Top Hydraulic Quick Disconnect Fittings

DOZYANT 24 Feet 1/2 ID Natural Gas Hose Propane Gas Grill Quick Connect/Disconnect Hose Assembly with 3/8 Female Flare by 1/2 Male Flare Adapter for Outdoor NG/Propane Appliance

  • 1/2" ID natural gas hose with 1/2" Quick Disconnect Plug Kit x 1/2" Female Flare Fittings. Use to convert outdoor appliance to natural gas supply....
  • Comes with 1/2" Male Flare to 3/8" Female Flare Brass fittings, to convert your 3/8" connector propane/natural gas grill.
  • Perfect for hooking up weber grill, fire pit, patio heater, pizza oven and portable generator.
  • 24-foot durable rubber hose, flexible enough to move your gas device as needed. Quick disconnect feature allow to swiftly disconnect hose.
  • Supplies up to 100K BTU/Hr, provide adequate gas flow for 30-in and larger grills.
Check Stock

4LIFETIMELINES Fitting Assortment 1/4 Tube Nut Union Adapter 8 SKU

  • Contains 8 SKU, fast moving 1/4" fittings to keep on hand when working with automotive hydraulic braking systems.
  • Fitting Assortments are designed for specialty and general repair shops. Each assortment contains a specific collection of fast-moving brake line fittings that should be kept on hand when working with automotive hydraulic braking systems..
  • Assortments are packaged in shatter-resistant, see-through plastic trays. Locator labels on the inside lid make locating, selecting, and re-filling brake fittings quick and easy..
  • Compatible with steel, copper nickel, copper coated steel, PVF-coated, and stainless steel brake lines.
  • Lifetime warranty included on all products purchased from 4Lifetimelines.
Check Stock

iCrimp CRQ01 Disconnect Tong Sized 1/2 inch, 3/4 inch, 1 inch, Removal Tool used for Demount Brass Push Fit, Push-to-Connect Fittings

  • CRQ01 Push-Fit fitting disconnect tool has 3 teeth available in 1/2 in., 3/4 in. and 1 in. sizes, allows for easy removal of brass push-to-connect fitting from pipe.
  • CRQ01 disconnect tong is the easiest way to disconnect brass Push to Connect fittings in hard to reach places where it can be tough to get leverage on the release collar.
  • Compact design with wide grip handles. One-handed operation. Quick and easy disassembly.
  • To use the disconnect tong, slide the tong over the fitting and the pipe. Squeeze the tong to press the fittings collar and pull the pipe from the fitting. Easier to use in tight situations.
  • The disconnect tool depresses the release collar using the force applied by your hand to allow the teeth of the fitting to release and the fitting to be removed, reducing the risk of installation errors.
Check Stock

1/2\ Ag Hydraulic Quick Connect Tractor Couplers with Dust Caps,Poppet Pioneer Style ISO 5675 Hydraulic Quick Coupler

  • 2 sets Ag hydraulic quick connect tractor couplers,easy to connect and disconnect,with hydraulic coupler dust caps.
  • Body Size: 1/2″ Body,Thread Size: 1/2″ NPT Thread, Poppet Valve.
  • The Ag hydraulic couplers interchange with all ISO 5675 series including ball seat valve, push-pull couplings, poppet seal and ISO 7241.
  • Most common quick connect couplers used in the agriculture, construction and logging industries.
  • Made by harden steel construction for superior corrosion resistance.
Check Stock

Universal 1/8'' NPT Male Thread to 8MM Female Quick-Disconnect Connector Adapter, Black Zinc Plated Copper, PCP Paintball Charging Fittings with Sealing O-Ring

  • Material - Made of high-quality black zinc plated copper, Size: 31mm / 1.22 inch Length, Rated to 4000 PSI, Max Pressure: 6000 PSI, Temperature Resistance: 1000 ℃..
  • Accuracy - NC machining, accurately, suitable for 8mm Female converter and 1/8" NPT female thread, supplied with sealing ring washer, reliable and no leakage..
  • Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, high pressure resistance，this is one of the needed items to have in your parts kit..
  • Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air in a big bottle to a smaller more portable bottle, or connect to air tanks when used with two fill adapters..
  • Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA tanks filling etc..
Check Stock

Draft Brewer New 5 Gallon Stainless Steel Ball Lock Keg

  • 【MFL QUICK DISCONNECT】MRbrew threaded beer cornelius keg ball lock disconnect fittings come with MFL swivel nuts, make hose changing and extra equipment adding a breeze, allow more options of extra functions and possibilities for your kegging system!.
  • 【BUY ACCESSORIES SEPARATELY? NO!】MRbrew ball lock fittings comes with complete sealing and hose connection parts, 5/16” barb for connecting gray disconnect to gas hose, 1/4” barb for connecting black disconnect to liquid hose, clamps guarantee no leak on connection!.
  • 【YOUR LONG-LASTING USE CHOICE】MRbrew ball lock fitting set is made of stable PBT material, it has strong oil resistance, its smooth surface makes cleaning easy. Stainless steel has strong corrosion resistance, not easy to get rust. MRbrew makes your beer brewing more economy!.
  • 【POWERFUL APPLICATION KIT YOU NEED】MRbrew ball lock keg fitting is perfect for most Cornelius Keg, Pepsi Keg and 7-UP tanks, also can be a home brewing adapter of Corny & Keg coupler, suitable for beer, soda, and other beverages dispensing!.
  • 【100% LIFELONG ISSUES SOLVING FOR YOU】Each MRbrew ball lock keg fitting set is backed by unbeatable, reliable, trusted product quality, we will unconditionally solve your problems if you are not satisfied!.
Check Stock

only fire 12 Ft 3/4' ID Natural Gas Hose with Quick Connect/Disconnect Fittings for Grill,Generator,Patio Heater,Pizza Oven,etc

