Top Hydraulic Leg Leveler

Anwenk Leveling Feet Heavy Duty Furniture Levelers Adjustable Table Leg Leveler w/Lock Nuts for Furniture,Table, Cabinets, Workbench,Shelving Units and More,Black

  • 【Heavy Duty Leveling Feet】- These are 4 heavy gauge, plated steel furniture legs that help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more..
  • 【Versatile Threaded Legs】- The leveling feet have heavy 3/8"-16 (10mm) dia shaft that adjusts height from 0" to 2-1/2". Free spinning foot design compensates for uneven/ irregular floors. Polyethylene cap protects floors and block moisture from getting to the foot..
  • 【L-Shaped Mounting Bracket】- Ensures the cabinet load is carried by the leveler, Not the screws. The leg leveler has 7/16” wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability..
  • 【1320LBs Weight Support】- Each leveling leg support 330LBs, 4 legs support total 1320LBs. These heavy duty leg levelers hold up almost all heavy furniture you may have,without worrying about its quality..
  • 【Hex Wrench for Easy Adjustment】- 5mm hex wrench is included to allow micro adjustment on each leg until they are perfectly level to your desired height.Package includes 4x leveling feet, 16 Installation screws , 5mm hex wrench..
Check Stock

Artilife 4Pack Heavy Duty Furniture Leveler Legs 2 Inch Height Adjustable Feet and Hexagon Nuts Lock for Furniture, Cabinets, Workbench

  • 【L-Shaped Mounting Bracket】 Ensures the cabinet load is carried by the leveler, Not the screws. The leg leveler has 7/16” wide ledger,allows the mounting bracelet hooks onto the bottom edge of furniture for better support and stability..
  • 【Heavy Duty】Adjustable table legs are made of galvanized iron furniture legs that help you adjust and level your table, cabinets, workbench, shelving units, bookcase and more..
  • 【Versatile Threaded Legs】 The leveling feet have heavy 3/8"-16 (10mm) dia shaft that adjusts height from 0" to 2-1/2". Free spinning foot design compensates for uneven/ irregular floors..
  • 【Widely Use】Leveling feet is perfect for leveling applications, balance - adjustments to table, cabinets, workbench, shelving units, bookcase and more..
  • 【Package Included】4 x Leveler Legs, 16 x Screws, 4 x Locknuts, 1 x Hex Wrench..
Check Stock

Vestil PE-2572 Electric Hydraulic Edge-O-Dock Leveler, Steel, 72\ Usable Width, 25,000-lb. Capacity

  • Electric hydraulic dock leveler for correcting height differences between truck and loading dock.
  • 18" high bumpers on each end for protecting dock and truck.
  • 1/3 HP, 115 Volt, 1 phase motor with control button for easy operation.
Check Stock

4pcs Pool Table Leg Leveler, Universal Adjustable Levelers Furniture Levelling Feet, 5 Inch Heavy Duty Leveling Risers for Football/Soccer Table, PingPong Table, Air Hockey Table(Silver,size:127x70mm)

  • Widely Use: This multifunctional leveler is suitable for billiard /pool table, soccer / football table, pingpong table, air hockey table, etc, meeting different playing table adjusting requirements..
  • Design: 3-hole screw connections with adjustable height and spinable design, it can be used for light, medium or heavy duty tables, raising your billiard table to your desired height..
  • Material: Metal casting body with supporting threaded bolt plus sturdy base, this table leg leveler is durable, stable, dustproof and rust resistant, helping to extend service time of playing tables..
  • Floor Protection: Fitting for many floors such as hardwood/tile/carpeting floors, designed to level or adjust to needed height. Protecting from floor marring, table leg scratch, moisture or imbalance..
  • Package Includes: 4 x Billiard Table Leg Levelers, 4 x Metal Plates with Screw Connection Holes, 8 x Screws. Can be adjustable to fit most of billiard balls table and tabletop foosball..
Check Stock

