brands of magnetic drills including Alfra, BDS, Dewalt, Euroboor, Hougen, Ruko. Caution: if you want to use this annular cutter on a drill press, you need an extra annular cutter arbor. Arbor is not included in this pack.
  • Sturdy plastic case holding 6 annular bits, 1 pilot pin, 1 hex wrench.
Check Stock

Frank O. Gehry: The Complete Works

  • Easily Drills High-Quality Flat-Bottomed And Pocket Holes.
  • Features Optimized Ultra-Sharp Cutting Teeth Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently.
  • Significantly Reduces Cutting Time Compared With Traditional Forstner Bits.
  • Reduced Shank Fits 3/8" And Larger Drills And Drill Presses, 1-1/2" (38.1Mm), 1-5/8" (41.2Mm), 2" (50.8Mm) Forstner Bits.
Check Stock

IRWIN Marples Forstner Bit Set, 14-Piece (1966893)

  • Easily Drills High-Quality Flat-Bottomed And Pocket Holes.
  • Features Optimized Ultra-Sharp Cutting Teeth Specifically Engineered To Cut Through Hard And Soft Woods Smoothly And Efficiently.
  • Significantly Reduces Cutting Time Compared With Traditional Forstner Bits.
  • Reduced Shank Fits 3/8" And Larger Drills And Drill Presses, 1-1/2" (38.1Mm), 1-5/8" (41.2Mm), 2" (50.8Mm) Forstner Bits.
Check Stock

NEIKO 10235B 13/16” Drill Bit for Metal, 1/2” Shank, Silver and Deming, 135° Split Point, High Speed Steel Drilling Bit for Metals, Wood, Plastics, Composite Materials

  • HSS HIGH SPEED STEEL: The high-speed steel material these bits are made of are designed to ensure sharp and fast execution in any material for clean results while making the bit long-lasting, durable, and wear resistant..
  • 135° SPLIT POINT DRILL TIP: The 135-degree split point increases cutting speed with self-centering with no pilot hole and prevents walking while clearing chips and particles faster..
  • 1/2” TRI-FLAT SHANKS: The tri-flat on the shanks of these drills are constructed for tighter chucking to maximize the hold to create precision holes..
  • CHISELED PRECISION CUT: Each of the 13/16 inch drill bits have a precision manufactured cut for accurate drilling and the all-purpose reduced shank has a 1/2-inch chiseled diameter to fit any type of drill chuck with a precise and snug fit..
  • DRILLING TYPES: This 13/16-inch silver and deming drill bit is ideal for drilling into steel, copper, aluminum, brass, wood, oak, maple, MDF, pine, PVC, polycarbonate, acrylic, ABS, nylon, and composite materials..
Check Stock

FTG USA Countersink Drill Bit Set 6 Pc #10 (3/16') Wood Countersink Drill Bit Pro Pack Countersink Set, Tapered Countersink Bit, 1 Stop Collar, Hex Wrench, Woodworking Countersink Drill Bits

  • ...teel, tapered countersink set features 6 Piece Pro drill set Same Size drill bits with countersink #10 (3/16") Adjustable wood countersink, 1 Depth Stop Collar 3/8", 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs size 3/8 inch. Hex shank compatible with 1/4" standard Quick Change chuck including impact drills. FTG 2350P counter sinker drill bit for wood.
  • Wood drill bit set with counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to drill, countersink, and counter-bore in 1 step sink counter set. Counter sink bits designed as to work as wood drill bits.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 coun....
Check Stock

FTG USA Replacement Tapered Countersink Drill Bit Set 3 Pc (#10) 3/16' Countersink Bit Same Size Bit Replacement Only, Countersink Replacement Drill Bit FTG Maximum Torque Wood Bits Secured with Pin

  • .../16") bit replacement Only (Without the 4 Flute cutter countersink counter-bore), made to replace the 3/16” bits of #10 countersink drill bit set for wood , with 1 Hex Wrench (1/8 inch Allen Key) included. Replacement bit countersink with hex shank compatible with 1/4" standard Quick Change chuck including impact drills.
  • Countersink replacement bits made for countersink drill bits for wood. with wider flute for increased chip flow. Replacement drill bits have logo brand name laser printed on each countersink bit quick change 1/4" hex shank. Counter sinker drill bit replacement set, drill bits secured with pin, professional FTG drill countersink set Maximum Torque. Packaging set combination unique design protected by US Copyright Office.
  • Replacement countersink drill bits with pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. All FTG countersinks hex drill bit sets with tapered countersink bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink replacement drill bits designed as to work as wood drill bits. All same size replacement tapered drill bit for drill countersink.
  • THIRD-PARTY TESTED by US Accredited Lab - HSS M2 Grade 6542 drill bit replacement set. Cou....
Check Stock

