Top Humidity Sensor For Raspberry Pi

Sipytoph 37 in 1 Sensor Kit,37 Sensors Assortment Modules Starter DIY Kit with Box for Arduino Raspberry Pi 4 Pi 3,3B,,RPi A,Model B,B,

  • This sensor kit includes 37 sensor modules for you to learn basic knowledge about Raspberry Pi and sensors..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic..
  • Professional 37-in-1 Sensor Module Kit, Not only compatible for Arduino, but also compatible for Raspberry Pi 3,3B+,RPi A,A+,Model B,B+,2..
  • The highest cost performance kit for electronic hobbyist and advanced learners to expand Raspberry Pi and for Arduino programming..
  • With a detachable lattice plastic storage box, it is very easy to store and carry..
Check Stock

LoveRPi Ultra Wide Angle Camera for Raspberry Pi 4/3/2/Zero W (5MP, 220 FOV)

  • ULTRA WIDE ANGLE 220* CAMERA FOR RASPBERRY PI: Record crystal clear 1080P videos and capture 2592 by 1944 photos with our high performing camera for the Raspberry Pi board family. Equiped with large 1.4 by 1.4 micron sensor pixels, this module is designed for ultra wide angle, low latency, and high quality imaging required for computer vision, streaming media, and remote data acquisition..
  • INTEGRATED IR FILTER: Infrared light is invisible to the naked eye but will cause hue changes to CMOS camera sensors. The integrated filter prevents infrared light from distorting the image hue resulting in color accurate imagery for daytime outdoor applications..
  • AUTOMATIC IMAGE CONTROLS: This module will intelligently adjust white balance, exposure, sensitivity, black levels to optimize for best image quality. Additionally, it has built-in 50Hz/60Hz anti-flickering, lens correction, and defective pixel cancelling functions..
  • SIMPLE INSTALLATION FOR ALL PI MODELS: Two FPC cables of different length for Raspberry Pi 4, Pi 3, Pi 2, Pi B+ are included. PFC cable adapter for Raspberry Pi Zero, Pi Zero W, and Pi 0WH are also included. Open a terminal, type in "sudo raspi-config.
Check Stock

Raspberry Pi HQ Camera Module with Case for Raspberry Pi 4B/3B+/3B/2B/A+/Zero/W/Zero WH,12.3MP IMX477 Sensor Support C- and CS-Mount Lenses, Alternative for Raspberry Pi Camera Module V2 (8 Items)

  • This Raspberry Pi High Quality Camera is the latest camera board from Raspberry Pi Foundation.It is compatible with All Raspberry Pi series boards (Raspberry Pi 4B/3B+/3B/2B/A+/Zero/Zero W/Zero WH,etc.).
  • Higher Resolution & Sensitivity Camera Module---Compared To 8MP Of Normal Raspberry Camera, The High Quality Camera Offers Up To 12.3MP, Along With Nearly 50% Greater Area Per Pixel, Delivering Better Imaging Effect..
  • It adopts the IMX477R sensor, and requires a C- or CS-mount lens to work..
  • It could be an ideal alternative for the Raspberry Pi Camera Module V2. It suits industrial and consumer applications like security camera, and other specialist optical devices which require higher level of visual fidelity..
  • Package Content: 1.Raspberry Pi High Quality Camera main unit. 2.C-CS adapter. 3.Dust cap. 4.FPC ribbon. 5.Screwdriver. 6.Packing box. 7.Raspberry Pi Zero V1.3 Camera Cable 15cm. 8.Raspberry Pi Camera Matching Case..
Check Stock

Arducam Raspberry Pi Noir Camera Module, 8MP IMX219 RPi-CAM-V2 Night Vision for Raspberry Pi 4B, 3B+, 3B, 2B, Pi Zero & W

  • Raspberry Pi Noir Camera: This 8MP HD camera module is designed for Raspberry Pi with IMX219 8MP pixel sensor with a fixed focus lens. The difference from the regular V2 is that it does not have an IR filter..
  • 8MP More than HD: Supports 3280 × 2464 pixel still images, as well as 1080p30, 720p60, and VGA90 video modes, and still captures. EFL: 2.5mm.
  • Wide Compatibility: The PiNoir camera is compatible with all Raspberry Pi series boards, which can be easily used with a simple configuration. Please note: This camera module is only supported with the latest Raspberry Pi OS Bullseye (released on January 18, 2022) and libcamera, not with the previous Raspberry Pi OS (Legacy)..
  • Especially for Night vision: The NoIR camera does not have an infrared (NoIR) filter on the lens, making it ideal for infrared photography and photography in low-light (twilight) environments..
  • Easy to Setup: The package comes with a 15cm and 50cm 15pin FPC cable for Pi 1-4B, and a 15cm 15-22pin FPC cable for Raspberry Pi Zero and Zero 2W. Simply connect the Raspberry Pi board and camera with the FPC cable and you can easily use this 8MP high-quality camera..
Check Stock

