Top Hydraulic Hose Crimping Machine

Burndy Y1MRTC Hytool Ratchet Crimper, Copper Hydent Terminals, Splices, and Thin-Wall C-Taps, 0.73' Width, 9-7/8' Length

  • 【Hydraulic Power Driven System 】Different with similar hand tool that relies on leverage and hand power, our hydraulic copper tube fittings crimping tool is designed with hydraulic cylinder which is labor-saving. One person is totally enough to finish leak-free connections..
  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair..
  • 【360° Rotating Head】The rotating head makes the copper plumbing easier in some locations especially for Tee fittings..
Check Stock

Eastman Washing Machine Drain Hose, 3/4 Inch FHT Connection, 6 Foot Black Rubber, 60325N

  • WASHING MACHINE HOSE: Washing machine drain hose coupling features an open end design which allows for use of the hose in drainage applications or as a fill hose.
  • compatible with most brands of washing machines.
  • FEATURES: The washing machine drainage hose is ideal for both hot and cold water supply lines.
  • DURABLE: Flexible dishwasher drain hose coupler is composed of strong and sturdy black EPDM rubber for long-lasting reliability, provides protection against kinking and crimping, and is corrosion resistant.
  • TECHNICAL: The dishwasher drain hose extension features a 3/4 inch female hose thread connection which can connect to a wide range of valves and hose bibs.
  • EASY INSTALLATION: Dishwasher hose fitting includes all the necessary hardware for installation, and lays flat to provide a closer fit with the washing machine.
Check Stock

Tinsay Hydraulic Hose Crimper Crimping Tool Kit Conditioner Automotive Repair 71500 Hydraulic Hydra-Krimp A/C Air Conditioner Hose Fitting Crimper Machine

  • Lightweight hand-held hydraulic press is very portable and ideal for shop and field applications. Comes with a complete set of dies covering hose....
  • Dies snap quickly into the press fixture requiring no pins or screws..
  • Warning: do not move the piston without pressing a hose and joint. This may damage the tool and also be careful not to pinch any of the hands near the....
  • Perfect for crimping barbed and beaded fittings..
Check Stock

AMZCNC 10 Tons Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool With 9 Pairs of Dies

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 5.6Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working.
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock

REDLOONG hydraulic hose crimper ac crimping tool machine with dies Handheld Hydraulic Hose Crimping Tool Hydra-Krimp 71500 Manual A/C Hose Crimper Kit Air Conditioning Repaire (integrated-blue)

  • Durable Crimping Tool: Our crimper is made of aluminum alloy material, ensuring its durability. Stamper hardness can reach up to 53 HRC to bear a large force. And it is equipped with 4 dies, size: 6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
  • Factory direct sales, after - sale maintenance accessories update guaranteed.
  • The kit is applicable for beadlocking fitting and barrier A/C hose.
  • Crimping pipes and fittings in an easy and labor-saving way.
  • The lightweight hand-held hydraulic press is very portable..
Check Stock

AMZCNC 71500 Hydraulic A/C Hose Crimper Hydra-Krimp Manual A/C Hose Crimper Kit Air Conditioning Repaire Handheld Hydraulic Hose Crimping Tool

  • 【Handheld Sized】The lightweight hand-held hydraulic press is very portable..
  • 【Easy to use】Crimping pipes and fittings in an easy and labor-saving way..
  • 【Function】The kit is applicable for beadlocking fitting and barrier A/C hose..
  • 【Economic performance】The dies snap quickly into the press fixture requiring no pins or screws..
  • 【Overall Performance】The Kit comes with a complete set of dies covering hose sizes: 6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.Always wear safety....
Check Stock

10 Ton Custom Hydraulic Hand Crimper Tool for Stainless Steel Cable Railing Fittings for 1/8 to 3/16 Cable -Wire Swaging Tool Kit with Stainless Steel Cable Cutter

  • 【DURABILITY】Made of durable materials, high strength and good toughness. And dies are made of hardened steel with chrome finish. It also provides....
  • 【SPECIFICATION】Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power: 10 tons. Crimping Stroke : 12mm. The hydraulic....
  • 【HUMANIZED DESIGN】With this professional crimper, you can crimp wires and butt connectors easily. It is much easier than using a pair of hand....
  • 【Size】Hydraulic Hand Crimper Tool: Length:approx.310mm, Weight:approx.N.W1.75kg G.W3kg. Cable Cutter: 8.1 x 2.8 x 1.4 inches, Weight:11.2 ounces..
  • 【Package List】Includes Hydraulic Hand Crimper with 9 sets of the crimping dies, seal rings, strong protective carrying case, cable cutter and pair....
Check Stock

