Top Hss Spiral Point Plug

Jerax tools M2 HSS Taper Chucking Reamer 4pcs Set 3/8 1/2 5/8 3/4 Fit 3/8 or 1/2 Shank Chuck Spiral Flute Bridge/Construction Reamer for Steel Alloy Aluminum Wood Plastic

  • [M2 HSS material]: Compared to other commonly used lower grade HSS, M2 has 50% more Tungsten and 150% more Molybdenum, both of which are key elements in improving the durability..
  • [Spiral Flutes & Safety stop]: Left Helix/Right Hand Cut sheers chips away from operator. Safety collar stop to prevent over penetration and operator loss of stability..
  • [Tapered point]: allow entry into overlapping holes..
  • [Application]: enlarge or align existing holes through mild steel, alloys, aluminum, wood, plastic, fiberglass or any similar hardness material prior to rivet or bolt installation. Commonly used in bridge, construction, steel erection/fabrication, and automotive (truck & trailer) industries. Up to 3/8"(10mm) thick mild steel for impact driver or 1" (25mm) thick for Magnetic drill press. Notice: it requires existing hole or a pilot hole would be needed..
  • [Sizes]: 4 pieces, including 3/8" (fit 3/8'' shank chuck), 1/2", 5/8" and 3/4" (fit 1/2'' shank chuck)..
Check Stock

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock

Gunsmithing At Home For Beginners And Novices

  • 49-PIECE MULTIFUNCTIONAL SET- 13+1pcs nut remover set and 3/8"-1/4" hex adapter, 6pcs spiral screw extractors, 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits..
  • VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill t....
Check Stock

WEN PL1326 15-Amp 13-Inch Spiral Benchtop Thickness Planer & JT833H 10-Amp 8-Inch Spiral Benchtop Jointer with Extendable Table

  • Product 1: Spiral cutterhead utilizes 26 staggered and rotatable HSS blades for a clean, smooth finish.
  • Product 1: Onboard material removal gauge informs users about the cutting depth of each pass.
  • Product 1: Plane boards up to 6 inches thick and 13 inches wide.
  • Product 1: 15A motor generates 10,000 RPM at a 26 feet per minute feed rate.
  • Product 2: Spiral cutterhead system utilizes 16 staggered HSS blades for an ultra fine finish.
  • Product 2: Features a spacious 33-by-8-inch table with support arms that extend up to 51 inches.
  • Product 2: Remove 0 to 1/8 of an inch of material with each pass.
  • Product 2: Adjustable 19-3/4 by 4-1/4-inch fence bevels up to 45 degrees.
Check Stock

Champion Cutting Tool Brute Platinum XL22-1/4-20 Heavy Duty Spiral Point Tap: (Individual Pack)- MADE IN USA

  • Heavy duty spiral point taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly Shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life.
  • Recommended for use with Brute xlt Tapper and Brute Lube Fluid. Can also be used in handheld tap wrench.
Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-5/16-18-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-3/8-16-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

amoolo 1/4\ Cobalt Drill Bit(10 Pcs), M35 HSS Metal Drill Bit Set for Hard Metal, Stainless Steel, Cast Iron

  • 【10Pcs 1/4" Cobalt Drill Bits】10Pcs - 1/4”(Dia 6.35mm) x 2-3/4”(Flute Length 69.85mm) Metal Drill Bits.This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and organization..
  • 【M35 Cobalt High Speed Steel】Industry grade 6542 high speed steel drill bit set, harder than 4241 HSS used in other similar drill bits set. These drill bits also contain 5% Cobalt, which increases wear-resistance and durability..
  • 【Fully Ground Process & 135° Split Point】Fully ground spiral groove design clears particles quickly, decreases friction and heat for a faster and cooler drilling performance. 135° split point with straight shank prevents walking and makes drilling precise and faster. No center punch is needed..
  • 【Multiple Application】Perfectly suitable for cutting through Hard Metal such as Stainless Steel, Steel, Sheet Metal and Cast Iron as well as Plastic, Aluminum Alloy, Wood and Other Softer Metals. ✔ Pay attention to speed, pressure and heat control during drilling..
  • 【90 Days Warranty】If you are not fully satisfied for any reason, please contact us for 100% refund or replacement..
Check Stock