  • Hose Connection: 3/4" Male quick discount plug x 3/4" Male pipe swivel.
  • Quick Connector: 3/4" quick connect x 3/4" Female pipe thread.
  • 12FT gas hose , outside 100% solid brass and rubber fittings, long-lasting and sturdy. Provides secure, tight connection between grill or fire pit and tank.
  • Functions effectively with natural or liquid propane gas. Unites LP grills, natural gas grills and RVs to permanent fuel sources.
  • Use for high BTU output outdoor cooking appliances, construction heaters, and standby generators.
  • The male quick disconnect plug fits into quick disconnect adapter (3/4" quick connect x 3/4" female pipe thread). Automatically shut off the flow when pipe is removed, via the Quick disconnect adapter.
Check Stock

M MINGLE Ultimate Pressure Washer Adapter Set, Quick Disconnect Kit, M22 Swivel to 3/8 Inch Quick Connect, 3/4 Inch to Quick Release, 8-Pack

  • ATTENTION: M22 14 mm swivel fitting has 14 mm inside diameter, NOT 15mm. NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz. If washer needs 15 mm, may cause leakage..
  • 8-pack universal Pressure Washer Adapter Set, 4 kinds of couplers includes: Metric M22-14 swivel female + 3/8’’ plug, 3/8’’ quick disconnect + M22 male, 3/4’’ female + 1/2’’ quick connect, 1/2’’ plug+ 3/4’’ male..
  • Two Quick Connector Sets connect water outlet of pump to pressure washer hose or connect pressure washer hose to gun. The other two Quick Connect Kits converts 3/4’’ threads to quick release fittings, connecting all 3/4" standard garden hose to water inlet of power washer pump..
  • High replacement couplers provide secure and quick fittings, easy to connect and disconnect. Max. Pressure is up to 5000 PSI..
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

FEL-PRO ES 70599 Fuel Injector O-ring Set

  • Durable Material: Made of heavy plastic, durable, resistant to fuel and solvents, light weight, small size, easy to grip, spring-loaded design, long life..
  • Function: The Oil Cooler Line Quick Disconnect Kit provides 7 different sized tools for removing/disconnecting the fuel line, heater line, AC cooling line and other accessories on the quick disconnect fittings..
  • SIMPLE HANDLING: Compact size for easy grip and access to hard-to-reach lines. Hold the notch of the tool against the wire and open the clamp with a push. Then you can plug the line into the tool and disconnect it. (Please check the outer diameter of the fuel/oil/air conditioning piping before use.).
  • What You Get: Transmission Line Removal Tool Set Contains 7 Opening Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"..
  • Wide applicability: 7 sizes of disconnect tools for a variety of fuel lines and other quick disconnects. If you have any questions about this product, please keep in touch with us in time..
Check Stock

OTC 6080 Fuel Injection Test Kit for Master Cummins Diesel Engine

  • Includes the fittings and gauge needed to check fuel pressure fuel volume and fuel restrictions from the delivery pump to the injection pump.
  • Kit includes special quick-disconnect banjo fitting two fuel injection quick-coupler adapters quick-disconnect banjo fitting gauge assembly and fuel volume test adapter.
  • Also includes a diesel fuel inlet restriction test adapter for 1988-98 Dodge pickups and vans with 5.9L 12-valve and 1998-1/2-newer 5.9L 24-valve Cummins diesel engines.
Check Stock

3/8\ Ag ISO 5675 Hydraulic Quick Connect Couplers with Dust Caps,Pioneer Style Hydraulic Coupler,3/8” NPT Thread and 3/8” ISO Body

  • 2 sets 3/8" Ag hydraulic quick connect couplers,easy to connect and disconnect,with hydraulic coupler dust caps.
  • Body Size: 3/8″ ISO,Thread Size: 3/8″ NPT Thread, Poppet Valve.
  • The Ag hydraulic couplers interchange with all ISO 5675 series including ball seat valve, push-pull couplings, poppet seal.
  • Most common quick connect couplers used in the agriculture, construction and logging industries.
  • Made by harden steel construction for superior corrosion resistance,with 4,000 PSI Rating,6 GPM NORMAL Flow,12.15 GPM Max Flow.
Check Stock

Uniweld UEK1 Hydraulic Swage Tool Kit

  • Kit includes: 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1-1/8″ O.D. Expander Heads, Inside/Outside Deburring Tool and Carrying Case with Storage Compartments..
  • Hydraulic power to easily make precision swages from 3/8″ to 1-5/8″ O.D. on soft tubing including copper, brass, aluminum and steel. Expander Heads 1-3/8″ and 1-5/8″ O.D. Sold Separately..
  • Compact pistol grip design able to work in tight spaces and the hydraulic lever mechanism and release button allow for quick and easy one-handed swage..
  • All tubing must be soft or fully annealed to prevent cracking, see product video on how to properly anneal tubing..
  • Save time and money by eliminating fittings, soldering joints, re-round deformed tubes and fittings for precision fit..
Check Stock