Top Hydraulic Pilot Check Valve

GAS Air Compressor Pilot check valve unloader valve combo 95-125 NG7

  • GAS Air Compressor Pilot check valve unloader valve combo 95-125 NG7 30 scfm Rating.
  • Unloader valve (continuous run unloader) for gas & electric powered air compressors.
  • 95-125 factory setting. pressure can be adjusted 30-40 psi up or down.
  • 1/2" COMPRESSION TOP Inlet x 1/2" MALE Pipe Thread outlet..
Check Stock

Chief G Series P80 Hydraulic Directional Control Valves - Hydraulic Speed Control Valve - 3 Spool, 21 GPM, 4 Way 3 Pos Spring Center, SAE 10 Inlet and Work Ports, SAE 12 Outlet Ports, 3625 PSI

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 5 Spool Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 5 spools and SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • High Efficiency - The relief valve range is up to 3600 PSI and the maximum flow is up to 13 GPM.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, log splitters, and more.
Check Stock

Chief Directional Control Valves 1 Spool 4 Way 4 Position - Hydraulic Directional Control Valve with Spring Center - 25 GPM, 1/2\ NPT Work Port, 3/4\ NPT Outlet Port, 3000 PSI, 16 lb, 220572

  • SPECIFICATIONS: The Chief P40 manual Directional Control Valve for hydraulic systems has a 4 way, 3 pos tandem center with 10 GPM, maximum working pressure of 3625 PSI, temperature of 176°F, standard SAE 8/10 inlet/outlet ports. It weighs 9.4 lb..
  • FAST ACTING: Our 4 way hydraulic control valve has 4 ports that facilitate super fast extension and retraction of double-acting hydraulic cylinders, producing sufficient pressure required in a wide range of applications..
  • PRECISE: This directional control valve hydraulic has a two spool construction equipped with lands and undercuts. The precision machined construction allows the spools to open and close fluid flow paths effortlessly with high accuracy every time..
  • EFFICIENT: Our 3 pos, hydraulic directional control valve allows the hydraulic fluid back into the tank without forcing it over the relief valve, reducing heat generation and a buildup of backup pressure..
  • MULTIPURPOSE: The P40 hydraulic valves are extremely versatile and can perform several functions in their central position - they can easily unload hydraulic pumps, stop, allow, or change the direction of fluid flow in hydraulic circuits. Power beyond and closed center plugs may be added and are sold separately..
Check Stock

CROSS Manufacturing SBAF2J 143430 SBA Series Cast Iron Double Spool Monoblock Hydraulic Directional Control Valve with joystick, 1st Spool 4-Position Float, 2nd Spool 3-Position, Open Centered, 3/4\ x 3/4\ x 1/2\ NPT Female, 2500 psi, Grey

  • Durable - The hydraulic directional control valve is a cast-iron structure, which can be used for a long time.
  • 2 Spools Hydraulic Valve - The hydraulic valve can manage and guide the flow of hydraulic oil between hydraulic pumps and hydraulic cylinders, motors, tanks, and more.
  • Double Acting - This control valve comes with 2 spools and #8 SAE O-ring in/out ports. All spools are standard double-acting spools, which are very suitable for double-acting cylinders.
  • Widely Used - The hydraulic directional control valve is very suitable for small tractors, tractor loaders, fellers, forklift environmental vehicles, light loaders, and more.
  • Max Pressure: 3600 PSI, Inlet Port: SAE 10, Outlet Port: SAE 12, Working Ports: SAE 10, Fluid Temperature: 5 to 176℉, Valve Type: 4 way 3 positions, Mounting: 3 bolts m8 needed.
Check Stock

Hydraulic Directional Control Valve 5 Spool 13 GPM 3600 PSI SAE Ports 4 Way 3 Positions Double Acting Hydraulic Valve for Tractors Loaders Tanks Loaders Log Splitters

  • SPECIFICATIONS: This log splitter hydraulic flow control valve has a 2-spool, 3-way construction with a processing rate of 18 GPM, ¾” NPT inlet and outlet ports, ½” NPT work ports, and withstands 3625 PSI pressure. It weighs only 5 lb (2.26 kg)..
  • POWER PACKED: With a processing rate of 18 GPM, the hydraulic valve log splitter is way more powerful and efficient than normally available options. This log splitter valve with one spool can split heavy, dense logs in minimal time..
  • HIGH TOLERANCE: This wood splitter valve control with a hydraulic relief valve tolerates pressure up to 3625 PSI. This prevents internal damage to the hydraulic valve handle even when it is being used to exert intense pressure..
  • FAST ACTION: Our wood splitter valve control has a 4 way, 3 position tandem spring center that extends the cylinder’s piston rapidly and helps in high-speed, high precision log splitting. Chief’s hydraulic valve 1 spool is simple and fast..
  • TIME SAVING: Our log splitter valve has an auto return detent lever handle. You can position the next log to be split while the piston repositions itself. The log splitter auto return detent makes log splitting convenient and quick..
Check Stock

Lesu 1/14 Metal Hydraulic Rc Backhoe Loader Aoue Bl71 2 in 1 Electric Excavator

  • Front and rear aluminum alloy wheels, high-quality rubber tire covers, full drive 4 * 4 power differential locking axle, and the reduction ratio of front and rear axles is 1:2.7..
  • The front shovel is equipped with a stainless steel bucket, and the bucket has a hydraulic opening and closing function..
  • Front fork, hydraulic front shovel, hydraulic bucket, one machine with multiple functions.
  • The rear digging arm is equipped with a digging assembly to move laterally, and the digging range is larger..
  • Hydraulic support leg, more stable operation.The rotary cab seat is convenient for the driver to operate at both ends and has a higher degree of simulation..
  • The hydraulic system is equipped with a hydraulic reversing valve, switching valve, brushless ESC, oil pump, fine stainless steel oil cylinder, overflow valve and other hydraulic components to form a precise hydraulic system, which is more coordinated and linear..
Check Stock

