Top Hvac Temperature Probe

WhisperKOOL Platinum Split System 4000 Fully Ducted Wine Cellar Cooling Unit

  • Dimensions: Evaporator: 20"L x 20.5ÓW x 15.5ÓH, Condenser: 16.08ÓL x 16.23ÓW x 12.61"H.
  • Up to 1000 cu. ft. when cellar is fully insulated and sealed with a proper vapor barrier. Heat load calculations should be performed prior to selecting a cooling unit..
  • WhisperKOOL always recommends consulting a cellar professional before designing a wine cellar..
  • A qualified HVAC-R technician is required for installation. Failure to have the system installed by a qualified technician will void the warranty. After your HVAC-R technician installs the unit, they will need to submit a Split System Checklist to WhisperKOOL to activate the warranty..
  • KDT Plus Digital Touch Display temperature control and bottle probe..
Check Stock

Pipe Clamp K-Type Thermocouple Probe, Measures temperature range -40 to 392 °F(-40 to 200 °C), Yellow, Hti-Xintai

  • This probe is able to maximum measure surfaces up to 200°C (390°F)..
  • Spring-loaded jaw for secure grip on pipes from 0.25" (6.35mm) to 1-3/8" (up to 3.5 cm) diameter..
  • The cable extends 38" (98cm) from the handle to the thermocouple connector with the meter..
  • Works with any Multimeter, Clamp Meter, and a Thermometer that accept a type K temperature probe..
  • Reliable measurements for HVAC and environmental testing..
Check Stock

WhisperKOOL Platinum Mini Split Wine Cellar Cooling Unit

  • Dimensions: 37"L x 15.75"W x 15.75"H (without duct plenums), 48"L x 15.75"W x 22.75"H (duct plenums on top of unit), 48"L x 22.75"W x 15.75"H (duct plenums on side of unit).
  • Up to 500 cu. ft. when cellar is fully insulated and sealed with a proper vapor barrier. Heat load calculations should be performed prior to selecting a cooling unit..
  • WhisperKOOL always recommends consulting a cellar professional before designing a wine cellar..
  • A qualified HVAC-R technician is required for installation. Failure to have the system installed by a qualified technician will void the warranty. After your HVAC-R technician installs the unit, they will need to submit a Split System Checklist to WhisperKOOL to activate the warranty..
  • KDT Plus Digital Touch Display temperature control and bottle probe..
Check Stock

Testo 550i Kit I App Operated Digital Manifold, 2 x 605i Thermohygrometer and 2 x 115i Pipe Clamp Thermometer for air Conditioning, Refrigeration Systems and Heat Pumps – with Bluetooth

  • Dependable: The testo 550i with its rugged housing (IP54) block was specifically created for harsh environments, offering the reliability needed by HVACR technicians.
  • User-friendly: With its compact design, 2-way valve block and automated probe connection, the HVAC meter provides convenient pressure measurement in difficult to access environments.
  • 605i Thermohygrometer: Equipped with a bendable probe head, the combometer achieves remote temperature and air humidity measurements in rooms, ducts, crawl spaces and registers.
  • 115i Thermometer: Thanks to a grip of up to 1.5”, the wireless pipe clamp thermometer provides quick and convenient temperature and flow and return temperature measurements of pipes.
  • Smart App: Take advantage of clearly visualized documentation from a smartphone or tablet. Remotely operate service and maintenance tasks and send results directly from the job site.
Check Stock

Infrared Penetration Thermometer for HVAC, Food Manufacturing, Laboratories Along with Calibration Certificate Model: Testo 826-T4 by INSTRUKART

  • Infrared Range: -45°F to 148°F / (-50°C to +300°C) | Accuracy: ±1.5°C | Measuring Rate: 0.5s | Resolution: 0.1°C..
  • Temperature: NTC Range: -42°F to 110°F / (-50°C to +230°C) | Accuracy: ±0.5°C | Measuring Rate: 1.25s | Resolution: 0.1°C..
  • Display Type: LCD | Display Size: One-Line | Lenth Probe Shaft: 55 mm | Standards: EN 13485| Battery Type: 2 AAA Batteries..
  • Supply Scope: 1 Unit of Infrared Penetration Thermometer,Top Safe Protective Case, Wall/Belt Holder, Protective Probe Cap,Frozen Produce Pre-Driller, Instruction Manual and Calibration Certificate..
  • Applications: HVAC, Food Manufacturing, Offices,Homes, Laboratories, Industrial and etc..
Check Stock

testo 115i I Pipe-clamp Thermometer for Heating and Cooling Systems I HVAC/R I with Bluetooth Support

  • Versatile: The testo 115i pipe-clamp thermometer is a precise measuring instrument for heating and cooling systems and is thus ideal for all HVAC/R contractors and technicians.
  • Easy to use: The Smart Probe measures temperature in pipes quickly and reliably and makes it easier than ever to monitor real-time trending and data logs on any mobile device.
  • State of the art: The probe grips pipes up to 1.5" and derives fast, accurate readings thanks to its NTC temperature sensor technology which is more accurate than thermocouples.
  • Time-saving: Its intuitive design with Bluetooth integration makes the 115i an efficient tool. Data can be displayed and saved in PDF and Excel files, resulting in less paperwork.
  • App for Android and iOS: The free testo Smart Probes App is a powerful tool that allows you to read and log measurements and creates custom reports which can be saved and shared.
Check Stock

