Top Humidity Sensor I2c

GY-521 MPU-6050 MPU6050 Module, 3 Axis Accelerometer 6 DOF Gyroscope Sensor Module Kit 16 Bit Converter Data Output IIC 3-5v Compatible with Arduino (10 Pieces)

  • GY-521 MPU-6050 module: integrates 3-axis gyroscope and 3-axis accelerator, including the hardware accelerator engine for devices connected to the second I2C port, like another accelerator of other brands, magnetometer, or Digital Motion Processor (DMP) of other sensors.
  • Parameter range: the MPU-6050's angular velocity range is ±250, ±500, ±1000 and ±2000°/sec (dps) for accurate fast and slow motion, and user-programmable accelerator full-frame sensing the range is ±2g, ±4g±8g and ±16g.
  • Transmission can pass I2C up to 400kHz or SPI up to 20MHz.
  • Chip built-in: with three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs.
  • Easy to use: the measured values of the sensor can be interrogated by the I2C interface.
  • The accelerometer can be operated at both 3.3V and 5V.
  • Compatible with Arduino and Raspberry Pi.
  • Universal usable: the sensor can be applied to develop various entertaining applications and systems.
  • Nice for projects with gaming and virtual reality devices, navigation (for drones and RC planes) and DIY robots.
Check Stock

6pcs GY-521 MPU-6050 MPU6050 Module 3 Axis Accelerometer Gyroscope Sensor Module 6 DOF MPU-6050 16Bit AD Converter Data Output IIC I2C DIY Kit for Arduino

  • 【GY-521 MPU-6050 Module】Integrates 3-axis gyroscope and 3-axis accelerator, including the hardware accelerator engine for devices connected to the second I2C port.
  • 【Built-in Chip】With three 16-bit analog-to-digital converters (ADCs) for digitizing the gyroscope outputs and another three ones for digitizing the accelerometer outputs..
  • 【Easy to use】The measured values of the sensor can be interrogated by the I2C interface. The accelerometer can be operated at both 3.3V and 5V. Suitable for Arduino and Raspberry Pi..
  • 【User-programmable Gyroscope】With a full-scale range of ±250, ±500, ±1000, and ±2000°/sec (dps) and a user-programmable accelerometer with a full-scale range of ±2g, ±4g, ±8g, and ±16g Supports the I2C serial interface and has a separate VLOGIC reference pin..
  • 【Universal Usable】The sensor can be used to develop various entertaining applications and systems. Ideal for projects with gaming and virtual reality devices, GPS navigation (for drones and RC planes) and DIY robots..
Check Stock

EC Buying GY-SGP30 Gas Sensor, Air Quality Carbon Dioxide Formaldehyde Monitoring TVOC CO2 Gas Sensor Module, a Digital Multi-Pixel Gas Sensor for Indoor Air Quality Monitoring,co2 Sensor Arduino I2C

  • ♥GY-SGP30 gas sensor is a multi-pixel gas sensor for indoor air quality applications with excellent long-term stability, I2C interface with TVOC and CO2eq output signals, very small 6-pin DFN package: 2.45 x 2.45 x 0.9 mm3, Low Power: 48 mA at 1.8V, Reflow Solderable.
  • ♥ Product parameter range：① Power supply voltage VDD: ‑0.3V to +2.16V ②Power supply voltage VDDH:‑0.3V to +2.16V ③Storage temperature range: ‑40 to +125°C ④ Operating temperature range: ‑40 to +85°C ⑤ Humidity range: 10%‑95% (non-condensing).
  • ♥ Product features:1. Supply voltage 3.3V or 5V.
  • 2.IIC communication interface, 3. Imported highly sensitive SGP30 formaldehyde sensor, chip power supply voltage is 1.8V.
  • 6. The onboard 1.8V LDO chip supplies power to SGP30, so the input power can be 3.3V or 5V 7. Product pins: VCC (3.3-5V), GND, SCL, SDA (4 pins in total).
  • ♥ Product use: SGP30 module can be used in air quality detectors, formaldehyde detectors, portable gas detectors, various DIY designs, etc..
  • ♥ packing list: 1X GY-SGP30 Gas Sensor1x4 pin header.
Check Stock

GeeekPi 2Pack LCD 2004 Module with I2C Interface Adapter Blue Backlight 2004 20x4 LCD Module Shield for Raspberry Pi Arduino Uno

  • The LCD has always been a device that acts as a window in human-computer interaction. For example, the prompt window on some instrument devices, the temperature and humidity prompt box, the device running status monitor, and the prompt screen of the counting device all have LCD figures..
  • The common LCD1602, LCD2004, and LCD12864 are fabricated using liquid crystal materials and communicated using the I2C bus..
  • It is a high-performance serial bus with bus rules and high-speed or low-speed device synchronization required for multi-master systems. The I2C bus has only two bidirectional signal lines, a serial data line (SDA) and a serial clock line (SCL)..
  • Compatible with all devices with I2C interfaces, such as Arduino, raspberry pi, beagle bone black, tinker board, stm32, esp32 and more..
Check Stock

Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055

  • Meaningful sensor data in minutes with Bosch's smart BNO055 smart 9-ODF sensor.
  • Absolute orientation, angular velocity, acceleration, magnetic field strength, linear acceleration, gravity, temperature.
Check Stock

Inkbird Digital Temperature Probe Controller ITC608T Thermostat 120V 15A 1800W Pre Wired AC Dual Stage Outlet 12 Period Timer Stage

  • US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
  • Three in one Multifunctional Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • Multifunctional usage. Temperature and humi....
Check Stock