Aoicrie for Raspberry pi Zero Camera Module 5MP 1080p OV5647 Sensor Video Compatible with Pi Zero Ribbon Cable&FPC Cable for Raspberry Pi Model A/B/B+,Pi 2 for Raspberry Pi 3,3B+ Pi Zero/Zero W Pi 4

  • for Raspberry Pi Zero CSI Camera Module with Fixed Focus Lens Camera module for Raspberry Pi, Fully compatible for Raspberry Pi A, B, B+, 2, 3, 3B+.Pi 4.Zero Zero W and 720p The camera is supported in the latest version of Raspbian,the for Raspberry Pi's preferred operating system.Work natively with all for Raspberry Pi models for your new project or drop-in replacement..
  • High-Definition video camera, The sensor itself has a native resolution of 5 megapixel. In terms of still images, the camera is capable of 2592 x 1944 pixel static images, and also supports 1080p @ 30fps, 720p @ 60fps and 640x480p 60/90 HD video recording.Easy plug and play type capability，Can be applied to image recognition and image tracking..
  • Both cables 2 cables included between the camera connectors for the Pi Zero and Model A&B series,The module attaches to for Raspberry Pi, by way of a 15 Pin Ribbon Cable, to the dedicated 15-pin MIPI Camera Serial Interface (CSI), which was designed especially for interfacing to cameras.15CM Golden Ribben Flex Cable for Raspberry Pi Zero Zerow, model: FPC.
  • 5.90in/15cm and 19.68in/50cm white camera cable for Raspberry Pi Model A/B/B+, Pi 2 and for Raspberry Pi 4 3, 3B+, model: FFC.The C.
  • Connect the included ribbon cable to the CSI (Camer....
Check Stock

Arducam Raspberry Pi Camera Module 3 Wide, 120°(D) IMX708 Autofocus Pi Camera V3 with Acrylic Case, 15cm 15-22 Pin FFC Cable

  • Compatible with all Raspberry Pi boards: Raspberry pi camera v3 works with all Raspberry Pi models, 4B/3B, Pi Zero W/2 W..
  • Based on IMX708 sensor with HDR, 4608 x 2592 is the highest resolution you can get for still images, 1080p50 max for video..
  • The autofocus of pi cam v3 is achieved by a mixture of PDAF and CDAF, ensuring crisp and clear images..
  • Fully support libcamera and Picamera2, and uses CSI-2 serial data output with 2-wire serial communication for seamless integration..
  • Come with a 15cm 15-22pin camera cable, especially for Raspberry Pi zero 2 w.
  • also an acrylic camera case included, easily mount on any tripod with 1/4"-20 mounting screws..
Check Stock

Raspberry Pi Noir Camera Module V2 8MP 1080P for Raspberry Pi 4, 3 B+, 3B, 2B, Pi Zero RPi Infrared Night Vision

  • NEW RASPBERRY PI CAMERA MODULE V2: MX219 8-megapixel sensor with fixed focus lens, which is not only a resolution upgrade, but also a leap forward in image quality, color fidelity, and low-light performance..
  • HIGHER RESOLUTION: NOIR Camera V2, Capable of 3280 (H) x 2464 (V) still picture resolution and supports 1080p30, 720p60, 640×480p90 and VGA90 video modes. No infrared filter, supports night vision..
  • BETTER COMPATIBILITY: This RPi camera module supports all models of Raspberry Pi 4, Raspberry Pi 3, Raspberry Pi 2 and 1 and Jetson Nano Developer Kit..
  • WILD APPLICATION: This pi camera can be used to take high-definition videos as well as still photographs. It can capture IR photographs, better performance in the night and low light vision, especially suitable for wildlife photography, home security and surveillance, NDVI in agriculture, etc..
  • PACKAGE LIST: An 8mp Raspberry Pi official NOIR camera V2 with a 15cm original FFC cable..
Check Stock

Waveshare Compute Module IO Board Plus Development Composite Breakout Board for Developing with Raspberry Pi CM3 CM3L Various Common Use Components

