Top Hydraulic Stay

Morinbo Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install (Pack of 1)

  • STURDY LID STAY WITH SOFT CLOSE Excellent safety solution for toy box lid and kitchen cabinets, your lids will lower slowly and gently to avoid smashing fingers. and per lid-stay support the range of door weight 3-10 lbs, Height 18-19 inch..
  • EASY TO INSTALL Comes with an exclusive original design installation card, combined with the most detailed installation video of the entire network on this page, allows you to easily complete the hinge installation..
  • LID STAY SLOW CLOSING Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • COMPACT DESIGN OF LID STAY HINGE The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree..
  • KEEP LID HINGE STAY OPENING & WIDE USAGE Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right..
Check Stock

Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors (Pack of 2)

  • LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs).
  • COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees.
  • 2-WAY INSTALLATION – Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting..
  • ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video..
Check Stock

Douper Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors (Pack of 1)

  • LID STAY SLOW CLOSING - Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers..
  • CONDITIONS OF USE - Per lid stay hinge can support the range of door weight 3-10 lbs, Door Height Range18-19 inch. Weight support will be doubled by using 2 lid supports (6lbs-20lbs).
  • COMPACT DESIGN OF LID STAY HINGE - The compact design allows for installation in tight fit areas. Douper lid hinge supports opening the lid at a maximum angle of 105 degrees.
  • 2-WAY INSTALLATION – Douper hinges can be installed on Top opening or Upward opening doors. Each lid hinge can be used for right or left hand mounting..
  • ONLY TAKES 10 MINUTES TO COMPLETE THE INSTALLATION by following the install placement measurement card and installation video..
Check Stock

Simpleout Electric Hydraulic Jack Kit - 4 in 1 Car Floor Jack Stands Set 3 & 5 Ton Auto Vehicle Air Trailer Truck Jack Roadside Emergency Tire Repair Kit with Built-in Inflator

  • ... to use the electric jack on a flat and firm ground ③The scissor jack must be placed in the direction parallel to the car ④Please stay away from the car when the floor jack is working ⑤Do not use this car lift to lift trucks and large SUVs over 5 tons. .
  • 【POWERFUL HYDRAULIC CAR JACK】-This electric hydraulic floor jack has been upgraded with a powerful motor of an all-copper movement, which will achieve low power consumption and energy saving work easily with quick and stable performance. It is a better choice than any types of scissor jacks, if your budget allows..
  • 【QUICK Built-in TIRE INFLATOR】-This auto car jack kit is equipped with a built-in tire inflator to infalte a tire quickly. How to use it? Step 1 :Connect the power. Step 2: Attach the air inflation tube to the nozzle and tighten the nozzle nut. Step 3: Press the inflation button to inflate and check the display, restore to the middle "O" button to stop inflating..
  • 【4 IN 1 KIT】-The electric hydraulic jack kit includes a car jack with built-in inflator and other accessories. This automatic car jack 4 in 1 kit, not only serves jacking an....
Check Stock

Hein-Werner HW93291 Blue Premium Hydraulic Jack Oil - 1 Quart

  • Bio-Bottle Jack hydraulic fluid is a biobased, biodegradable and environmentally non-toxic hydraulic oil for use in general purpose hydraulic systems.
  • Specially designed to be a direct replacement for petroleum oil based hydraulic fluids in mobile and stationary hydraulic vane, piston and gear type pumps.
  • This patented technology provides superior oxidation stability and longer fluid life compared to other vegetable based hydraulic oils.
  • It meets or exceeds the requirements for type I, II and III hydraulic tools.
  • Bio-Bottle Jack hydraulic fluid is ultimately biodegradable1 vegetable based formula.
Check Stock

Pruvade Dental Full Chair Covers - 29 x 80 |Box of 125| Disposable Clear Plastic Sleeve Protectors Waterproof Plastic Cover Sleeves for Dental Chair Seat Headrest Tattoo Chair and Hydraulic Bed

  • ...id resistant chair covers are easy to place on the chair and remove. They can be mounted to the top of your chair back. These stay firmly in place and prolongs the service life of the chair..
  • MULTIPLE APPLICATIONS: These waterproof full chair covers are designed to cover the entire chair. Perfect for a dental chair, hydraulic bed, spa chair and tattoo chair!.
Check Stock

Pruvade Disposable Dental Headrest Covers 14 x 10 | Pack of 250 | X-Large Clear Plastic Headrest Cover for Tattoo Piercing and Dental Chairs Professional Waterproof Clear Sleeves for Headrests

  • ...luid resistant chair covers are easy to place on the chair and remove. They can be mounted to the top of your chair back. These stay firmly in place and prolongs the service life of the chair..
  • MULTIPLE APPLICATIONS: These waterproof Headrest Covers are designed to cover the entire chair. Perfect for a dental chair, hydraulic bed, spa chair and tattoo chair!.
Check Stock

VEPURLT Air Hydraulic Pump 10,000PSI, Air Hydraulic Foot Pump 1/2 Gal Reservoir, Air Foot Pedal Hydraulic Pump with Hose for Hydraulic Bead Breaker