WILLHI WH1436H 110V Digital Air Humidity Controller with LCD Display High Accuracy Humidity Sensor & 118 Power Cable Humidification Mode & Dehumidification Mode+1pc Extra Sensor

  • 2 Modes to keep Designed Humidity: This digital humidity controller can help you turn on/off your equipment at desired humidity. You can choose....
  • Accurate Humidity Sensor: Each controller comes with a humidity sensor of high accuracy. The length of the cable is 3 meters so that the sensor can....
  • LCD display & Sensitive Humidity Alarming : The humidity controller has high/low humidity alarm function. If the humidity is too high or too low, it....
  • 100% Satisfaction Guarantee: It can be directly plugged in the outlet without any cables so that it can be used instantly. It’s widely used with....
  • One extra sensor packed:More convenience if needed to replace it..
Check Stock

ACEIRMC CJMCU-811 CCS811 Low Power Carbon Monoxide Air Quality Monitoring Digital Internal Gas Sensor Module Control Board I2C

  • Digital sensor for measuring changes in VOCs, in particular Carbon Dioxide (CO2).
  • Simply supply power, connect WAK to Ground, and connect the SDA and SCL pins to the I2C pins on your Arduino, ESP8266, Raspberry Pi, etc..
  • Operating voltage of 3~5VDC. 2C address 0x5A.
  • Easy to use on a breadboard with the included 8-pin header.
  • CCS811 Carbon Monoxide (CO) Breakout Board for Arduino Raspberry Pi ESP8266 I2C 3~5VDC CJMCU-811 CCS801.
Check Stock

Inkbird Combination Temperature and Humidity Controller ITC-608T Digital Pre-wired Outlet Humidistat Thermostat, 120V 15A 1800W, 12 Period Time Dual Stage w/Sensor

  • 1.√US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL listed, and rigorously tested for quality control and safety. The unit itself has 2 years warranty. (The temperature and humidity sensor have 1 year warranty.).
  • 2.√Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • 3.√Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • 4.√More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
Check Stock

Amprobe - 3311871 TH-1 Compact Probe Style Relative Humidity Meter

  • Relative humidity (RH), temperature, wet bulb, and dew point meter is used for HVAC, indoor air quality, and environmental applications.
  • Dual-scale thermometer measures wet- and dry-bulb temperature and dew point in F and C.
  • Capacitive humidity sensor ranges from 0 to 100 percent relative humidity (RH).
  • Data hold for recording data, and minimum and maximum temperature readings.
  • Sensor: Electronic Capacitance Polymer Film Sensor.
  • Range Temperature: -20 to 50°C (-4 to 122°F).
  • Accuracy Relative Humidity: ±3%RH from 10 to 95%RH, +5%RH (0 to 10, 95 to 100%RH) @ 25°C (77°F) non-condensing.
Check Stock

Inkbird Temperature ＆ Humidity Controller ITC-608T Pre-wired AC Dual Stage Outlet Thermostat Humidistat with 12 Period Time Stage 120V 15A 1800W Cooling/Heating and Humidifier/Dehumidifier

  • Multifunction usage. Temperature and humidity controller ITC-608T can be used in home brewing (refrigerator), fermenting, Greenhouse, terrarium, reptile, planting (mushroom), meat storage and cooking..
  • More power up to 1800W. Temperature control range is -40-212°F(-40-100℃), humidity display range is 5 -99.0%RH. Max Loading: 120V 15A 1800W. Temperature senor is waterproof while humidity sensor is not..
  • Supporting calibration, compressor delay and saving reset setting values. Centigrade or Fahrenheit degree display, easy to set, PV and SV dual display windows. And with compressor delay for protecting cooling device. ITC-608T can save the original setting values in case accidentally power-off..
  • Three in one Multifunction Temperature and Humidity Control Mode with Dual Relay Output. ITC-608T can work as a temperature controller, a humidity controller, a temperature and humidity controller. First, only plug temperature sensor with cooling and heating equipment. Second, only plug humidity sensor with humidifier and dehumidifier equipment. Third, plug both temperature and humidity sensor with cooling/heating and humidifier/dehumidifier equipment..
  • US ETL Certificate Listed and Warranty. ITC-608T thermostat temperature and humidity controller is ETL list....
Check Stock

WiFi Thermometer Hygrometer, IBKINXX Smart Temperature Humidity Meter with APP Alert Notification, Data Storage Export Wireless Temperature Sensor, Remote Humidity Monitor for Home Baby Room Incubator

  • 【Smart APP Control WiFi Hygrometer】IBKINXX WiFi thermometer can monitor temperature and humidity data from your cell phone. Real-time data is updated to the U.S. terminal, allowing you to be more responsive to changes in indoor temperature and humidity. Unlimited sensors can be added to one cell phone. (5G WiFi is not supported).
  • 【High Accuracy and Fast Refresh Time】This humidity temperature sensor are equipped with a Swiss-made sensor that provides accurate readings. Temperature sensor accuracy error range: ±0.3℃/±0.5℉.
  • Humidity sensor accuracy error range: ±3%RH. Temperature and humidity can be manually calibrated. Enjoy accurate data from the hygrometer thermometer every 2 seconds.
  • 【Timely Alarm Notification】Preset temperature and humidity range, when the remote temperature monitor monitors the ambient temperature or humidity exceeds the standard, APP, SMS, or phone call to alert you the first time, helping you to respond faster to sudden changes in the basement, greenhouse, etc.
  • 【Free Data Storage and Export】Check the temperature and humidity by bar graph or curve graph according to the desired time range. The humidity and temperature sensor uploads the collected data to the server every hour and supports data collection ....
Check Stock