Top Hydraulic Clutch Bearing

Motul Multi DCTF - Dual Clutch Transmission Fluid (Pack of 6)

  • Dual clutch transmission oil 8100 is especially also suited for dual clutch transmissions equipped with a shared oil supply for clutch, synchronization, gear set and hydraulic control.
  • Specially developed for use in dual-clutch transmissions (DCT transmissions) in vehicles made by Audi and the VW Group.
  • Usage according to the prescribed specific cations from the unit or vehicle manufacturer.
Check Stock

Liqui Moly 20116 Dual Clutch Gear Oil (8100), 5 l, 1 Pack

  • Dual clutch transmission oil 8100 is especially also suited for dual clutch transmissions equipped with a shared oil supply for clutch, synchronization, gear set and hydraulic control.
  • Specially developed for use in dual-clutch transmissions (DCT transmissions) in vehicles made by Audi and the VW Group.
  • Usage according to the prescribed specific cations from the unit or vehicle manufacturer.
Check Stock

9TRADING 1100 lbs Auto Transmission Jack Adapter Capacity Transform Automotive Floor Jack

  • OTC's rugged, stable, 2,000 lb. capacity transmission jack is ideal for handling heavy transmissions like the Eaton Fuller Roadranger transmissions used in most Class 7 & 8 trucks (adapter included).
  • Low profile design gets under the lowest clearance trucks making it ideal for clutch repair work.
  • Built in safety overload feature prevents using the jack beyond its rated capacity.
  • safety bypass protects the hydraulic cylinder from damage.
  • Features a pump handle that conveniently rotates a full 360 degrees for use in any position and 3.5 inch, ball bearing swivel casters for easy jack positioning.
  • Min. height - 6-7/8 in., max. height - 35-1/4 in., max. forward tilt - 24 deg., max. backward tilt - 18 deg., max. side tilt (either side) - 11 deg., overall length - 43-1/2 in., overall width - 26 in..
Check Stock

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

  • ...including GM, Ford, Chrysler, imports, and other makes and models.
  • Check vehicle owner’s manual for a list of compatible compressors.
  • EASY TO USE: Keep all threads clean and well-oiled.
  • Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
  • Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
  • Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
  • BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
  • Resists rust and corrosion with proper care and lubrication.
  • 2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
  • EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (26.7cm x 21cm x 5.7cm) plastic blow-molded carrying case with handle for easy transport, safe storage, and quick organization.
  • CONTENTS: Complete with puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
  • includes (1) 3-eye round clutch plate sander arbor, (3) 1/4-inch – 20 Hex screws, (2) 3/8-inch – 16 Hex....
Check Stock

Hydraulic Brake Clutch Handlebar Control Kit Switch Housings for 14-Up Harley-Davidson Touring FLHT FLHX Road Glide 47-701 (Chrome)

  • Brake master cylinder with lever. Hydraulic clutch master cylinder with lever. Switch housings..
  • Fits for Harley-Davidson 2014-2016 FLHT/FLHX and Road Glide models with stock hydraulic clutch..
  • 11/16" (15mm) bore brake master cylinder..
  • Better look and finish than any other product..
  • Kits come complete with all hardware for easy installation..
Check Stock

OTC 5035 Truck Clutch AdjusTment Gauge Set

  • Enables technicians to check the adjustment of pull-type heavy-duty clutches, ensuring their correct operation.
  • One gauge checks the amount of free play between the yoke and the bearing's wear pad.
  • Other gauge lets you determine the amount of travel between the release bearing and transmission bearing cap.
  • Includes clutch pedal free play gauge and release bearing travel gauge.
Check Stock

Motorcycle Handguards Black Coffin Cut Stainless Steel Hand Guards Compatible With Harley Touring Street Glide Road King Electra Glide Bagger 2014-2020 with Hydraulic Clutch (Large)