Testo 557s Kit I App Operated Digital Manifold, 2 x 115i Pipe Clamp Thermometer, 1 x 552i Micron Gauge I for HVAC Systems – with Bluetooth

  • State-of-the-art: The testo 557s digital manifold replaces multiple HVAC tools and was developed to efficiently lighten your workload and deliver the most accurate results possible.
  • User-friendly: With its compact design, 4-way valve block and automated probe connection, the HVAC meter provides convenient pressure measurement in areas that are difficult to access.
  • 552i Micron Gauge: The testo 552i achieves precise deep vacuum measurements down to single digit resolutions and provides notifications when the evacuation target is met.
  • 115i Thermometer: Thanks to a grip of up to 1.5”, the wireless pipe clamp thermometer provides quick and convenient temperature and flow and return temperature measurements of pipes.
  • Smart App: Take advantage of clearly visualized documentation from a smartphone or tablet. Remotely operate service and maintenance tasks and send results directly from the job site.
Check Stock

HITNRUN Phase One

  • Efficient: The testo smart probe set offers precise measurements and calculations for heating and cooling systems, making it ideal for all HVAC/R contractors and technicians.
  • Complete Set: Includes two testo 115i pipe-clamp thermometers and two testo 549i high pressure gauges, as well as a protective hard-shell case with precise-fit compartments.
  • Testo 115i: With a grip of up to 1.5”, the wireless thermometer provides quick and reliable temperature and flow and return temperature measurements in pipes.
  • Testo 549i: The pressure meter enables accurate readings for high and low pressure. The 45-degree connector simplifies servicing and troubleshooting – without the need for hoses.
  • Smart App: The free testo Smart Probes App is a powerful tool that allows you to remotely read and log measurements and create custom reports which can be saved and shared.
Check Stock

Digital Temperature Controller STC-1000 Digital LED Display DC 24V 10A Celsius Heating Cooling Centigrade Thermostat Sensor 2 Relay Output with NTC 10K Thermistor Sensors Temperature Probe

  • STC-1000 Digital Thermostat temperature control range: -50-99°C, celsius display. Easy operation, to set start temperature, stop temperature,....
  • Dual heating and cooling function : Heating ( start temperature is less than stop temperature).
  • Cooling ( start temperature is above than stop....
  • The NTC probe is waterproof and allows to control the temperature even of fluids, allowing the controlled heated or cooling..
  • Wide Application : Suitable for all kinds of seafood machine ,HVAC compressors, freezer , fridge , air conditioner, fermentation chamber , chest....
  • Working Mode: Heater, when temperature is lower than the set temp, the controller will automatic turn on and turn off when higher than the set....
Check Stock

R134A HVAC Digital Manifold Gauge Set with 3 Hoses, R410A 90 Refrigerants Vacuum Pressure Temperature Leakage AC Refrigeration Tester for Testing Maintain Air-Conditioner, Refrigerator

  • State-of-the-art: The testo 557s digital manifold replaces multiple HVAC tools and was developed to efficiently lighten your workload and deliver the most accurate results possible.
  • User-friendly: With its compact design, 4-way valve block and automated probe connection, the HVAC meter provides convenient pressure measurement in areas that are difficult to access.
  • 552i Micron Gauge: The testo 552i achieves precise deep vacuum measurements down to single digit resolutions and provides notifications when the evacuation target is met.
  • 115i Thermometer: Thanks to a grip of up to 1.5”, the wireless pipe clamp thermometer provides quick and convenient temperature and flow and return temperature measurements of pipes.
  • Smart App: Take advantage of clearly visualized documentation from a smartphone or tablet. Remotely operate service and maintenance tasks and send results directly from the job site.
Check Stock

Fluke BC-7240 Battery Charger/Eliminator, For 75X Documenting Process Calibrator

  • Dual infrared and thermocouple thermometer for noncontact or contact temperature measurement in HVAC/R systems and manufacturing, electrical, and industrial environments.
  • Measures temperature from 40 to Plus-550 degrees C ( 40 to Plus-1022 degrees F) with an accuracy of plus or 1 degree C (plus or 2 degrees F) for the infrared sensor and an accuracy of plus or 2 degrees C (plus or 4 degrees F) or 1 percent of the reading, whichever is greater, for type K thermocouple input.
  • 12:1 infrared distance to spot ratio with laser sighting for pinpointing the measurement area.
  • Included type K thermocouple pipe probe wrapped in flexible hook and loop fastener with a 20 inch cable takes contact measurements from 0 to 100 degrees C (32 to 212 degrees F).
  • CE mark indicates compliance with applicable EU directives.
Check Stock

testo 549 I Digital Manifold for air Conditioning, Refrigeration Systems and Heat Pumps

  • Efficient: The testo 549 erases the need for analogue manifolds, offering data storage for up to 60 refrigerant profiles, precise measurements and automatic calculations.
  • Accurate: Thanks to the extremely sensitive sensors, the digital manifold determines high side and low side pressure as well as evaporation and saturation temperature.
  • Easy operation: Equipped with a large 2-line backlit display, 2-way valve block with three connections and a suspension hook, the HVAC/R instrument enables a convenient application.
  • Dependable: With its rugged design and sturdy, impact resistant housing, the pressure meter was particularly created for harsh environments and provides a lasting performance.
  • Versatile: In conjunction with an optional temperature probe, the digital gauge provides accurate real-time superheating and subcooling readings.
Check Stock