Top Hydraulic Hose Clamp Kit

Akozon Hydraulic Pressure Gauge Hydraulic Hose Test Point Coupling M16 2-BSP1 / 4 0〜600BAR / 0〜8500PSI with 1.56m / 61.42inch Hose Kit Hydraulic Pressure Test Kits

  • 【Test the Pressure】This hose gauge kit is designed for testing pressure in a hydraulic system.Test the pressure of each point of the hydraulic system and the pipeline as a conductive fluid medium. The pressure measuring hose assembly is used in conjunction with the pressure measuring connector..
  • 【High Quality】This hydraulic pressure gauge kit has one strong and light aluminum case.Excellent material selection, the shell is made of 304 stainless steel, stainless steel material has the characteristics of wear resistance, , and good contact performance,well protect the inner accessories..
  • 【Chemical stability】This hydraulic hose has the characteristic of heat resistance, chemical resistance, acid resistance and solvents.
  • 【Strong environmental adaptability】 ,resistance, adaptation to climate change, no absorption..
  • 【High Performance】The pressure measuring hose assembly has the advantages of advanced structure, reliable sealing, secure seizure, small size, light weight and easy use. Because the inner wall is smooth, the flow resistance is very small..
Check Stock

ACforCars Universal A/C Kit System (Without Compressor) Condenser 10x18, Cooling Fan 10', Underdash Evaporator Console Black, Drier, Fitting, Hose Bundle & O-Rings

  • UNDER DASH EVAPORATOR UNIT 13,000 BTU 4 Louver all BLACK Console, 24 Pass, Double Shaft Blower Motor 12V, Include Mounting brackets, drain hose and T, 15.7inL x 11.8inW x 5.7inH.
  • CONDENSER 10in X 18in 18mm depth COOLING FAN 10in 80W 12V RECEIVER DRIER Steel Black.
  • CLAMP for Drier SWITCH ORING Kit (5) #06 5/16 (5) #08 13/32 (5) #10 1/2.
  • HOSE Kit (6 FT) #6 5/16 (4 FT) #8 13/32 (5 FT) #10 1/2.
  • FITTING Kit #6 #8 #10 (Straight) (45 degrees) (90 degrees) (90 degrees w Service Port) & Hose Clamp.
  • Included components: UNDER DASH EVAPORATOR UNIT, CONDENSER, COOLING FAN, RECEIBER DRIER, CLAMP, PRESSURE SWITCH, O-RING Kit, HOSE Kit, FITTING Kit.
Check Stock

Hoshizaki 427443-05 Hose Clamp

  • 【NO EDGES OF SHARPNESS】-- These worm gear hose clamps have no edges of sharpness to cut into the hose, which will not hurt your hands or tubes.
  • 【PREVENT FLUID LEAKAGE】-- Item Type: Hose clamp. Spring hose clamp is perfect for attach hoses to fittings to prevent fluid from leakage.
  • 【VERY TIGHT HOSE CLAMPS】-- Carbon steel color zinc plating. These clamps are very tight, so you have no worry about fixing of the threads comes off.
  • 【HIGH QUALITY CARBON STEEL】-- Type: Elastic hose clamp. Hose clamps are made of high quality carbon steel material, which is durable for a long service life.
  • 【EASILY ADJUSTED BY SCREWDRIVER】-- Fuel hose clamp kit can be easily adjusted by a screwdriver to fit your pipes or tubes, hose clip clamps are great for indoor or outdoor operation.
Check Stock

VEVOR Hydraulic Outboard Steering Kit 300HP, Hydraulic Steering Kit Helm Pump,Hydraulic Boat Steering Kit with 22 Feet Hydraulic Steering Hose for Boat Steering System

