Top Hss Taper Shank Drill

KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4

  • ...ength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
  • 9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
  • 4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
  • arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
  • with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill or machine drill.
  • HSS bi-metal hole saws are much better than and totally different from any carbon steel ones (work on wood only, no metal)..
  • Packed in high quality carrying case. Please note that it shows "HSS M3" on the carrying case but actually it is made of HSS M42 with cobalt 8%. You could see it on the hole saws.DescriptionHSS M42 with cobalt 8% bi-met....
Check Stock

szgate 5PCS Combination Drill Tap Bit Set Screw Tapping Hex Shank HSS MetricImperial Plug Drill Bits Hand Tools 6-32NC, 6-32NC (3.5mm)

  • ...life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us..
Check Stock

6 Pcs HSS Drill Tap Bit Set, Titanium Coated Combination Drill & Taps M3, M4, M5, M6, M8, M10, 1/4\ Hex Shank, for tapping, drill a hole and cut new threads

  • ...life,which can drill, tap, deburr and counter holes on wood, copper, brass, aluminum, sheet metal and plastic.
  • This is a SAE drill tap set, so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. Quick Change ¼-inch (6.35mm) hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Can be used to tap various threads. including 6 SAE sizes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, ¼-20NC,1/4inch hex quick change shank fit Electric hand drill, impact drill, bench drill,electric screwdriver and other tap machine.
  • Easy to Carry and Use,As the Drill Tap Bits set comes with a portable storage case you can carry it anywhere you go. If you encounter any problems or are not satisfied with the products while using our products, please feel free to contact us..
Check Stock

LANTRO JS MT1 to MT2 Morse Taper Drill, Taper Drill Sleeve Reducing Adapter for Lathe Milling Industrial Supplies

  • MATERIAL: The taper drill sleeve is made of high-quality high-speed steel, which is hard and not easy to break, bringing you a better experience.
  • QUENCHING: The product has been quenched as a whole, which has higher hardness and wear resistance.
  • POLISHING: The taper bit sleeve is finely polished, and the excellent surface treatment makes it easier to use.
  • APPLICATION: The drill sleeve is specially designed for the use of Morse taper shank and taper shank drill bits.
  • PACKAGE INCLUDED: 1pc MT1‑MT2 Morse Taper Adapter.
Check Stock

aiyun 6 Pack Drill Tap Metric M3-M10 Tap Set Metric Drill Taps for Steel Aluminum, Sheet Metal and Other Hard Metal Thin Plates(HSS6542)

  • [What You Will Have] Set of 6 tap drill set metric sizes M3x0.5 M4x0.7 M5x0.8 M6x1 M8x1.25 M10x1.5.
  • [Easy Use]Fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, which can drill, tap, deburr and counter holes on aluminum, sheet metal and other hard metal thin plates, greatly save processing steps and time costs, improve working efficiency.
  • [Material] HSS6542 (high-speed steel) + titanium coating. Each tap drill is engraved with a size making, which is convenient for you to choose the size that suits you.
  • [Quick Change] 1/4 inch Hex Shank fits into all power tools more easily and securely, especially for locking into quick change chuck. Hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread.
  • [Guarantee] Here at Rirui-tool we only care about your satisfaction. We try our best to ensure each product is in perfect condition before you get it, but if something is not up to your satisfaction, please contact us for a full refund or replacement.
Check Stock

Sipery 10Pcs M35 Cobalt HSS Twist Drill Bits 3mm with Straight Shank, Drilling for Stainless Steel, Copper, Aluminum Alloy and Softer Materials

  • Specification - 10Pcs 3mm cobalt drill bits, each kit contains a total of ten drill bits in the same size, Blade length: 33mm/1.3inch, 135 degree point, straight shank..
  • Material - HSS Cobalt high speed steel for super abrasive resistance in tough metals, improve much higher heat resistance because of cobalt steel's high red hardness..
  • Durable - HSS Cobalt Drill Bit provide strong durable performance compared to typical hss drill bits..
  • Easy to Carry - The twist drill bits are housed in plastic case for easy storage, easy to carry out homework..
  • Multi-purpose Use - HSS Drill Bits are successful in cutting hard metals such as stainless steel, copper, aluminum alloy, and also can be used for softer materials..
Check Stock

Sipery 10Pcs M35 Cobalt HSS Twist Drill Bits 4mm with Straight Shank, Drilling for Stainless Steel, Copper, Aluminum Alloy and Softer Materials

  • Specification – 10Pcs 4mm cobalt drill bits, each kit contains a total of ten drill bits in the same size, Blade length: 43mm/1.7inch, 118 degree point, straight shank..
  • Material – HSS Cobalt high speed steel for super abrasive resistance in tough metals, improve much higher heat resistance because of cobalt steel’s high red hardness..
  • Durable – HSS Cobalt Drill Bit provide strong durable performance compared to typical hss drill bits..
  • Easy to Carry – The twist drill bits are housed in plastic case for easy storage, easy to carry out homework..
  • Multi-purpose Use – HSS Drill Bits are successful in cutting hard metals such as stainless steel, copper, aluminum alloy, and also can be used for softer materials..
Check Stock

NEIKO 10198A Step Drill Bit Set | 5 Piece, 4mm- 35mm | Metric Titanium High Speed Steel Unibit, Stepper Cone Drill Bit | Two Flute Step Down Bits, 135 Degree Point

