Top Hub Oil Seal

XUANYUDG0769 Golf Cart Front Wheel Hub Bearings and Oil Seals Kit for EZGO TXT 1976-up Gas and Electric,OEM# 50892-G1,25146-G1, 70895G01 Set of 2

  • Applicable Vehicle: Fit for EZGO TXT 1976 & UP GAS & ELEC Golf Cart with Hub # 70895G01.
  • Package Included: 4xWheel Bearing Cones,4xWheel Bearing Races (OEM # 50892-G1) ,2 x Hub Oil Seal(OEM # 25146-G1) (2 Set), 2x plug. Please check the list before ordering.
  • Replaces OEM Part Numbers:OEM#50892-G1,25146-G1,70895G01.
  • Accessories are factory OEM replacement, fit perfectly for your ezgo txt 1976-upcart.
  • XUANYUDG0769 is a professional manufacturer for golf cart accessories. We're committed to providing excellent quality products for global customers. If you have any question about installation or any other questions, please contact us via amazon. We will provide 24-hours online service..
Check Stock

Bearing Buddy 43102 Chrome Bearing Protector - 2.328\ Diameter, Pair

  • Rugged, dependable wheel hub delivers smooth, trouble-free trailering.
  • Galvanized, one-piece cast hub comes with pre-greased bearings, seals, dust caps, cotter pin, and lug nuts.
  • Five UHI lugs, lug nuts on a 4 ½-inch bolt pattern, ½-inch-20 studs.
  • Bearing, race, and seal codes: Inner Bearing Code: L44649.
Check Stock

VIRTIONZ Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle -2pack

  • Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1".
  • 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4".
  • 2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
Check Stock

Southwest Wheel R30484X 84 Spindle & 6-5.5\ Bolt Circle Trailer Hub

  • Round R40842X 42 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using 25580 inner and 15123 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 42 Spindle, Spindle width =2" Spindle length=8" Overall length =13" Capacity (pair) 4,000 lbs..
Check Stock

The ROP Shop Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement Trailer Axle Kit Assembly with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (1) Idler Hub with Lug Nuts, (1) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (2) Inner/Outer Bearings, (1) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (1) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop Pack of 4 Trailer Axle Kits with 4 on 4 Bolt Idler Hub & 1 Round BT8 Spindle

  • Replacement (Pack of 4) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (4) Idler Hub with Lug Nuts, (4) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (8) Inner/Outer Bearings, (4) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (4) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 2) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (2) Idler Hub with Lug Nuts, (2) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (4) Inner/Outer Bearings, (2) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (2) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

The ROP Shop (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle

  • Replacement (Pack of 8) Trailer Axle Kits with 4 on 4" Bolt Idler Hub & 1" Round BT8 Spindle.
  • Specs - 1,250 lb Hub Capacity, Used On 2,000 lb Axle Shaft 1 Diameter: 1 1/4" Shaft 2 Diameter: 1" Shaft Length: 8 3/4" (4" Long Stub) Hub A Diameter.: 2 1/2" Hub B Diameter: 5 1/2" Bolt Pattern: 4". Refer to images 2 & 3 for more information.
  • Includes - (8) Idler Hub with Lug Nuts, (8) 1" BT8 Round Spindle with Castle Nut, Pin & Washer, (16) Inner/Outer Bearings, (8) Double-lip Grease Seal (1 1/4" I.D. / 2" O.D.), (8) 2" Grease/Dust Cap.
  • Assembly with 4 on 4" bolt idler hub & 1" round BT8 spindle. Rated to 1,250 lbs. each or 2,000 lbs. for the pair.
  • Fits 2,000 pound trailer axles with straight spindles, but to know if this hub is the right fit for your setup you would want to check the size your current bearings and make sure that they match up with the 1" bearings that these hubs come with as well as knowing that you have a standard length spindle. This Hub fits standard length spindles, not "short spindles".
Check Stock

Seachoice 53021 1 Inch Trailer Wheel Galvanized Hub Kit – 4 Lug – 1,250 Pound Capacity – Pre-Greased

  • Bearings and hub cavity are 100 percent pre-greased.
  • Includes bearings, seals, dust caps, cotter pin, and lug nuts.
  • Hot dip galvanizing process offers superior resistance to corrosion.
  • Grease seal and bearings are pre-assembled.
  • 4 lug wheel hub – 4 lug nuts on a 4 inch bolt pattern.
Check Stock

ECCPP New Front Wheel Hub Bearing Assembly 515003 fit for Ford Explorer (Sport Trac) Ranger, Mercury Mountaineer, Mazda B3000 B4000 4WD w/ABS 5 Lug 3 Flange Bolt 2pcs

  • ...car. High quality wheel hub assembly make you enjoy your vehicle in a safe and smooth.
  • PREMIUM FEATURES - ECCPP wheel bearing assemblies manufactured by high-quality materials for ensuring precisely matches, durability, reliability and premium performance. The high-quality seal design provides superior anti-pollution protection, ensuring that the hub bearings are clean, long lasting and minimizing noise and vibration. Wheel bolts with protective coating that helps prevent rust and corrosion and makes it easier to disassemble and properly twist the wheel nuts.
  • SERVICE WARRANTY - 1 year warranty, support replace, return and refund service.
Check Stock

SOUTHWEST WHEEL 5-Hole, 4.5\ Bolt Circle Idler Hub for 2,000 lb. Axles (BT8 Spindle) 1\ Spindle

  • Round R30484X 84 Spindle & 6-5.5" Bolt Circle Trailer Hub..
  • 6 studs 5.5" Bolt circle using L68149 inner and L44649 outer bearing hub..
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts..
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs..
Check Stock

Rigid Hitch Trailer Hub Kit - for 1-3/8\ Inner / 1-1/16\ Outer Tapered Spindle - 5 Bolt on 4-1/2\ Bolt Circle

  • Round R30484X 84 Spindle & 5-4.5" Bolt Circle Trailer Hub.
  • 5 studs 4.5" Bolt circle using L68149 inner and L44649 outer bearing hub.
  • Includes Hub, inner bearing, outer bearing, seal, grease cap & lug nuts.
  • 84 Spindle, Spindle width =1 3/4" Spindle length=4" Overall length =8 7/8" Capacity (pair) 3,000 lbs.
Check Stock