  • Hydraulic Outboard Boat Steering Kit: The hydraulic outboard boat steering kit includes a steering cylinder, a steering pump, a 13.5" steering wheel, and a 22ft hose kit. It is a perfect replacement for your aging or broken equipment and becomes a good companion for your sailing trips..
  • Aluminum Alloy Steering Cylinder: Output force: 468 KGF. Steering cylinders come with an upgraded sealing system for maximum protection from saltwater and compression set. Positionable stainless steel O-ring (ORB) fittings for easy hose routing. And the robust barrel is made of aluminum alloy, which is wear-resistant, corrosion-resistant, and does not fear seawater erosion..
  • Max. 300HP Helm Pump: Max. Working pressure: 6.9 Mpa/1000 psi. The hydraulic pump has a replaceable shaft seal, built-in locking valve, relief valve, ORB fittings, and airbag. Allow you to use the equipment securely and conveniently..
  • Nylon Hose & Steering Wheel: The 13.5" steering wheel is made of aluminum alloy and high-quality plastic. The 22" nylon hose with quick-fit 1/4 fitting is easy to install. And the hose can be cut to the desired length..
  • Great Partner for Your Boat: Works for boats up to 60 MPH with single outboards up to 300 HP. Outboard-powered boats like the center console, offsho....
Check Stock

X AUTOHAUX 4pcs AN10 Hex Car Hose Finisher Flexible Rubber Pipe Clamp with Screw Band Adapter Fitting for Oil Fuel Water Tube Purple

  • HIGH QUALITY: Our auto Hose Clamp Plier is made by heavy duty carbon steel with firm grip rubber handles for fuel & coolant pipe spring line clip..
  • CAPACITY: This flexible hose clamping tool kit is with a max opening of 1-3/4 inch, which can be used on most ring-type or flat-band hose clamps for easy removal and installation..
  • LOCKING FEATURE: Locking ratchet that holds the clamp open for easy/quick installation and removal. Tips swivel to allow access in confined areas and can be used at any angle. Finger tip "position lock" makes it easy to replace the lower radiator hose..
  • WIDE APPLICATION: The long reach of these plyers allows you to work in confined and tight spaces. Our automobile hose cable clamp remover and release tools can get into those narrow spaces and get the job done with ease!.
  • EFFICIENT: Non-slip handle assure steady grip and decrease hand fatigue during use. The ratcheting action is smooth and releases when you want it to. Lock it in place and it just stays allowing you to move the hose clamp wherever you want. It is great for a backyard mechanic..
Check Stock

Hose Clamps, Stainless Steel Hose Clamp for 1/2 Inch to 1 Inch Hose Pipe Adjustable Worm Gear Hose Clamps Assortment for Automotive Plumbing, Fuel Line, Mechanical Application, 10 Pcs Hose Clamp Set

  • Sturdy & Durable --- Stainless Steel Hose Clamps made of 0.5mm thickness 304 stainless steel (including band, housing and screw). Hose clamp set have the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Pipe Clamp are reliable strong reusable and durable for long-term use..
  • Adjustable Hose Clamps --- The Worm drive Hose clamps are high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/2 inch to 1 inch (14mm-27mm), great for hose or pipes within this range, perfect as 1/2 inch hose clamps, 3/4 inch hose clamps, 7/8 inch hose clamps, 1 inch hose clamps etc...
  • Easy To Install --- Hose clamp large has pre-assemble hose clamp fasteners, with through hole process design and slotted holes, steel belt through hole, tight locking and strong torsion force. Hose clips installation just need to use the hose clamp driver to loosen the screw(6mm Flat Head) of hose clamp, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are perfectly suitable for home, industrial, gardening, mechanical, electronic, boat, marine and more. Hose clamps metal are perfect for automotive, seal hoses, water pipe....
Check Stock