  • 135° SPLIT POINT TIP: Each step down drill bit is made with high strength HSS and is black and cobalt-treated for added durability to ensure long service life and longevity. The design of the tip angle increases cutting speed with self-centering and prevents walking off the surface of workpiece..
  • 2 FLUTE DESIGN: This metric stepper drill bit has a two-flute design that clears chips faster, smoother, and allows particles to escape easily making cleaner holes at any worksite..
  • TRI-FLATTED SHANK: Each unibit optimally fits into power tools such as impact drill chucks securely and eliminates slip for higher efficiency of output..
  • HSS COBALT STEP BIT: This step up drill bit set cuts through steel, sheet metal, wood, plexiglass, enlarges a hole, and other surfaces creating relatively clean holes with only a small amount of pressure and deburrs as you drill..
  • MULTIPLE HOLE DRILL BIT: 6 millimeter shank: (9 steps- 4, 5 , 6, 7, 8 ,9 10, 11, 12 mm),(5 steps- 4, 6, 8, 10, 12 mm) and 8mm shank (7 steps- 6, 8, 10, 12, 14, 16, 18 mm),(10 steps- 4, 6, 8, 10, 12, 14, 16, 18, 20, 22mm) and 10mm shank (13 steps- 6, 8, 10, 13, 16, 18, 20, 22, 25, 28, 30, 32, 35 mm)..
Check Stock

6Pcs Combination Drill and Tap Set, Metric Thread M3-M10 Screw Tapping Tool 1/4\ Hex Shank Titanium Plated HSS

  • Applicability: This product includes 1/4 inch hexagon shank HSS drill bits and tap kits. Metric M3, M4, M5, M6, M8, M10 threaded countersunk screws can be tapped together with this drill tap..
  • Material: These drill taps are made of titanium-coated high-speed steel and have a longer service life..
  • Specifications: M3 x 0.5mm pitch, M4 x 0.7mm pitch, M5 x 0.8mm pitch, M6 x 1.0mm pitch, M8 x 1.25mm pitch, M10 x 1.5mm pitch..
  • Design: The drill tap adopts a spiral groove design, and the chip removal process will be better..
  • Accuracy: These drill taps are used for tapping on machines and are usually more precise because human error is eliminated..
Check Stock

AUTOTOOLHOME 6 Pack Titanium Combination Drill Tap Bit Set Screw Tapping SAE 6-32NC 8-32NC 10-24NC 10-32NC 12-24NC 1/4-20NC

  • Titanium Combination Drill taps are made of HSS 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • Three in one operation provides hole drilling, tapping, deburring and countersinking for a quick and complete job on copper, brass, aluminum, sheet metal and plastic.
  • This tap set includes SAE , so it has high versatility. Each tap drill is engraved with a label, which is convenient for you to choose the size that suits you. The convenient ¼-inch (6.35mm) quick change hex shank has a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • 6pcs drill tap set including SAE- 6-32nc, 8-32nc, 10-24nc, 10-32nc, 12-24nc, 1/4-20nc.
  • Storage case is lightweight and durable for easy storage and is portable for all job environments.
Check Stock

ATE PROFESSIONAL SOLID COBALT HEX SHANK QUICK CHANGE DRILL BIT SET 32073 13pc

  • HSS Titanium Coating - Jefe Hex Titanium (TIN) coated Drill Bit can offer 3 times longer life than drill bits without coating..
  • Hex Shank - 1/4 inch Hex shank can be fit in quick-change chuck easily. And it can transit high torque from power tools to the working part of drill bit. Hex shank also eliminates the frustration of shank spinning in chuck. There is an ENHANCED TAPERED WEB in the drill bit that greatly increases the drill bit's strength and reduces premature breakage..
  • Accuracy - 135° split point geometry ensures accurate start and reduces walking on the working surface. Solid bonding technology eliminates radial runout and improves concentricity. High torque, Impact-rated..
  • Multi-Function - Jefe Hex drill bits are built for general purpose applications, such as DIY projects, home maintenance and MRO (Maintenance, Repair and Operations). Ideal for use in steel, copper, aluminum, zinc alloy, cast iron, wood and plastics..
  • Package & Size - 13 Pieces drill bits in a double blister pack with easy opening design. 135° Split- point, hex shank drill bits..
Check Stock

amoolo Hex Shank Drill Bit Set (16 Pcs), Premium 4341 HSS Titanium Impact Hex Drill Bits for Wood, Steel, Metal, Plastic, Quick Change Design (1/16”-3/8”)

  • 【COMBO SET OF 16 PCS】12 most commonly-used sizes (1/16",5/64",3/32",7/64",1/8",9/64",5/32",3/16",7/32",1/4",5/16",3/8") to satisfy all needs, additional piece of 1/16", 5/64", 3/32" and 1/8"for easy replacement. Total 16 Pcs hex shank twist drill bit set come with a portable plastic case for easy select, storage and carry..
  • 【ADVANCED HSS TITANIUM COATING】Industrial grade 4341 high speed steel drill bits set, harder than 4241 HSS and has stronger cutting capacity. Titanium coating increases wear-resistance and durability..
  • 【FULLY GROUND PROCESS & 135° SPLIT POINT】Fully ground spiral flute discharge scraps quickly, reduce friction and heat, therefore provides a faster, cooler and more efficient drilling performance.
  • 135° Split Point with straight shank prevents slippage and makes drilling stable and precise. No center punch is needed..
  • 【QUICK CHANGE】1/4"(6.4mm) hex shank base well fits into majority pistol drill and drill press, more easily and securely installation without slippage and shedding..
  • 【MULTIPLE APPLICATION】Small Drill bits for wood, plastic, steel plate ≤ 5mm, aluminum alloy and other soft metals..
Check Stock