Hitachi Pilot Unloader Check valve Combo for Gas Compressors 885426 EC2510E

  • Replaces Hitachi 885426 for EC2510E Gas Compressors 110 - 140 PSI Made in USA.
  • Check valve /Unloader valve / Pilot valve all in one - (continuous run unloader) for gas & electric powered air compressors.
  • 110 - 140 PSI factory setting. pressure can be adjusted 30-40 psi up or down.
  • 1/2" Metric Flare TOP Inlet x 3/8" Male Pipe Thread outlet to air tank.
  • 30 scfm Rating ! Pressure can be adjusted 30-40 PSI Higher or Lower. If pressure adjustment is needed, Please see Pic attachment for adjustment instructions..
Check Stock

AKWH 15810-RKB-J01 VTEC Solenoid Spool Valve with Gasket Replacement for Hon-da Ody-ssey V6 3.5L 2005-2007 Pilot FWD Acc-ord V6 3.0L 2006-2008 15810RKBJ01

  • ...05-2007 Ody-ssey EX / EXL / EXL-T, 2006-2008 Pil-ot 2WD MODELS ONLY OF TRIMS: LX / LXVP / EX / EXL / EX-SE P/N 15810-RKB-J01.
  • VTEC Solenoid Spool Valve Replacement for: 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2006 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2006 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2005 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2005 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head..
  • VTEC Solenoid Spool Valve Replacement for: 2008 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2007 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EXL Submodel Cylinder Head.
  • 2007 Hon-da Ody-ssey V6 3.5L (3471cc), EX-L Submodel Cylinder Head.
  • 2007 Hon-da Pilot FWD, V6 3.5L (3471cc) Cylinder Head.
  • 2006 Hon-da Acc-ord V6 3.0L (2997cc), ELECTRIC/GAS Cylinder Head..
  • VTEC (which stands for Variable Valve Timing and Lift Electronic Control) is an electronic and mechanical system in some Hon-da engines that allows the engine to effectively have multiple camshafts. As the engine moves into different rpm ranges, the engine's computer can activate ....
Check Stock

HASMX 5140186-73 / E101362 Air Compressor Check Valve Replacement 90 Degree Left Valve for Select Craftsman, Porter Cable, and Husky Models, Black and Decker Part Number E101362 (1-Pack)

  • GAS Air Compressor Pilot check valve unloader valve combo 145-175 NG7 30 scfm Rating.
  • Unloader valve (continuous run unloader) for gas & electric powered air compressors.
  • 145-175 factory setting. pressure can be adjusted 30-40 psi up or down.
  • 1/2" COMPRESSION TOP Inlet x 1/2" MALE Pipe Thread outlet..
Check Stock

SkyTech AF-LMF/R Remote Controlled Fireplace Gas Valve Control Kit

  • Millivolt safety pilot kit with remote for use with 18 to 30 inch gas logs.
  • Manual On/Off gas valve kit with On/Off remote control.
  • 225 degree rated valve with exclusive safety seal within the gas valve.
  • Includes quick mount pilot assembly, damper clamp, valve, solenoid, flex line, and remote.
  • For use with Natural Gas (LP conversion kits available).
  • Valve kit measures 3 3/4″ W x 4″ D 2 3/4″ H.
Check Stock

BESTOOL Air Hydraulic Pump - 10,000 PSI Hydraulic Foot Pump Pressure 1/2 Gal Air Over Hydraulic Pump (Single Acting) Green - with Hose

  • BESTOOL Air actuated hydraulic treadle pump internal pressure relief valve for overload protection, prevent oil leakage.The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Air powered hydraulic pumps maximum adjustable pressure: 10,000PSI, used for all 10-ton applications.Output oil 98 cubic inches/1.6 liters Fuel tank.Connector Type: 3/8" NPT quick hydraulic coupler with dust cap..
  • This hydraulic ram pump features a high-quality aviation aluminum pump core and with a more durable aluminum reservoir.Hydraulic air pump is equipped with a 6.5 ft / 2 m high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer..
  • The air over hydraulic pump adopts a humanized pedal motion design, which is easy to control and operate, save time and effort and has strong power, pressure adjustable.Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • This air hydraulic foot pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single acting ram applications..
Check Stock

BESTOOL 10000PSI Air Hydraulic Pump, 1/2 Gal Reservoir Foot Actuated Hydraulic Pump for Rams, Presses, Hydraulic Pullers, Quickly Increase The Hydraulic Oil

  • The BESTOOL Air Hydraulic Pump features an internal pressure relief valve for overload protection, ensuring oil leakage prevention and hydraulic component safety. The convenient 2-stage release mechanism enables fast or metered ram return while minimizing hydraulic shock..
  • This air-powered hydraulic pump boasts a maximum adjustable pressure of 10,000 PSI, making it suitable for all 10-ton applications..
  • Constructed with a high-quality aviation aluminum pump core and a durable aluminum reservoir, our hydraulic ram pump is designed to withstand demanding industrial applications..
  • The air over hydraulic pump features a user-friendly, foot-actuated design that allows for easy control and operation, saving time and effort with its powerful and adjustable pressure. The built-in internal relief valve safeguards the hydraulic components regardless of the hydraulic pressure..
  • Designed exclusively for use with single-acting cylinders, this air hydraulic foot pump efficiently operates a wide range of industrial and construction single-acting ram applications, making it a versatile and reliabl....
Check Stock