Union Butterfield TN1585(UNC) High-Speed Steel Spiral Point Tap, TiN Coated, Round with Square End, Plug Chamfer, H5 Tolerance, 3 Flute, 1/4\-20 Thread Size

  • Spiral point tap pushes chips ahead of tool to reduce clogging.
  • Spiral point and straight flutes for cutting threads in through holes.
  • Titanium nitride (TiN) coating combines hardness with low friction for extended tool life and faster cutting.
  • Relieved-style design reduces friction between tap and workpiece for reduced tool wear.
  • Plug chamfer for easier starting and correct perpendicular alignment.
Check Stock

Topec 49pcs Screw Extractor/Drill Bit Set, Professional Remove Set for Removing Broken Studs, Bolts, Socket Screws and Fittings

  • 49-PIECE MULTIFUNCTIONAL SET- 13+1pcs nut remover set and 3/8"-1/4" hex adapter, 6pcs spiral screw extractors, 13pcs multi-spline screw extractors, and 16pcs left hand cobalt drill bits..
  • VARIOUS SPECIFICATIONS AND SIZES- The set contains four types of 49 models of parts including metric and imperial sizes such as: 13mm, 9/16", 5/8", 17mm, 11/16", 3/4". You can choose the suitable size according to the size of your fasteners to meet various job requirements..
  • HIGH CARBON STEEL AND HSS MATERIAL-The set is made of High carbon steel and HSS materials. The spiral pattern design can provide sufficient gripping force to facilitate removal. High-quality materials can be used for fasteners of various metals. Please note: Cobalt drill bits should not be used for stainless steel..
  • WIDE RANGE OF APPLICATIONS- Spiral flute extractors are perfect for common fasteners. The mult-spline extractors are useful for higher torque and lower profile tools, while the bolt extractors are for freeing partly-exposed fasteners. The kit also includes a left cobalt drill bit for fasteners, which can be used to help drill t....
Check Stock

XEWEA 35-Pieces Screw & Bolt Extractor Set and Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set

  • 35-PIECE Extractor/Drill Bit Set: 13pcs most commonly used multi-spline screw extractors,and 16pcs tough left hand cobalt drill bits,6pcs spiral screw extractors..
  • HSS with Titanium Nitride Coating Drill Bit:135 degree split point and twist design increases cutting speed with self-centering and prevents walking, clears chips and particles faster.NOTE: Cobalt drill bits should not be used for stainless steel..
  • Special Left Hand Design Dill Bit:Creates extra gripping power Unique design for use with screw extractors to remove broken Removes broken studs, bolts, socket screws, and fittings.Include 5/64",7/64",1/8",5/32",3/16",7/32",1/4",9/32",19/64",5/16",11/32",3/8",13/32",7/16",15/32",1/2"..
  • CRMO Material Damaged Screw Extractor:Our screw extractor is made of high quality higher quality chrome molybdenum steel(CR-MO). High hardness good toughness, higher strength than chrome vanadium steel.Easy out style spiral flutes embed themselves to increase grip as resistance increases.Multi-spline extractors in sizes: 1/8", 5/32", 3/16", 7/3....
Check Stock

Union Butterfield 1785NR High-Speed Steel Spiral Point Tap, Non-Relieved Style, Uncoated (Bright) Finish, Round Shank With Square End, Plug Chamfer, M2.3-0.40 Thread Size

  • Spiral point tap pushes chips ahead of tool to reduce clogging.
  • Spiral point with straight flutes for cutting threads in through holes.
  • Non-relieved design for applications requiring close gauging fits, for manual feed rate applications, or for use on older equipment.
  • Produces ANSI standard right-hand threads in metric sizes.
  • Plug chamfer for easier starting and correct perpendicular alignment.
Check Stock