Top Hydraulic Iron Worker

CROSS Manufacturing SBAF2J 143430 SBA Series Cast Iron Double Spool Monoblock Hydraulic Directional Control Valve with joystick, 1st Spool 4-Position Float, 2nd Spool 3-Position, Open Centered, 3/4\ x 3/4\ x 1/2\ NPT Female, 2500 psi, Grey

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 2 Spools Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 2 spools and #8 SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, and more.
  • Max Pressure: 3600 PSI, Inlet Port: SAE 10, Outlet Port: SAE 12, Working Ports: SAE 10, Fluid Temperature: 5 to 176℉, Valve Type: 4 way 3 positions, Mounting: 3 bolts m8 needed.
Check Stock

Ace Hydraulic Driven Centrifugal Pump 2" Suction x 1.5" Discharge USA Made Farmer Bob's Parts FMC-200-HYD-304

  • Max flow: 200 gpm Max pressure: 120 psi Port sizes: 2" FNPT Suction, 1-1/2" FNPT Discharge Pump material: Cast Iron Hydraulic motor: Requires 11 gpm hydraulic flow on closed and open systems Seal material: Viton Carbon/Ceramic (Optional Severe Duty Silicon Carbide available) Impeller material: Chemical Resistant Valox (Optional Cast Iron).
Check Stock

Ace Hydraulic Driven Centrifugal Pump 1.5" Suction x 1.25" Discharge Farmer Bob's Parts FMC-150-HYD-206

  • Max flow: 135 GPM Max pressure: 120 PSI Port sizes: 1-1/2" FNPT Suction, 1-1/4" FNPT Discharge Pump material: Cast Iron Hydraulic motor: Requires 7 gpm hydraulic flow on closed and open systems Seal material: Viton Carbon/Ceramic (Optional Severe Duty Silicon Carbide available) Impeller material: Chemical Resistant Valox (Optional Cast Iron).
  • 014-FMC150HYD206, FMC 150 HYD 206, FMC150HYD206.
Check Stock

Chief G Series Hydraulic Directional Control Valve with Joystick, Hydraulic Flow Control Valve with 2 Spool 3-pos Spring Center - 10 GPM, 3625 PSI, SAE 8 Work, SAE 10 Inlet/Outlet Ports, 10 lb, 220910

  • Hydraulic Spool Valve: Equipped with 1 spool and 1/2" BSPP P port, A port, B port. 3/4" BSPP T port, N port. The maximum pressure of this hydraulic is 3625 PSI, and the maximum flow can reach 21 GPM. The opening and disconnection of hydraulic oil are controlled by connecting the valve to the oil line..
  • Automatically Reset: The standard spool is spring-returned and can be reset to the neutral position. In addition, there is a spring at the bottom of the handle that makes the joystick easy to control..
  • Great Inner Valve: The check valve in the valve body ensures that the hydraulic oil does not return, and the overflow valve in the valve body can adjust the working pressure of the hydraulic system..
  • Compact Structure: 1 spool hydraulic valve is made of aluminum and iron, and the solid structure can provide long-term service. The compact design allows it to install in narrow areas and maximizes its control capabilities..
  • Widely Used: It is used in hydraulic systems in agriculture, horticulture, forestry, construction, and industry. The distributor is adapted to different types of machines: agricultural machines, tractors, sprayers, construction machines, loaders, excavators, sweepers, industrial machines, and for other applications hydraulically controlled..
Check Stock

ANBULL Hydraulic Knockout Punch Set Max 6T with 6 Dies Metric from 16mm to 32mm (Φ5/8\ to Φ1-1/4\), Hydraulic Metal Hole Punch W/Tool Case

  • 【Labor-Saving Hydraulic】: The maximum pressure of the ANBULL hydraulic knockout punch driver can reach 6 tons. It can easily open holes on the thickest 2.5mm iron plate and the thickest 1.5mm stainless steel plate..
  • 【Integrally Formed】: Integrally formed so the hydraulic knockout punch driver does not leak oil..
Check Stock

Xenyem 1300lbs 2 Stage Telescopic Transmission Jack w/ 360°Swivel Wheels Lift Hoist, Adjustable Height Telescoping Transmission Hydraulic, w/Pedal, 35\ to 70\ Lifting Range - Yellow