Superior Pump 99621 Lay-Flat Discharge Hose Kit, 1-1/2-Inch by 25-foot

  • 25-Foot discharge kit for use with most sump and utility pumps.
  • 1-1/2-Inch by 25-foot reinforced PVC lay-flat hose.
  • Hose kit also includes: (1) 1-1/4" FTP x 1-1/4" FTP or 1-1/2" MPT coupling, 1-1/4" MPT x 1-1/2" BARB adapter and one stainless steel hose clamp.
  • Includes all components: Hose, Hose Clamp, Coupling, Barb Adapter - for quick, easy installation.
Check Stock

Hydraulic A/C Hose Crimper Hydraulic A/C Crimping Tool Hydra-crimp for Barbed and Beaded Hose Fittings

  • Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
  • The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
  • The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
Check Stock

Swpeet 121Pcs 7-22mm Spring Band Hose Clamps with Swivel Flat Band Fuel Hose Clamp Plier Assortment Kit Silicone Vacuum Hose Action Pipe Clamp Low Pressure Air Clip Clamp for Hose Clamps

  • What You Get --------- In this kit, You will get 120Pcs 12 Sizes Assorted Spring Band Hose Clamps, Including 7mm.
  • 22mm. Have 12 Sizes and each sizes 10Pcs. Including 1Pcs Swivel Flat Band Hose Clamp Plier. These Tool kit can meet all your daily needs..
  • Flat Hose Clamp Pliers with O Shape ------ Our hose clamp pliers with a flat feature that can get into those tight spaces and get the job done with ease! Locking ratchet that holds the clamp open for easy installation and removal. Tips swivel to allow access in confined areas and can be used at any angle..
  • High Quality ------ Spring Clips Made of high quality 65Mn Spring Steel, anti-corrosion and durable for long time use. Great product for your fuel line repairs. Great price and quality. These pliers are constructed from high carbon steel with a Manganese Phosphate coating to prevent rust and corrosion. Highly recommend..
  • Great Value for Kit, Get The Right Tool, Much Easier ------------ Perfect for lower or medium pressure. Get the right tool to install or remove. Work best on tube fittings with the small bead rolled on the end. Better for small tubing than worm screw type unless high pressure. Get the chart to convert the numerical mm's size to f....
Check Stock

Adjustable House Clamp 304 Stainless Steel, 14.7 FT Duct Metal Strapping with Holes + 10 Stronger Fasteners, Large Worm Gear Hose Clamps Band Clamps for Pipe Plumbing Mechanical Applications

  • [Any size hose clamps Assortment Kit] Do you sometimes need an odd-sized hose clamp, especially one that would be bigger than you would normally use? If so, this is the hose clamps assortment kit for you, with this kit you custom-cut your own clamps when and as you need them. No more ill-assorted collections of mostly wrong-size clamps that are usually too big or too small for your needs with no bulky, wasted material..
  • [Package Include] The hose clamp kit includes 0.5’’ X 14.76 FT stainless steel strapping bands, and 10 pcs fasteners in total. They can be adjustable for most clamp and securing situations. Moreover, very strong good quality 304 stainless steel will not rusty for a long time..
  • [How to Use] Before using, prepare plier for cut the hose clamps, and a small flat bladed screwdriver. Then, test feed the direction of the band before crimping the screw end on by feeding in, screwing, making sure it is not locking up after few turns. The band will work smoothly and is tightened by a screw with threads of the screw engaging the slots in the band, if put together proper way. Once you get screw clamp part mounted on the band, just measure how long you need i....
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 1/2 Inch to 2 1/2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch to 1/2 inch, 3/8 inch to 5/8 inch, 1 inch to 2 inch, 1-1/2inch to 2-1/2 inch, the various size stainless steel clamps help you easy to clamp different size hose or pipe..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are w....
Check Stock

Hose Clamp, Stainless Steel Hose Clamps for 1 Inch to 2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line, Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch, 1/2 inch, 3/8 inch, 5/8 inch, 1 inch, 2 inch, 1-3/5inch, 2-1/2 inch. Stainless steel clamps with various size can meet your different clamping requirements..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are widely applic....
Check Stock