Top Hydraulic Hose Sealing Products

VEVOR Hydraulic Hose 3/8 inch x 100 ft, Coiled Hydraulic Hose 4800 PSI, Rubber Hydraulic Hose with 2 High-Tensile Steel Wire Braid, Bulk Hydraulic Hose -20°C to 140°C, Hydraulic Oil Flexible Hose

  • 【DURABLE MATERIAL】- The innermost tube and the outer protective cover are constructed of synthetic rubber. The outermost is cover by fabric. The inner material is two high-tensile steel wire braid reinforcement layers..
  • 【100 FT HYDRAULIC HOSE】- The coiled hydraulic hose is 100 ft long in total, the inner diameter is 3/8 inch, and the outer diameter 3/4 inch. With a 4800 PSI working pressure, the hydraulic line is explosion-proof..
  • 【HIGH STRENGTH】- The bulk hydraulic oil hose is constructed of synthetic rubber to resist oil and chemicals, while the outer cover also protects the hose from weather, ozone, abrasion, and corrosion..
  • 【INCREDIBLE FLEXIBILITY】- Wire hose layers provide flexibility and versatility to allow you to install your rubber hose and hydraulic fittings in tight quarters for less vulnerability. It can work between -40 °C and 121 °C..
  • 【VARIOUS USES】- The hose is suitable to carry petroleum, mineral oils, emulsion, hydrocarbons, and water-based hydraulic fluids. It is ideal for construction, agriculture, and other machinery that uses a hydraulic system..
Check Stock

NEWTRY 20T Low Profile Hydraulic Jack Porta Power Kit + CP-180 Manual Hydraulic Hand Pump Multi Section Jack, 1.18” Stroke Industrial Mini Hydraulic Cylinder

  • ▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable..
  • ▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2.24inches high, but the stroke is up to 1.18 inches. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use..
  • ▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
  • ▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has m....
Check Stock

48x Cyclone Natural Pre Rolled Grape Toasted Hemp Cone 24x 2 Packs Non Tobacco

  • SPECIFICATION - Inside Diameter – 3/4” Diameter | Length - 165 Feet Long | Color - Black | Pitch - 20mm/0.79” | Material - HDPE (High-Density....
  • HEAVY DUTY HYDRAULIC HOSE SPIRAL WRAP - Kable Kontrol Cyclone HDPE hydraulic hose wrap is ideal for Heavy Duty bundling and hydraulic hose protection,....
  • MSHA CERTIFIED & UV RESISTANT - Cyclone heavy duty spiral hose wrap is MSHA certified and UV resistant. Cyclone hydraulic hose spiral wrap protects....
  • UNIQUE FEATURES - Kable Kontrol Cyclone Heavy duty hose protector tubing have rounded edges for reduced risk of exposed sharp edges. This Heavy duty....
  • COST EFFECTIVE & QUICK METHOD - Cyclone Spiral tubing serves as a cost-effective and quick method for minimizing heavy production losses. Developed to....
Check Stock

Dialed: The secret math of a perfect mountain bike setup

  • [Great Valve Package] In this package, you will get 4pcs brake lever covers and 4pcs compression nuts, 6pcs protective sleeves, 4pcs oliver and 4pcs inserts, 1 roll 2500mm bicycle hydraulic disc brake hose, 1pc bicycle hydraulic hose fitting insert tool and 1pc hydraulic hose cutter, total 25pcs. Complete kit can fully meet your needs, which is ideal for Shimano BH59 System, you don’t need to find and buy other accessories, saving your time and money..
  • [Reliable Material] Brake hose is made of high-quality material and nylon coating, which is durable and stable. 2500mm length pipes can be cut according to your needs. Precision made with fine workmanship, high temperature and low temperature resistance, high blasting coefficient and enough safe. Needle driver insertion tool is made of aluminum alloy CNC process, it feels good and durable..
  • [Hose Fitting Insert Tool] It is easy to use, super utility needle driver insertion tool. Attached hydraulic hose cutter, sharp and achieve precise and smooth cutting, clean and no burrs. Quick change adapter design, it can match with all needle driver olive and barb on the market, making maintenance easier..
  • [How to Use] You can install hose fitting cleanly and gently. First, put the olive into the oil pipe, seco....
Check Stock