  • Increased load capacity - hydraulic jack load capacity from 1100 lbs (0.5 tons) to 1300 lbs (0.6 tons).
  • Upgraded Version - upgraded with dual spring, higher pressure, increased the stability and load capacity,as well as the lift speed than single spring..
  • Adjustable - Featuring a telescoping 2-stage hydraulic ram, the transmission jack can be extended from 35.43" to 70.86" in height..
  • Stability and Ease of Movement - Wide heavy duty four foot base and 4 cast iron swivel 360 degree casters, auxiliary ring in the middle of the transmission jack and cast iron swivel casters add ease of movement and greater maneuverability..
  • Precise Positioning - The adjustable saddle provides a wide tilt range to help you place the load in the perfect position. The pallet can be tilted up to 30 degrees. Adjust the angle and position you need by twisting the adjusting bolt, allowing you to position and align the transmission more precisely..
  • Material - The hydraulic jack is constructed of high grade steel for quality and durability. The painted surface prevents rusting..
  • Application - The floor jack can be used in many places, including automotive transmissions, auto repair stations and other objects weighing up to 600KG..
Check Stock

VEVOR Hydraulic Exhaust Pipe Expander, 1-5/8" to 4-1/4" size, 10 T Manual Hydraulic Pipe Stretcher w/4 Dies and 2 Storing Case for Copper, Aluminum Tubes in Car Repairing

  • Wide Expanding Range: The hydraulic exhaust pipe expander provides various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: mild steel expander (1 5/8" - 1 7/8" collet, 2" - 2 1/2" chuck), and aluminum alloy expander (2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" collet, 3 1/8" - 3 1/2" collet, 3 1/2" - 3 7/8" collet, 3 7/8" - 4 1/4" collet)..
  • Labor-saving Hydraulic System: This muffler pipe expander makes pipes expand by using a manual hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a 4 feet high-pressure hose and no-leakage oil cylinder. Pressure: 10 tons..
  • Easy to Install & Operate: Different sizes of collet need to be matched with specified collets. Details are provided in the picture. You need to assemble the expanding part with a hydraulic mechanism and insert it into the pipe..
  • Heavy-duty Construction: All collets are made of Aluminum alloy, ensuring rugged rigidity over an extended service life. The coated surface of the exhaust pipe expander kit provides rust resistance..
Check Stock

Punch, Paper - Three Hole Puncher: Single Punch Paper Shredders, Punches & Scissors

  • [Fast Punch & Precise Positioning] – The hydraulic hole puncher uses a high-power motor, with a punching speed of 2-3 seconds. The punch is precisely designed, and every punch is precise..
  • [Portable & Convenient] – This hole punch is portable, and can be operated anytime, anywhere. Equipped with an auxiliary handle, it can be operated by hand, which is convenient for working at different angles. It can also be installed on the base to work on the platform..
  • [Applicable Range] – This hydraulic punch is suitable for copper/aluminum plates with a thickness of 0.11″~0.31″.
  • iron/steel plates with a thickness of 0.11″~0.23″.
  • 4~6# angle steel/iron. However, it does NOT apply to channel steel!.
  • [Complete Accessories] – The package includes: 1 x punching machine, 1 x big wrench, 1 x base, 2 x hexagon wrench, 2 x screws, 1 x auxiliary handle, 1 x carbon brush, 5 x standard dies: Φ6.5mm/9mm/13mm/17mm/20.5mm (Φ0.25″, 0.35″, 0.51″, 0.67″, 0.8″). The electric punch is packed in an iron box, and the internal parts are arranged neatly, shockproof and drop-proof..
  • [One-year Warranty] – Within one year of purchase, if something goes wrong with the product, you can replace it for free. Please purchase with confidence..
Check Stock

PENNYNANA Modern Elegant 360-Degree Swiveling Hydraulic Barber Chair Hair Beauty Salon Equipment with Crystal Tufted Backrest, Adjustable Height, Black