TasuoX M6 Screw in Adjustable Furniture Levelers - Galvanized Steel Threaded Furniture Leveling Feet - 30 Pack Furniture Feet for Table Chair Cabinet Patio Furniture Legs

  • M6 LEVELER SIZE - Please confirm the correct leveler size before purchasing, M6 thread is a common size for furniture legs made in China (18 mm shaft....
  • MULTIPLE USES - Patio furniture feet avoid direct contact of furniture legs with the floor, reduce friction and noise, and keep floors, tiles or....
  • STURDY MATERIALS - Furniture feet are made of high-quality hard plastic base and galvanized screws, the base is non-slip and durable, will not scratch....
  • EASY TO INSTALL - Use a power drill to drill a hole in the chair and table leg that needs to be leveled, then screw the furniture leveler into your....
  • WIDE APPLICATION - These chair levelers screw in are suitable for all types of floors, including wood, laminate, hardwood, tile, and carpet. Widely....
Check Stock

ESPN 56\ Arcade Foosball Table, Black/Grey

  • Weighted players for easy rotation to defense position. 5/8" chrome plated steel rods for intense play..
  • Reinforced aprons with two tone color PVC laminate for additional strength and support. Strong leg construction with full leg panel and oversized 5" leg leveler for extra stability and even playing surface..
  • Comfortable octagonal handle grips for precise player control and ramped playfield edges to ensure the ball stays in motion..
  • Traditional bead scoring to keep track of the action. Accessories included: 2 soccer balls..
  • Great addition to any game room. Dimensions: 56" x 28. 75" x 34. 5"..
Check Stock

Heavy Duty Leveler Legs w/Lock Nuts - Leveling Feet for Furniture, Cabinets, & Workbench - 4 Pack

  • HEAVY DUTY - Made from 14 ga. (.080") steel. Load capacity is 2,000 lbs. per leg.
  • INTEGRAL LEDGER - Ensures that the load is carried by the leveler, not the screws.
  • LOCK NUTS INCLUDED - An absolute MUST for the workshop or garage, especially if any vibrating machinery is involved..
  • FREE SPINNING FOOT - Compensates for irregular floors. Polyethylene cap protects floors as it keeps moisture away.
  • YOU GET - 4 Legs, 16 Installation screws (#10 x 3/4"), 5mm hex wrenchDescriptionGot a 8,000 lb. workbench that needs leveling?... Read On!.
  • D.H.S. is pleased to offer a leveler that's tough as nails, but as easy to install as it is to adjust..
  • Housings are made from 14 ga. (.080"), zinc plated steel. Each has a 7/16" wide ledger that hooks under the cabinet. This ensures the load gets carried directly on the leveler, not the screws. BTW the screws we provide are no joke. They're 3/4" long #10 Philips head (nickel plated), perfect for supporting a bookcase with plywood sides or a workbench with 4 x 4 legs..
  • The legs have a 10mm dia. (a heavy 3/8") shaft that adjusts from 0" to 2-1/2". The feet are 1-1/4" dia. and spin freely on the threaded shaft. This allows them to tilt if your floor is really bad. Adjustments are easier too, as y....
Check Stock

34 1/2' Hafele Table Legs Set of 4, Steel, Black

  • Leg screws into the steel square mounting plate with an M10 bolt.
  • Plastic levelers are pressed-in, they can be removed and pounded back in if legs need to be cut.
  • 220 lbs per leg (100 kg) Static load bearing capacity.
  • 34 1/2" High, including the mounting plate and the leveler.
Check Stock

Heavy Duty Furniture Levelers 3/8''-16 Thread w/ T-Nut Kit Furniture Leveling Feet Adjustable Furniture Levelers for Tables,Cabinets,Chairs,Workbench,Sofa and More,Large Base Supports 1320LBs-4 Packs

