Top Hydraulic System Leak Sealant

High Pressure 3/16\ Threaded Outdoor Anti-drip Fogging Spray Head Misting System Nozzle, Orifice 0.3mm 10-Pack

  • High Quality Material: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water.
  • Wide Usage: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, outdoor cooling system, agriculture irrigation system, etc..
  • Dimension: Thread size is UNC 10-24, Orifice diameter is 0.4mm.
  • Easy to Install: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening.
  • Leak-proof, self-sealing o-ring included with each brass nozzle.
Check Stock

Liquid Rubber NeoPond Waterproof Pond Sealant - Fish and Plant Safe Waterproofing Membrane Sealer for Ponds and Water Features Black 1 Gallon

  • LEAKY POND OR WATER FEATURE - Ponds will eventually spring a leak. Whether it’s Concrete, EPDM or Wood Liquid Rubber NeoPond Sealant is a liquid....
  • FLEXIBLE HEAVY-DUTY COATING - UV stable and easy application of a waterproofing sealant for a fully submersible water feature or pond, fish and plant....
  • ENVIRONMENTALLY FRIENDLY - Liquid Rubber NeoPond Sealant is water based, containing no Solvents and ultra-low VOC's.
  • EASY TO APPLY - Basically just like painting except you use heavy coats to build up your waterproof membrane.
Check Stock

Insta-Seal Replacement for Nu Calgon 4050-08 EasySeal Direct Inject

  • Insta-Seal Direct Inject for 1-1/2 Ton Systems , Mini Splits and Automotive.
  • Concentrated formula means less material in system, Clear tube so you can see the sealant go in. Perfect for split systems, heat pumps, microchannel coils, packaged units, and mini splits. Designed for one time use..
  • Optional Direct Inject Tool Sold Separately [IMAGES SHOWN ARE FOR REPRESENTATION ONLY].
  • Before you have your coil condemned and spend thousands replacing your system...Watch our video to see how easy InstaSeal Direct Inject is to use!.
  • Replaces / Supersedes: Xantus XL4 20-105 , Super Seal Flex Inject # 985 , Nu-Calgon EasySeal Direct Inject # 4050-05 , Replaces A/C Leak Freeze & A/C Leak Freeze with Magic Frost , Enviro-Safe Direct Inject , Sensible , Nu-Calgon 4050-05 , 405005 , Xantus Products , Vapco Express Seal and more..
Check Stock

Permatex 80632 Thread Sealant with PTFE, 4 oz. , White

  • Economical general-purpose fitting sealant.
  • Seals and resists pressure in air, oil, diesel fuel and hydraulic systems.
  • Remains pliable at higher and lower temperatures.
  • Suggested Applications: Air conditioning fittings, temperature sending fittings, hydraulic fittings.
Check Stock

BESTOOL Hydraulic Welded Bottle Jack, 20 Ton (40,000 lb) Capacity, Hydraulic Jack with Anti-Leakage Design Structure, Black

  • Bottle jack 20 ton engineered using a drop forged alloyed steel construction for quality and durability.
  • Inner/outer welded structure delivers leak-free performance and has a longer operation life and an overall stronger build compared with traditional screw jacks.
  • BESTOOL jack is tested for safety. Built-in oil-bypass and secure valve will automatically protect jack hydraulic system when overload.Keep Red bottle jacks from being damaged and keep you safe..
  • Features a lifting range of 9-7/16" to 17-5/8" with a 20 ton (40,000 lb) capacity.
  • Has a lifting height of 5-7/8" and an adjustable screw top extension that adds an additional height of 2-3/8".
  • Glide-action pressure pump is designed to lift with minimal effort.
  • Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits,Car jack surface paint is oil-proof and anti-corrosion.Easy to clean.
  • Hydraulic bottle jack designed for residential and commercial use that can be widely used for sedans, suv, travel trailer, station wagon, mini bus.
  • Serrated, heat treated saddle provides generous lifting area and secure grip.
Check Stock

Bar's Leaks Standard Works on All Engine Oil, Transmission, Power Steering, Hydraulic & Differential & Gear, Grey, 4 Pack

  • Works on ALL Engine Oil, Transmission, Power Steering, Hydraulic & Differential & Gear.
  • Bar's Leaks Super Leak Fix is formulated to work in multiple systems including Engine Oil, Transmission, Power Steering, Hydraulic and Differential & Gear..
Check Stock

New 12V Hydraulic Pump /Hydraulic power unit/Electric dump trailer power unit (Double Acting 6 Quart )