  • 【ELEGANT AND PRACTICAL SALON EQUIPMENT】: This deluxe hydraulic barber chair with a crystal tufted backrest is a perfect addition to upgrade any style of beauty salon, barber, tattoo shop and at-home studio. Featuring ergonomic design and exquisite stitching, the 360-degree swiveling chair offers both the elegant style and the maximum comfort, making the customer feel at ease..
  • 【STABLE AND DURABLE CONSTRUCTION】: Structured with sturdy iron frame, high-density sponge filling and quality PVC leather covering, the chair is long-lasting with little maintenance, which can be easily cleaned with a damp cloth. The heavy-duty iron base gives strong fixity and stability to the whole structure..
  • 【ERGONOMIC SWIVELING SEAT WITH ELEGANT BACKREST】: This barber chair features an ergonomic seat with soft built-in sponge, full-sized armrests and high thick backrest to ensure your clients feel safe and comfortable after a long seating. The seat can be swiveled 360 degrees to meet your working need..
  • 【ADJUSTABLE HEIGHT WITH HYDRAULIC BASE】: With a quality hydraulic pump, the height of the chair can be simply adjusted (16.1” to 21.6”) using the foot lever to facilitate your work. A large round chassis prevents wobble from various movements..
Check Stock

Maxim TC Double Acting Hydraulic Tie Rod Cylinder - 2 Bore Hydraulic Cylinder - Tie-Rod Cylinder for Double Acting Applications - 2” Bore, 6” Stroke, 2500 PSI, 16.25'' Retracted - 3/8 NPT Ports

  • SPECIFICATIONS: Maxim’s hydraulic cylinders has a 2” bore with 1” pin, 1.125” rod with a maximum stroke length of 6,” 3/8 " NPT Ports with 2500 PSI and column load of 7850 lbs. It measures 16.25” when retracted and 22.25” when fully extended..
  • HEAVY-DUTY: With a maximum working pressure of 2500 PSI and column load capacity of 7850 lbs, this tie-rod cylinder for double acting applications is made for rugged agricultural applications that require reliable and consistent performance..
  • EASY TO USE: Our double acting hydraulic cylinder has a simple but compact design that can be easily installed and disassembled. These tie-rod hydraulic cylinders are manufactured per strict NFPA standards and are interchangeable..
  • VERSATILE: This double action hydraulic cylinder is adaptable - it comes in customizable bore sizes from 2” to 4” and stroke lengths from 4” to 48”. Although made for rugged agricultural use, the tie-rod cylinder can be used in exacting applications..
  • LONG LASTING: Made from top-grade ductile iron with hard-polished chrome plating, this 6 stroke hydraulic cylinder is equipped with Buna N O-ring and zinc seals. It is durable and not susceptible to damage from wear and tear..
Check Stock

Oberdorfer N993R Gear Pump with Relief Valve, 8.8 gpm, 1/2\ NPT, 20 ft Maximum Suction Lift

  • SPECIFICATIONS: The International Fluid Power Birotational Gear Pump is a heavy-duty gear pump with a 2-bolt B mount, 1” NPT work port, 3000 PSI, 23.8 GPM flow rate, and 2400 maximum RPM. It weighs 37 lb..
  • HIGH EFFICIENCY: With 2400 max RPM and 23.8 GPM flow rate, this hydraulic gear pump offers high volumetric output. The IFP gear pump provides exceptionally dynamic performance and operational efficiency in demanding conditions..
  • ROBUST: Our hydraulic rotary pump is equipped with top-grade cast iron flanges, shaft bearings, castings, and an aluminum-alloy body to handle system transmission pressures of up to 3000 PSI. Its endurance makes it ideal for harsh conditions..
  • CONVENIENT: This low flow hydraulic pump, made from top-grade materials and precision-honed to perfection, is compact, portable, and interchangeable with Parker "P51.
Check Stock

Union Ironworkers Local 17 American Flag Cleveland Ohio Long Sleeve T-Shirt

  • Local 17 Cleaveland, Ohio American flag ironworker. Iron worker silhouette drawing..
  • Represent your union with this patriotic design. Great for working iron, for an ironworker picnic, ironworker's march in a parade or union meeting..
  • Lightweight, Classic fit, Double-needle sleeve and bottom hem.
Check Stock