  • [Support Heavy Furniture] This commercial quality heavy duty furniture leveler comes with strong steel T-nut to lock and stablize the straightener, each can support max 330LBs,a set of four supports furniture weight 1320LBs! Fits for heavy furniture such as cabinets,tables,beds,workbench,sofa,chairs and more..
  • [Adjustable Leveling Feet] The shaft of this furniture leg is 1.77 inch long with 3/8” thread which is universally used in American Made Furniture. With a 1-3/8” diameter and 1/2”thick metal base, it can support fully adjustable height from 3/4” to 1-3/4” for maximum support and adjustability according to your needs..
  • [Protect Your Floors] Beside stop shaking and reduce vibration on uneaven floors, these heavy duty furniture leveling feet are also equipped with a felt pad for the base to avoid direct contact between the furniture legs and the ground, protecting the floor, tile or carpet from damage or scratches.No noise will be heard while moving or sliding the furniture..
  • [Easy To Install] Pre-drill a hole with a diameter of 0.5 inch on the furniture leg,then insert the T-nut(tightened with a hammer)with mounting screws, screw in the leg levelers to your desired position to complete the adjustment.If it is a metal leg, you need to weld ....
Check Stock

Lesu 1/14 Metal Hydraulic Rc Backhoe Loader Aoue Bl71 2 in 1 Electric Excavator

  • Front and rear aluminum alloy wheels, high-quality rubber tire covers, full drive 4 * 4 power differential locking axle, and the reduction ratio of front and rear axles is 1:2.7..
  • The front shovel is equipped with a stainless steel bucket, and the bucket has a hydraulic opening and closing function..
  • Front fork, hydraulic front shovel, hydraulic bucket, one machine with multiple functions.
  • The rear digging arm is equipped with a digging assembly to move laterally, and the digging range is larger..
  • Hydraulic support leg, more stable operation.The rotary cab seat is convenient for the driver to operate at both ends and has a higher degree of simulation..
  • The hydraulic system is equipped with a hydraulic reversing valve, switching valve, brushless ESC, oil pump, fine stainless steel oil cylinder, overflow valve and other hydraulic components to form a precise hydraulic system, which is more coordinated and linear..
Check Stock

12Pack Leveling Feet Heavy Duty Furniture Levelers Height Adjustable Table Legs Leveler with Screw for Furniture, Cabinets, Workbench, w/Corner Protector Guard Brackets

  • Balance and adjust the furniture in your home. Suitable for cabinets, tables, or shelving units,etc.
  • 1-7/8" Tall Leveler 7/8" Base. With 1-9/16" x 1-9/16" Corner Protector Edge Guard.
  • Made of heavy gauge plated steel with a 440 Lb capacity per leg leveler.
  • Pivoting steel base is capped in polyethylene for carpet and floor protection.
  • 12 x Corner Leveling Feet + 48 x M4 Screws, 1/4"(8mm) Thread, Swivel/Tilting base with Nylon Glide.
Check Stock

16.4FT Tall Telescopic Extension Ladders Aluminum Collapsible Telescoping Ladder Retractable Telescope Ladder for Home RV Loft, 330LB Capacity

  • 【STURDY CONSTRUCTION】The Bottom is Made Of Silicone Pad,Non-slip, Wear-resistant and Durable.
  • Ladder Scaffold Brackets, Screw structure is Safer, more Stable and Reliable..
  • 【UNIVERSAL FIT 】 Use the Ladder Leveler to instantly level any ladder you have, including your step ladder..
  • 【PORTABLE&EASY TO ASSEMBLE&DISASSEMBLY】 No bolts. No clamps. Changing from ladder to ladder is quick and easy.
  • Level a ladder in seconds with unlimited adjustment positions,One-Click Suspension for Easy Dis assembly..
  • 【STRONG BEARING CAPACITY】 Supports up to 550 lbs. (250 kilos), exceeding the ladder’s 300lb, 1A duty rating..
  • 【WIDELY USED 】 This extension Ladder Leg Leveler works indoors and out, use it on uneven ground, roof tops, and stairs, building materials & ladders, ladder-accessories..
Check Stock