Top Hydraulic Pipe Puller

Compatible with Compression Sleeve Puller（03943）-- Sleeve Remover for 1/2-Inch Compression Fittings Only -- Corroded & Frozen Supply Stops --Plumbing Tools Compression Ring Removal Tool

  • Make Your Life Easy--This sleeve remover removes 1/2-inch copper water compression sleeve.This compression sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe..
  • Saves A Lot Of Time-- if you don't have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. Saves a lot of time around cutting old pipes..
  • Resistant & Wear Resistant.--Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe.Ideal for working on frozen or corroded supply stops,corrosion resistant & wear resistant..
  • Operating Steps--1.Remove the old compression fitting or the old angle stop. 2.Put the nut of pipe to the golden threaded mouth of the puller tool to tighten the screw 3.Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. 4.T....
Check Stock

Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool

  • 【No Damage To Walls & Copper & Supply Lines】This ferrule puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
  • 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
  • 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut....
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Flaring Tool Set Brake Repair Brake Flaring Tools for 1/4 -3/8 Brake Flare Tool with Tube Cutter and Deburrer Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with φ 1/4", 5/16", 3/8" expanding dies and adapters, including 45° flaring cone,....
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with....
  • Pipe Cutting & Deburring: The flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging....
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a....
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper and stainless steel piping. It is an excellent tool for repairs on....
Check Stock

Durable Universal Hydraulic Pipe Expander Fuel Line Flaring Tool Set Dilator Scraper Cutter Hole Splint

  • Expanding & Flaring Functions: This hydraulic flare tool features 2-in-1 tube expanding and flaring functions with eight expanding dies(3/16", 1/4",....
  • Manual Hydraulic Mechanism: This flaring tool set achieves the pipe expanding and flaring with a hydraulic mechanism. The hydraulic tool is designed....
  • Pipe Cutting & Deburring: This flaring tool comes with one pipe cutter and one deburring tool, both of which are easy to use with the handwheel....
  • Durability & Portability: The flaring tool is made of durable hardened steel, which is reliable and built to last, saving your money. Besides, the....
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding and flaring soft metal tubing and piping, such as copper and aluminum....
Check Stock

INTSUPERMAI Pipe Cutter Round Pipe Cutting Machine Pipeline Hydraulic Ppipe Cutting Machine Electric Hydraulic Fire Pipe Galvanized Pipe Cutting Machine 220V

  • Pipeline hydraulic pipe cutting machine is used for ordinary steel pipe galvanized pipe, plastic-lined pipe, spiral pipe and seamless steel pipe cutting. Widely used in pipeline construction related to fire protection, construction, water supply mines, coal mines, etc..
  • Diameter of steel pipe that can be cut:40-280mm, The wall thickness of the steel pipe that can be cut:3-6mm, Jack load:5T, Power:750W, Voltage:220V.
  • Automatic return design: Rotate 90° clockwise to tighten the hydraulic oil valve, then press the handle down, turn 90° counterclockwise to loosen the hydraulic oil valve, and the cutting blade returns to its original position.
  • Triangle bracket: stable bracket with roller design, adjustable roller distance, suitable for different pipe diameters, adjustable bracket height, easy to lay the tube flat and cut the tube without deviation.
  • Comes with five roller, which is suitable for cutting pipes of different sizes..
Check Stock

VEVOR Hydraulic Exhaust Pipe Expander, 1-5/8" to 4-1/4" Size, 10 T Pedal Pump Included w/4 Dies and 2 Storing Cases for Copper, Aluminum Tubes in Car Repairing

  • Wide Expanding Range: The hydraulic exhaust pipe expander provides various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: mild steel expander (1 5/8" - 1 7/8" collet, 2" - 2 1/2" chuck), and aluminum alloy expander (2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" collet, 3 1/8" - 3 1/2" collet, 3 1/2" - 3 7/8" collet, 3 7/8" - 4 1/4" collet)..
  • Labor-saving Hydraulic System: This muffler pipe expander forces pipes to expand by using an air hydraulic mechanism. A 10-ton air hydraulic foot pump with a 6 feet high-pressure hose makes your expansion effortless..
  • Easy to Install & Operate: Different sizes of collet need to be matched with specified collets. Details are provided in the picture. You need to assemble the expanding part with a hydraulic mechanism and insert it into the pipe..
Check Stock