Bottle Jack Ram 10 Ton Capacity Porta Power Hydraulic Pump Auto Body Frame Repair Tool Kit Power Set Auto Tool for Automotive Truck Farm and Heavy Equipment/Construction Skroutz

  • ▷[IMPORTANT PARTS]---The hydraulic pump consists of ZG 3/8 connector, non-slip handle, hydraulic pump body, release valve and hose. Our hydraulic cylinder jack not only has a smooth surface, but also has good sealing and no oil leakage. At the same time, the non-slip handle makes the use more comfortable..
  • ▷[MULTI-SECTION DESIGN, SUITABLE FOR NARROW SPACE]---This low profile hydraulic jack is only 2 inches high, but the stroke is up to 1 inch. Compared with ordinary jacks, multi-section jacks can be used in a narrower and lower space, effectively increasing the stroke of the jack within the height of the body, so that the weight can be raised higher and more convenient to use..
  • ▷[SMOOTH LACQUER SURFACE & ANTI-DUST COVER]---The surface of hydraulic ram cylinder is painted with lacquer, which is not easy to rust. Made of heavy-duty metal construction, our hydraulic cylinder jack is durable and designed for long-lasting use. Anti-dust ring can reduce pollution, thereby prolonging the service life of hydraulic cylinder..
  • ▷[COMPOSITE STRUCTURE & MULTI-FUNCTION]---Equipped with various accessories, it has multiple functions such as lifting, jacking, shoveling and splitting, and can be quickly installed by using quick connectors. 10T and 20T jacks are ....
Check Stock

VEVOR Hydraulic Steering Cylinder 300HP, Hydraulic Steering, Front Mount, Hydraulic Outboard Steering Cylinder for Marine Boat Steering System

  • Max Working Pressure: 10.3Mpa: The hydraulic steering cylinder for outboard has a working pressure of up to 10.3Mpa, about 1500psi..
  • Advanced Crush Resistance: State of the sealing system offers superior resistance to repeated compression set and is designed to better withstand the harsh environment..
  • Built-In Two-Way Lock: The hydraulic steering cylinder is equipped with a built-in two-way locking valve which eliminates rebound torque during torsion..
  • Easy to Install: This steering cylinder includes positionable stainless steel O-Ring (ORB) fittings for easy hose routing. We made this design also for easy installation and replacement..
  • Wide Application: Suitable for ships under 300 horsepower, outboard-powered boats like the center console, offshore fishing, bass boats, flats boats, and many more..
Check Stock

gazechimp Stainless Steel Outboard Steering Link Lever Tie Rod End Set for Marine Boat

  • Built and certified to meet safety & quality requirements established by the American Boat & Yacht Council (ABYC) and International Standards Organization (ISO).
  • Hydraulic Steering Kit without hoses (ordered separately HO51xx where xx equals hose length in feet) for non-aggressively driven single outboard powered boats that do not exceed 75mph.
  • Updated system includes O-ring boss rotational fittings for easy hose routing and new end gland sealing system for maximum protection from saltwater and compression set.
  • Five turns lock-to-lock with 1.7 cu.in. helm (included) for maximum steering comfort.
  • Robust Barrel Design and NEW Graphics compliment new boats and motor packages.
  • Not recommended for boats that exceed 75mph or run surface piercing props or the power exceeds the maximum Coast Guard rating for the vessel.
Check Stock

Hydraulic AC Hose Crimper 71500 Manual A/C Hose Crimper Kit Air Conditioning Repair Handheld Hydraulic Hose Crimping Tool, SK8057