Chicago Latrobe 790 Solid Carbide Spotting Drill Bit Regular Length Uncoated Bright Finish Round Shank Right-Hand Spiral Flute 120 Degree Conventional Point 1/4 Size

  • Spotting drill bit creates a pilot hole to reduce walking and improve hole accuracy.
  • Solid carbide drills produce close-tolerance holes in hard materials, and have a longer tool life at higher speeds than cobalt and high-speed steel (HSS).
  • Uncoated (bright) finish has no additional surface treatment or coating.
  • 120-degree conventional point drills a pilot hole to accurately guide a 118-degree secondary drill bit.
  • Round shank accommodates most drill chucks.
Check Stock

Drill Bits Set/Screwdriver Bit Set, Longmate 226-Piece Drilling and Driving Accessories with Drywall Anchor and Screw, Drill Sets Combo Kit for Wood Metal Concrete Drilling and Screw Driving

  • .../5/6/6/8mm, 28 x screwdriver bits, 170 x plastic anchors and screws, 1 x Magnetic bit holder.
  • 【HSS, BRAD POINT & MASONRY BITS】Twist drill bit is made by HSS4341 which is more hard and durable than 4241 for other similar drill bit. Suitable for most metal, wood and plastics Titanium coated for wear resistance and reduced friction. Masonry bits with Tungsten-Carbide tips ensure longer-lasting strength against brick and concrete by breaking up stone and masonry particles. Brad point bit for wood with piercing tips for accurate drilling starts and sharpened edge for easy cutting&churning out.
  • 【WIDE APPLICATION】 All-purpose for use on wood, metal, concrete, masonry, plastic drilling as well as multiple driving and fastening. Ideal for those everyday DIY drilling jobs at home and workshop with a range of drill bits to get the job done quickly and accurately.
  • 【WELL-ORGANIZED】With a side drawer storage box, easy to organize and sort. All accessories are placed in order, no mess.
  • 【Perfect Gift】It is definitely a great Birthday or Christmas gifts for men, father, boyfriend, brother and girls who love DIY.
Check Stock

IRWIN Marples Forstner Bit Set, Wood Drilling, 8 Piece (1966892)

  • Easily drills high-quality flat-bottomed and pocket holes.
  • Features optimized ultra-sharp cutting teeth specifically engineered to cut through hard and soft woods smoothly and efficiently.
  • Significantly reduces cutting time compared with traditional forstner bits.
  • Reduced shank fits 3/8" and larger drills and drill presses.
  • Set includes 1/4" (6.3mm), 3/8" (9.5mm), 1/2" (12.7mm), 5/8" (15.8mm), 3/4" (19.0mm), 7/8" (22.2mm), 1" (25.4mm), 1-3/8" (34.9mm) forstner bits.
Check Stock

MAXTOOL 5/8 Twist Drill Bits with Morse Taper Shank HSS M2 Taper Shank Drill Bits Black Oxide MT No 2 TS02B05R40

  • Quality HSS M2 ensures sharp, fast in any material, offers good hardness, toughness, wear resistance.
  • Premium Heat treated HRC63-66 is durable and can withstand heavy duty operation for a long tool life.
  • Black Oxide Surface holds up lubricant better and lead coolant near the cutting edge for smoother drilling.
  • MT shank allows drills installed directly into the machine's spindle for high-torque applications.
  • The drills confirm to one of ANSI/ASME B94.11M, NAS907, and USCTI standard.
Check Stock

MAXTOOL 3/4 Twist Drill Bits with Morse Taper Shank HSS M2 Taper Shank Drill Bits Black Oxide MT No 2 TS02B05R48

  • Quality HSS M2 ensures sharp, fast in any material, offers good hardness, toughness, wear resistance.
  • Premium Heat treated HRC63-66 is durable and can withstand heavy duty operation for a long tool life.
  • Black Oxide Surface holds up lubricant better and lead coolant near the cutting edge for smoother drilling.
  • MT shank allows drills installed directly into the machine's spindle for high-torque applications.
  • The drills confirm to one of ANSI/ASME B94.11M, NAS907, and USCTI standard.
Check Stock