  • CE certification to ensure you can use it safely..
  • It consists of high pressure gear pump, DC motor, multi-purpose integrated block, various function valves, oil tank and other components. It is widely used as the power resource for lifting and pushing device..
  • This hydraulic power unit is used as a fuel supply device,also it is the perfect replacement pump for 12V DC remotely controlled hydraulic systems.
  • through external pipe system connected to a number of hydraulic cylinder to control multiple sets of valve movement..
  • The motor is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions.Its high quality starter ensure long life and a fast starting each time..
  • Widely used in dump trailers, dump trucks, RVs, lifts, elevator doors, trailers, wreckers, car carriers, agricultural equipment etc..
Check Stock

Leak Saver - Leak Shot Refrigerant Grade CO2 Refill Cartridges 8 Pack - Refill for The Leak Shot HVAC Kit Sold Separately - for A/C & Refrigeration Systems Up to 5 Tons - USA Made

  • REFILL YOUR LEAK SHOT HVAC: This 8 pack of high-pressure refrigerant grade CO2 was made for our Leak Shot HVAC (sold separately), a leak saver/line....
  • SPECIALLY MADE CO2 CARTRIDGES: Won’t contaminate your system as you unclog condensate drain lines and seal up leaks in A/C & Refrigeration systems....
  • PATCH PESKY LEAKS, TOO: The Leak Shot HVAC itself works in tandem with the Leak Saver Direct Inject (refrigerant leak sealant) which is sold....
  • MADE BY HVAC PROFESSIONALS: And used by them, you can be confident that these cartridges are compatible with A/C and refrigeration systems up to 5....
  • 100% SATISFACTION GUARANTEE: If for any reason you’re unsatisfied with your results, contact us for another try, on us (must be installed by....
Check Stock

Burndy Y1MRTC Hytool Ratchet Crimper, Copper Hydent Terminals, Splices, and Thin-Wall C-Taps, 0.73' Width, 9-7/8' Length

  • 【Hydraulic Power Driven System 】Different with similar hand tool that relies on leverage and hand power, our hydraulic copper tube fittings crimping tool is designed with hydraulic cylinder which is labor-saving. One person is totally enough to finish leak-free connections..
  • 【Changeable Crimping Jaws 1/2", 3/4", 1"】 With a ball bearing springs inside the head, just simply slide in and out to change the crimping dies of different size to meet your various demand and make it the fastest solution for pipe maintenance and repair..
  • 【360° Rotating Head】The rotating head makes the copper plumbing easier in some locations especially for Tee fittings..
Check Stock

Shake It Baby (DJD Presents The Hydraulic Dogs) [Junior Jack Remix]

  • Hydraulic bottle jack designed for residential and commercial use.
  • Serrated, heat treated saddle provides generous lifting area and secure grip.
  • Features a lifting range of 9-7/16" to 17-5/8" with a 20 ton (40,000 lb) capacity.
  • Adjustable screw top extension adds versatility.
  • Engineered using a drop forged alloyed steel construction for quality and durability.
  • Inner/outer welded structure delivers leak-free performance.
  • Glide-action pressure pump is designed to lift with minimal effort.
  • Integrated built-in oil-bypass and overload valve that protects the hydraulic system from extending beyond limits.
  • Meets ASME PASE safety standards and includes a limited 1 year manufacturer warranty.
Check Stock

Tranz-X Kitsuma Dropper Post w/External Routing (31.6/125mm, No Lever)

  • HIGH-STRENGTH ALUMINUM ALLOY: High-Strength Aluminum Alloy Material, High Hardness, Dropper Seatpost Strong And Durable..
  • HYDRAULIC SYSTEM: Mtb Dropper Post Can Be Locked At Any Position, More Comfortable Riding..
  • DOUBLE SCREW REAR DRIFT DESIGN: Bike The Seat Post Adopts Double Screw Rear Drift Design, Both Screws Use 10.9-Level Torque, And The Screw Locking Is More Stable..
  • SEALING DESIGN: Dropper Post Sealing Ring Design, Rainproof And Dustproof, Protect The Seat Tube.Will Not Leak Oil..
  • BOTTOM DISPLAY: The Bottom Fine-Tuning Screws Are All Adjusted At The Factory And Do Not Need To Be Adjusted.Hydraulic Lift Seatpost..
Check Stock

20 Pack Brass Misting Nozzles Replacement Heads, Low Pressure Atomizing Misting Sprayer for Patio Lawn, Landscaping, Dust Control, Outdoor Cooling Mister System, 0.012"(0.3mm) Orifice, 10/24 UNC

  • High Quality Material: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water.
  • Wide Usage: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, outdoor cooling system, agriculture irrigation system, etc..
  • Dimension: Thread size is UNC 10-24, Orifice diameter is 0.3mm.
  • Easy to Install: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening.
  • Leak-proof, self-sealing o-ring included with each brass nozzle.
Check Stock