  • The Compute Module IO Board Plus is a development board which you can plug a Raspberry Pi Compute Module into, and make use of the resources of Pi more flexibly. It is compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation, along with various common use components..
  • Compatible with the Compute Module IO Board V3 from the Raspberry Pi Foundation Raspberry Pi GPIO header, for connecting sorts of Raspberry Pi HATs.
  • connectivity, also supports shields 1-WIRE interface, for connecting single-bus devices like DS18B20 4x keys, 4x LEDs, 1x Buzzer, for I/O testing.
  • Onboard USB HUB, allows connecting more USB devices IR receiver, IR remote control is available Onboard USB TO UART, for serial debugging Sensor interface.
  • 10-bit ADC, 38KSPS, 11-ch (6-ch for interface, 5-ch for sensors) 16-bit DAC, 2-ch Onboard RTC, one of the most common and useful functions.
Check Stock

16 in 1 Project Super Starter Kits Sensor Modules Kit for Arduino Raspberry for UNO R3 Mega2560 Mega328 Nano Raspberry Pi 3 2 Model B K62 (16 in 1)

  • THE MOST COMPLETE SMART HOME KIT--This universal kit are compatible for Arduino UNO R3 / Mega2560 / Mega328 /Nano / Raspberry Pi, it could DIY 16 projects according to your need..
  • Those sensors will often being used in the beginner's project. It is included sound and obstacle avoidance sensor, obstacle avoidance sensor, temperature and humidity sensor, ultrasonic, a path tracing module and infrared human body induction sensor..
  • This has 16 sensors modules and delicately selected sensors to detect temperature, humidity, sound, light, infrared, motion, flame, vibration, digital touch, air pressure and many other commonly-used sensors modules..
  • We eliminate many old-fashioned sensors which have low reliability and duplicate function as other sensor in the kit, the UMLIFE modules sensor kits are choosed carefully for our user..
  • With this kit, we will take you from knowing to utilizing, you are able to do more experiment, get your more idea into real action without the restriction of hardware and software. ❃❃ Any questions, you can contact us and we will give you a satisfied solution..
Check Stock

OctagonStar 18pcs Raspberry pi 2 B+ Sensor Module Board Package 18 Kinds of Sensor Set kit

  • 18 Sensor Module Kit for Raspberry Pi 2..
  • OctagonStar Quality Assurance.Item package or product surface have OctagonStar brand identity..
Check Stock

High-Precision AD/DA Expansion Board for Raspberry Pi 4B/3B+/3B/2B/Zero/W/Zero WH and Jetson Nano,Add High-Precision AD/DA Functions to Pi. Onboard ADS1256 8-CH 24bit ADC and DAC8532 2-CH 16bit DAC

  • There’s no AD/DA function on the Raspberry Pi GPIO interface, this may trouble you in the Pi development. However, it won’t be a problem anymore. The High-Precision AD/DA Board allows you to add high-precision AD/DA functions to the Raspberry Pi..
  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards, Jetson Nano.
  • Onboard ADS1256, 8ch 24bit high-precision ADC (4ch differential input), 30ksps sampling rate Onboard DAC8532, 2ch 16bit high-precision DAC.
  • Onboard input interface via pinheaders, for connecting analog signal- the pinout is compatible with Waveshare sensor interface standard, easy to connect various analog sensor modules.
Check Stock

Arducam Raspberry Pi HQ Camera for Raspberry Pi, 12.3MP IMX477 High Sensitivity CMOS with C-CS Adapter and Tripod Mount for Raspberry Pi 4 Model B, Pi 3/3B+, and Pi Zero 2W

  • High Quality Camera: Compared with Raspberry Pi Camera Module V2, this camera module offers higher resolution, up to 12.3MP. Also adopting 12.3MP IMX477 sensor for shape image, resolution 4056*3040 pixels, frame rate 30 fps@1080p, 60fps@720p, VGA90 video modes, IR Sensitivity..
  • Wide Compatibility: The IMX477 camera module is not only compatible with all models of Raspberry Pi 1, 2, 3 and 4, but also with Raspberry Pi Zero and Zero 2W, which can be easily used with a simple configuration. Note: This camera module supports the latest Raspberry Pi OS Bullseye (released on Jan 28th, 2022) and libcamera apps, not for the previous Raspberry Pi OS (Legacy) users.).
  • Easy to Setup: Only a driver away from Plug-and-Play, just use the 15-22pin FPC Cable included in the package to connect the Raspberry Pi 4B/3B and camera. If you connect with the Raspberry Pi Zero and Zero W2, the 22-22pin FPC cable is needed..
  • Package included: Come with a C-CS adapter that supports the use of C-mount and CS-mount lenses. It also includes a tripod adapter that is compatible with any tripod with standard 1/4"-20 mounting screws, this allows the camera to be secured anywhere you want..
  • Application: This Raspberry Pi HQ camera can be used to monitor 3D printer, and many other vis....
Check Stock