VEVOR Hydraulic Exhaust Pipe Expander, 1-5/8" to 4-1/4" size, 10 T Manual Hydraulic Pipe Stretcher w/4 Dies and 2 Storing Case for Copper, Aluminum Tubes in Car Repairing

  • Wide Expanding Range: The hydraulic exhaust pipe expander provides various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: mild steel expander (1 5/8" - 1 7/8" collet, 2" - 2 1/2" chuck), and aluminum alloy expander (2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" collet, 3 1/8" - 3 1/2" collet, 3 1/2" - 3 7/8" collet, 3 7/8" - 4 1/4" collet)..
  • Labor-saving Hydraulic System: This muffler pipe expander makes pipes expand by using a manual hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a 4 feet high-pressure hose and no-leakage oil cylinder. Pressure: 10 tons..
  • Easy to Install & Operate: Different sizes of collet need to be matched with specified collets. Details are provided in the picture. You need to assemble the expanding part with a hydraulic mechanism and insert it into the pipe..
  • Heavy-duty Construction: All collets are made of Aluminum alloy, ensuring rugged rigidity over an extended service life. The coated surface of the exhaust pipe expander kit provides rust resistance..
Check Stock

VKALTUL Pipe Olive Remover Puller Tool Easy Removal Without Damage, Olive Puller Ferrule Puller, Compression Sleeve Puller Suitable for Brass Olive Pipes with Diameters of 1/2in & 3/4in

  • 【No Damage】VKALTUL pipe olive remover puller tool is used to remove used or damaged olives from the air-conditioning pipes without damaging the pipe by uillizing compression fittings to lock nut. It can increase torque and remove olives more easily..
  • 【Two in One】The olive puller is combined with one double hex and one single hex wheel socket. The double hexagonal one is suitable for 1 / 2 inch diameter brass pipe, and the single hexagonal one is suitable for 3 / 4 inch diameter copper pipe. Two in one design is easy to carry and store, and does not occupy space..
  • 【Premium Material】This compression ring removal tool is made of solid brass with high strength, high hardness, corrosion resistance, wear resistance, high finish, which have long service life..
  • 【Easy to Use】Ferrule blaster ferrule puller is easy to operate, and you can work without reading the manual or using other tools, reducing the working time and improving the working efficiency..
  • 【Save Effort】The zinc-plated Tommy bar at the head of ferrule puller is designed by the lever principle, and can move left and right according to the demand to achieve the effect of labor saving..
Check Stock

VEVOR Hydraulic Flaring Tool Kit 45° Double Flaring Tool Brake Repair Brake Flaring Tools for 3/16 -1/2 Brake Flare Tool with Tube Cutter and Deburrer 32 PCS Tube Flaring Tools for Copper Lines

  • Tube Expanding Functions: This hydraulic flaring tool is equipped with a 45° flaring cone and φ 3/16 - 1/2 inch expanding dies and adapters, including, push connects, GM fuel lines, GM transmission cooling line, 45° and double flares, ISO bubble flares..
  • Manual Hydraulic Mechanism: This hydraulic flare kit achieves the pipe expanding with a hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a pressure relief valve and no-leakage oil cylinder. You can easily operate this tool without effort..
  • Pipe Cutting & Deburring: The double flaring tool comes with a mini pipe cutter and deburrer, which can help to flare pipe. The cutter cuts tubes ranging from 1/8" -5/8" quickly with a solid and sharp blade. The deburring tool is used for cleaning the interior and exterior of tubing..
  • Durability & Portability: The flaring tool is durable 40 CR steel, which is reliable and built to last. Besides, the flaring tool kit is stored in a plastic toolbox, reducing the possibility of missing parts. It is compact and easy to carry..
  • Wide Application: This hydraulic flaring tool kit is suitable for expanding copper piping. It is an excellent tool for repairs on vehicles or making lines off a vehicle, ideal for the refrigeration and ai....
Check Stock