BLIKA 10 Ton Hydraulic Crimping Tool and Cable Cutter, Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool with 9 Dies, Wire Swaging Tool for 1/8' to 3/16' Cable Railing Hardware

  • Compatibility : Crimps 12 AWG to 2/0 AWG size copper and aluminum wires. Maximum crimping power: 10 tons. Crimping Stroke : 12mm. The hydraulic crimper’s head can be rotated 180° freely to benefit narrow space working, a good choice for battery and welding cables, power wires, electrical cables, etc..
  • Material: Made of durable materials with high strength and good toughness. Black Oxide Crimp Head and Dies won’t chip or flake. Dies are made of hardened steel with chrome finish. Vinyl-dipped grip for comfort and easy control..
  • Black Crimping Dies: Comes with crimping dies for 12 AWG, 10 AWG, 9 AWG, 8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG and 2/0 AWG cables and creates strong, hexagonal crimps for a clean, efficient look for your projects..
  • Easy to use: On/Off control for fast operation, easy crimping and arm retraction when crimping aluminum or copper wire. The C-style head makes side entry easier to change the dies..
  • Package List: 1X Hydraulic Crimper Tool + 9 pairs of crimping dies + 1X Cable Cutter + Seal Rings + 1X Work Gloves + 1X Carrying Case. If you’re not satisfied with this item at any time within one month of purchase, we’ll provide a refund or replacement..
Check Stock

Hydraulic Copper Pipe Tube Fittings Crimping Tool with 1/2,3/4 and 1-inch Dies for ProPress Copper Pipe Fitting,Can t crimp Tee Fitting

  • Different with similar hand tool that relies on leverage and hand power, our hydraulic crimping pliers is designed with hydraulic cylinder which is....
  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of....
  • Compatible with Viega Copper,Pro-Press,Elkhart,Conex Pipe Fittings.
Check Stock

10 Tons Hydraulic Wire Battery Cable Lug Terminal Crimper Crimping Tool With 9 Pairs of Dies

  • Professional tool to attach lugs to the ends of heavy duty power cables and wires. The C-style head makes side entry easy to access and operate. Crimps 12 AWG to 2/0 AWG size copper and aluminum wires..
  • Crimping range is from 4 to 70 mm2. Maximum crimping power 10 tons. Vinyl-dipped grip for comfort and easy control. A carrying case is included to sort of all necessary parts.
  • Easy operation and easy to change the dies. On-Off control for speedy operations.
  • 9 pairs of hexagon dies: a Hydraulic Crimping Tool Instruction..
  • 100% money back guarantee. All items have been double inspected before on market..
Check Stock

Eastman Washing Machine Connector, 3/4 Inch FHT Connection, 10 ft Braided Stainless Steel Washing Machine Hoses, 48640

  • WASHING MACHINE CONNECTOR: Washing machine hose adapter is designed to resist full flow and high pressure and provide a leak-free connection for your washing machine.
  • features a working temperature of 15 degrees F to 158 degrees F.
  • WHAT IS INCLUDED: (1) washing machine hoses 10 feet in length.
  • washing machine hose fittings are equipped with a 3/4 inch Female Hose Thread (FHT) connection at each end.
  • CONSTRUCTION: Washing machine hose coupler features a PVC core, multi-filament braided nylon reinforcement, a clear vinyl outer shell, and a grade 304 stainless steel braided exterior that is designed to prevent kinking and crimping.
  • CERTIFIED: Washing machine hose hook up is intended for residential use only, CSA certified, and UPC approved.
  • EASY INSTALLATION: This flexible supply line features nickel-plated brass nuts with stainless steel ferrules for easy installation.
Check Stock

AMZCNC Hydraulic Cable Lug Crimper 10 US TON 12 AWG to 00 (2/0) Electrical Terminal Cable Wire Tool Kit with 9 Die (Crimping Tool)

  • Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 0.56Inch.
  • Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope.
  • 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working.
  • 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip.
  • 【Easy operation】The mold can be easily replaced by one-way fixed latch.
Check Stock