  • The large hand guards are specially designed for motorbikes with Hydraulic front brakes. Notice: the length of both mounting tabs is the Same. If your motorcycle with a Cable Clutch, please pick up our cable clutch style ASIN: B08NV4N2Z1..
  • FITMENT: The motorcycle hand guards kit is compatible with Harley 2014-2020 Touring baggers and bikes with the larger switch housings and Hydraulic Clutch..
  • PREMIUM MATERIAL: The large hand guards is made of 16 gauge stainless steel with 12 gauge reinforced mounting tabs for powerful and durable..
  • EASY INSTALLATION: It doesn't need any extra mounting hardware, just remove to the control mount of the mirrors. Easy to install..
  • SAFE RIDING: The hand guards can protect your hands from brush, rocks, mud and cold wind and it can keep the hands warm and dry while riding..
Check Stock

Recajia Universal 6 Hole Flywheel Rotor Magneto Puller Tool with 5mm Diameter and 6mm Bolts

  • [No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
  • [3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
  • [Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
  • [Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
  • railway vehicle, factory machinery and mining equipment maintenance, etc..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..
Check Stock

Clutch Slave Cylinder Hidraulic Clutch (NACS0760) | Compatible with Pt Cruiser Limited Touring Base Dream Wagon 2001-2005 2.4L L4 | Gas Dohc Naturally Aspirated (Non Turbo) | Hydraulic Systems

  • In order to reduce warranty and downtime in difficult-to-bleed applications, Southeast Clutch offers pre-filled clutch hydraulic systems..
  • Fully bled system includes a master cylinder and slave cylinder, connected by the hydraulic line. No additional components are required..
  • Designed for applications that typically include a pedal pulsation damper, but usually do not include a conventional bleed screw. The design of these components makes conventional bleeding difficult and time consuming..
  • Late model hydraulic systems require a variety of complex bleed procedures. Obtaining this information is challenging, and bleeding these systems is even more difficult and time consuming. The pre-filled system reduces shop time and eliminates warranty..
  • If the built-in pedal pulsation damper becomes contaminated, the system becomes nearly impossible to bleed. In addition, it is especially difficult to remove air from the damper. The pre-filled system eliminates these difficulties..
Check Stock

Bonvoisin 15T Hydraulic Gear Puller Set Wheel Bearing Puller Kit 2 or 3 Jaws Pulling Separator for Wheel Hubs Rotors Car Axles Pulleys Brake Drums

  • [No Oil Leakage] - The hydraulic puller is forged with high-quality steel and cast in one piece. There is NO need for sealing rings and NO oil leakage. And the hydraulic cylinder is thickened with a strong pressure resistance..
  • [3 or 2 Jaws Interchange] - 3 jaws / 2 jaws can be easily interchanged can be easily interchanged, and can also be used Horizontally or vertically, without site restrictions. It is flexible to operate and easy to replace..
  • [Complete Accessories] - This 3 in 1 bearing puller set integrates pump, tubing, and drawing machine, which includes: 1 x hydraulic cylinder, 1 x handle, 3 x jaws, 6 x pulling tabs, 6 x screws, 1 x spring thimble, 1 x pull ring, 1x portable thickened plastic box..
  • [Wide Applications] - The bearing separator is widely used in various places. Such as truck hub, brake drums, sprockets, rotors, car axles, wheel bearing, shaft and pulley disassembly.
  • railway vehicle, factory machinery and mining equipment maintenance, etc..
  • [One-year Warranty] - Within one year of purchase, if something goes wrong with the hydraulic puller, you can replace it for free..
Check Stock

SP1 Drive Clutch Bearing - SU-03102

  • Manufactured to AFBMA standards using high quality materials.
  • Precision provides clutch release bearings for all popular hydraulic and non-hydraulic applications.
  • Applications include automotive, light truck and medium truck.
  • Components are sample inspected at each process to insure all dimensional and visual specifications are met.
  • 100% final inspection prior to packaging assuring the highest level of quality.
Check Stock

Motive Products - 0109 Power Bleeder for European (Black Label)

  • Heavy duty 2 quart pressure tank holds enough fluid to do complete flush and bleed.
  • Built-in hand pump (no other pressure source is needed).
  • Precision pressure gauge ensures safe and effective operation.
  • Tested for compatibility with both standard and synthetic hydraulic fluids.
  • All bleeders come with everything needed to bleed hydraulic brake or clutch system.
Check Stock