VEVOR Hydraulic Pipe Crimping Tool Copper Crimping Pliers with Jaws 1/2 12.7mm 3/4 19.05mm 1 25.4mm 10T Hydraulic Copper Tube Fittings Crimper 40CR Steel for Copper Tube Plumbing and Fitting

  • 10T Crimping Power: Fits 1/2"(12.7mm), 3/4"(19.05mm), 1"(25.4mm) copper tubes. Our hydraulic pipe crimping tool features excellent crimping....
  • Changeable Dies 1/2", 3/4", 1": With ball-bearing springs inside the head, simply slide in and out to change crimping dies of different sizes. This....
  • Hydraulic System: The hydraulic pipe crimper is constructed of 40CR steel with punching & forging process and powder-coated treatment. It is an....
  • Easy & Reliable: Thickened and insulated handles give you a comfortable and secure user experience. Fitted with an oil return valve, this hydraulic....
  • Wide Application: The hydraulic copper pipe crimping tool is suitable for copper pipes, copper fittings & joints, copper sleeves. It is widely applied....
Check Stock

INTBUYING 10T Hydraulic Cylinder Liner Puller Dry-Type Splitter 80-137mm with Box（Dry-Type）

  • 【Computer Desk】10T Hydraulic Cylinder Sleeve Liner Puller Dry-Type Splitter 80-137mm with Box ..
  • 【Parameter Details】Maximum pressure: 10T.
  • Max Axial maximum pull distance： 50mm.
  • 【Included】9X pull plate ,1x Lifting plate,1x cardan joint,1x Lifting cylinder,1x handle,2x cylinder sleeve connecting rod,2x cylinder sleeve stand,1x cylinder sleeve beam.
  • 【Description】80-137mm 10T hydraulic cylinder liner puller dry-type Splitter：80 85 88 93 100 102 105-106 125-126 137..
  • 【Guaranteed】If there is any questions please feel free to contact with us, our experienced TBVECHI customer service team will response in 24 hours. If you’re not 100% satisfied with your purchase, we will provide a money-back guarantee..
Check Stock

Olive Puller Not Damage The Pipe Olive Remover Ferrule Puller Corrosion-Resistant Copper Pipe Fittings Suitable for Brass Pipes with Diameters of NPT 1/2 Inch & NPT 3/4 Inches Ferrule Removal Tool

  • 【Warm tips】The outer packaging state of the olive puller is NPT 1/2 Inch and NPT 3/4 Inches, and the inner packaging state is 15mm+22mm. Due to a mistake in our warehouse,the size label in the inner package was wrongly attached. In fact, the pullers shipped by Amazon do indeed work on brass pipes with diameters of NPT 1/2 Inch & NPT 3/4 Inches.Please refer to the actual use..
  • 【Olive Puller That Will Not Damage The Pipe】This DUOYI olive puller is an ideal tool for taking out olives.Without damaging the pipe,puller utilises the compression fitting locking nut to remove the olives which used or damaged from the copper piping..
  • 【Suitable For Brass Pipes With Diameters Of NPT 1/2 Inch & NPT 3/4 Inches】The olive puller can work on air-conditioning pipes,and is suitable for brass pipes with diameters of NPT 1/2 Inch & NPT 3/4 Inches..
  • 【Abrasion-Resistant & Corrosion-Resistant Solid Brass】The DUOYI ferrule puller is made of high-quality solid brass,which not only has high strength and high hardness,but also has good wear and corrosion resistance. In addition,the olive puller has a smooth surface High,with high-grade texture,and long service life,can provide you with long-term service..
  • 【Easy To Use】Olive puller is easy to operate,and you can ....
Check Stock