  • 【Basic Info】 -The hydraulic foot pump has a maximum working pressure of 10,000 PSI, used for all 10-ton applications. Action: Single Acting, Flow Rate: 0.85 liters / 0.22 gallons per minute, Air Connection: 1/4" NPT, Output Oil Hole: 3/8" NPT, Hydraulic Oil Type: AW-32, Oil Capacity: 98 Cubic. Connector Type: 3/8" NPT quick hydraulic coupler with dust cap.
  • 【Trustworthy Security】-The air hydraulic foot pump is built-in internal relief valve, which protects the hydraulic components regardless of hydraulic pressure. The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock.
  • 【Powerful Energy】-This air powered hydraulic pump is an ideal all-around power source, for use with a variety of rams, presses, & hydraulic pullers, that develops 10,000 PSI hydraulic pressure at 100 PSI air pressure.
  • 【Matching Accessories】-Equipped with a 4ft high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer. The oil port is made of cast steel, durable and reliable. A spray gun is included to control the input and interru....
Check Stock

CNC Mountain Bike V Brake Set, Bicycle V Brake for Front/Rear，1Pair

  • 【Braking System】：Two hydraulic bike brake pads clamp the disc rotor to brake, the rotor will not move while ensures great performance. One-way hydraulic brakes for mountain bike system is to brake by pushing aside the rotor which is easy to make the rotor deformed..
  • 【Adjust Tightness】: Front /Rear bicycle hydraulic disc brake caliper are made of premium aluminum material with oil cylinder driven two -way brake pad clamp . MTB hydraulic disc brakes with internal fine-tuning screws can be used to adjust the tightness of the brake inner wire to achieve the desired bicycle hydraulic brake feel..
  • 【Upgrade Design】: HB-100 hydraulic bike brakes uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the bicycle disc brake kit conversion of the hydraulic clamp. The cylinder of the clamp is built-in brake oil..
  • 【Application Bikes】: Lining Pulled Hydraulic Disc Brake Suitable for mountain E-Bike,bikes, road bikes and folding bikes, MTB, scooter, fat bike..
  • 【Note】: Hydraulic disc brake adapter. Please do not remove the yellow pad before installation, and pinch the brake lever, otherwise it will cause oil leakage or sc....
Check Stock

BESTOOL Air Hydraulic Pump - 10,000 PSI Hydraulic Foot Pump Pressure 1/2 Gal Air Over Hydraulic Pump (Single Acting) Green - with Hose

  • BESTOOL Air actuated hydraulic treadle pump internal pressure relief valve for overload protection, prevent oil leakage.The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Air powered hydraulic pumps maximum adjustable pressure: 10,000PSI, used for all 10-ton applications.Output oil 98 cubic inches/1.6 liters Fuel tank.Connector Type: 3/8" NPT quick hydraulic coupler with dust cap..
  • This hydraulic ram pump features a high-quality aviation aluminum pump core and with a more durable aluminum reservoir.Hydraulic air pump is equipped with a 6.5 ft / 2 m high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer..
  • The air over hydraulic pump adopts a humanized pedal motion design, which is easy to control and operate, save time and effort and has strong power, pressure adjustable.Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • This air hydraulic foot pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single acting ram applications..
Check Stock

Neiko 50463A Grease Fitting Assortment | 110 Piece | SAE | Straight and Angled Zerk Kit | A3 Steel | for Angled Grease Guns, Bearing Housings, Mechanical Component Lubrication

  • [APPLICATION]: Grease fittings, sometimes known as Zerks or grease nipples, are small hydraulic check valves used on bearings and similar mechanical assemblies to supply lubricant to internal working parts..
  • [HYDRAULIC GREASING]: These grease zerks feed lubricant into a bearing instead of having to disassemble parts to apply the lubricant, which makes for effective work efficiency when using a grease gun..
  • [COMPATIBILITY]: This assortment kit is perfect for use on cars or vehicles and solves OEM incompatibility issues with straight, 90-degree and 45-degree angled fittings to allow a pressure-resistant connection..
  • [CONVENIENT]: The plastic storage case contains each SAE grease zerk fitting in the kit in different compartments with an organization chart to neatly stay organized in your tool collection..
  • [INCLUDES]: Sizes - 30 straight 1/4-28, 20 straight 1/8" pipe grease, 15 45-degree, 1/4-28 and 15 90-degree 1/4-28 for angled grease guns and more..
Check Stock

BESTOOL Air Hydraulic Pump - 10,000 PSI Hydraulic Foot Pump Pressure 1/2 Gal Reservoir Air Treadle Actuated Hydraulic Pump for Rams, Presses, Hydraulic Pullers(Single Acting) Orange - with Hose

  • BESTOOL Air actuated hydraulic treadle pump internal pressure relief valve for overload protection, prevent oil leakage.The convenient 2-stage release mechanism gives fast or metered ram return while reducing hydraulic shock..
  • Air powered hydraulic pumps maximum adjustable pressure: 10,000PSI, used for all 10-ton applications.Output oil 98 cubic inches/1.6 liters Fuel tank.Connector Type: 3/8" NPT quick hydraulic coupler with dust cap..
  • This hydraulic ram pump features a high-quality aviation aluminum pump core and with a more durable aluminum reservoir.Hydraulic air pump is equipped with a 6.5 ft / 2 m high-pressure oil pipe that features double protection of embedded steel wires and thickened outer layer..
  • The air over hydraulic pump adopts a humanized pedal motion design, which is easy to control and operate, save time and effort and has strong power, pressure adjustable.Built-in internal relief valve protects the hydraulic components regardless of hydraulic pressure..
  • This air hydraulic foot pump is designed to be used with single-acting cylinders only, efficiently operates many industrial and construction single acting ram applications..
Check Stock