  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes: #6(5/16"), #8(13/32)", #10(1/2"), #12(5/8") and reduced barrier hose sizes: #6(5/16"), #8(13/32)", #10(1/2"), #12(5/8") . Note: #8SRB and #6 is the same dies, with purple color..
  • This hydraulic crimping tool is made of aluminum alloy material, ensuring the durability. Stamper hardness can reach up to 53 HRC, making the crimping effect better, and the hand‑held detachable hydraulic design makes the manual air conditioning hose compressor easier to use..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice. The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws..
  • Hose Crimper Kit comes with a whole set of accessories and one storage box, which makes it easier for you using. Easy to store, easy to organize, avoid missing..
  • 7*24 hours online service. If you encounter any questions during the shopping process, you are welcome to contact us at any time..
Check Stock

20FT 6AN 3/8\ Nylon Stainless Steel Braided CPE Oil Gas CPE Fuel Line Hose,black

  • ▶Nylon and stainless steel braided CPE fuel hose can be used with transmission fluid, coolant, oil, pump gas, race gas,vacuum, hydraulic fluid, diesel and fuel. Commonly used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, carburetor fuel hose, turbo cooler line, oil feed line, swap fuel line..
  • ▶Black Braided Steel Fuel Hose Maximum Working Pressure (psi): 500 psi. Bursting Pressure(psi): 2000psi. Working Temperature Range: -40℉ to 150℉. Please make sure the pressure and temperature range is suitable for your application before purchase..
  • ▶Length: 20 Feet. Inner Diameter: 5/16" (8.71mm). Outside Diameter: 0.56inch (14.22mm). Please measure before purchase!.
  • ▶Nylon fiber and stainless steel braid cover for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..
  • ▶Professional installation is highly recommended. The AN6 nylon braided fuel hose is designed for use with 6AN swivel style hose end fitting. All of our products are subject to strict quality control. If there are quality problems or you are not satisfied with the products, please contact us. We offer you the best solution..
Check Stock

Toledo Hydraulic Hose Cut Off Saw Model 14, 4.5 HP, 115V, 3500 RPM cuts up to 2\ - 6 wire

  • Toledo Hydraulic is proud to bring you a medium to heavy duty hose cut off saw made in the USA..
  • The HC14 cut off saw is designed for quick, easy cutting of industrial wire reinforced hose..
  • Comes equipped with a 14" Scalloped blade, 4.5 HP Motor that runs at 3500 RPM..
  • Handles rubber covered wire reinforced hose ranging in size up to 2" ID hydraulic hose..
  • Handles 4" inner diameter for industrial hose..
Check Stock

Dometic SeaStar Pro Outboard Hose Kit, HO5722, Kevlar Reinforced, 22ft.

  • SeaStar PRO HO5722 Kevlar Reinforced Hydraulic Steering Hose Kit includes two (2) 22-Foot Hoses.
  • Custom Multi-Layered Composite Design with Kevlar Reinforcement for Strength.
  • Engineered to Provide your Steering System with Very Low Thermal Expansion Properties.
  • Designed to Exceed SAE and ABYC Specifications and Provide Precise Steering Control not Achievable with Hydraulic Industry Standard Hoses.
Check Stock

Hydraulic A/C Hose Crimper Hydraulic A/C Crimping Tool Hydra-crimp for Barbed and Beaded Hose Fittings

  • Repair AC Hoses on the Vehicle.Automotive AC hose crimping tool is apply for beadlocking fitting and barrier A/C hose..
  • The lightweight hand-held hydraulic hose crimper is very portable and ideal for shop and field applications..
  • This ac hose crimper tool can be easily mounted to a bench using the holding fixture or held securely in a vice.
  • The dies for hydraulic hose crimper snap quickly into the press fixture requiring no pins or screws.
  • The Hose Crimper Kit comes with a complete set of dies covering hose sizes:6 SRB, 6-8 SRB, 10 SRB,12 SRB, #8, #10,#12.
Check Stock