Top Hydraulic Tensioned Nuts

OTC 7463 Fully Adjustable Gland Nut Wrench

  • Fully adjustable Gland Nut Wrench fits hydraulic cylinders on vehicles having gland nuts from 1 inch to 3-3/4 inches in diameter.
  • Reverses to work on either 7/32 or 1/4 inch pinholes.
  • Designed for use with a 1/2 inch drive ratchet or breaker bar.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

Eaton Aeroquip 2021-4-6S Male Connectory Male 37-Degree JIC Male Pipe Thread JIC 37° and NPT End Types Carbon Steel 1/4 NPT m x 9/16 JIC m End Size 3/8 Tube OD Pack of 10

  • Tube fitting flare body for use with Eaton Aeroquip tube sleeves and 1290 flare nuts in hydraulic applications.
  • Male 1/4-18 NPT threads on one end and male 9/16-18 JIC threads on the other for use with 3/8" OD tubes.
  • Zinc-plated steel for strength, durability, and resistance to corrosion.
  • Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings.
Check Stock

EATON Aeroquip 2240-6-8S Male Bulkhead Connector Male 37 Degree JIC Male Pipe Thread JIC 37° & NPT End Types Carbon Steel 3/4 JIC m x 3/8 NPT m End Size 1/2 Tube OD

  • Bulkhead pipe and tube fitting flare body for use with Eaton Aeroquip tube sleeves and 1290 flare nuts for connecting pipes to tubes through a container wall in hydraulic applications.
  • Male 3/8-18 NPT threads on one end and male 3/4-16 JIC threads on the other for use with 1/2" OD tubes.
  • Zinc-plated steel for strength, durability, and resistance to corrosion.
  • Meets MIL-SPEC MIL-F-18866 and SAE J514 standards for hydraulic tube fittings.
Check Stock

Rotary 14907 PK3 Mower Blades

  • ✅ RT1 = .375 inch Dia., RT2 = .75 inch Dia., RT2L = .75inch Dia., RT4 = 40mm, RT5 = 50mm..
  • ✅ Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT2 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the RT2..
  • ✅ The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • ✅ The gland files are specifically designed for hydraulic cylinder glands and resurfacing seal areas.
  • restores snap ring grooves, keyways, grooves, glands, and square threads inside and outside.
  • ✅ SATISFACTION GUARANTEED: We at Rotary Thread stand behind our products and invest in product quality. Our US-based friendly customer service team is here for you and happy to help answer any questions you may have.
Check Stock

Niteguy Side Post Battery Terminal Bolt Compatible with GM and Other Accessories to Battery,Standard Side Post Battery Terminal 3/8 16 Stud Extender Extension (2 Pack)

  • √Package--2 Pack Standard Stud thread 3/8-16, thread sizes and thread pitches of any kind can be used..
  • √Fitment--Excellent for trailer brake controls and other accessories requiring direct power,maintenance free connection..
  • √ Function--Direct to battery power circuits help reduce noise in stereo, communication and other electronic equipment..
  • √Material--Solid brass construction,optimise tensioned thread geometry .Dimensions similar to standard hexagonal nuts..
  • √Quality Guarantee: If you have any problems with it ,please feel free to contact us and i will try my best to solve your problems as soon as possible until you are satisfied. We are highly confident with our products.you won't regret it if you got it!.
Check Stock

2-Pack Trailer Brake Backing Plates 10 in. (2LH 2RH) w/4 Hub/Drum Kit (5 on 4.5)

  • Pair of 10" x 2 1/4" free backing hydraulic brake assemblies with parts.
  • Contains 1 left and 1 right brake assembly.
  • Comes with mounting bolts, nuts, and lock washers.
Check Stock

VIS Copper Flare Gasket, 45 Degree Flared Fitting, Fit 3/8\ Tube OD (Pack of 10)

  • All washers are copper construction, perfect for metal-to-metal seal..
  • Forged nuts for refrigeration applications, fit 3/8" O.D. tube.
  • Gaskets use with chopper, brass, aluminum and welded steel hydraulic tubing that can be 45-degree flared.
  • Functional requirements of sea J512 & sea J513.
Check Stock

OTC 1266 Fully Adjustable Gland Nut Wrench for Farm and Construction Equipment

  • Fully adjustable, 2 to 6 inch (pin to pin) capacity, Gland Nut Wrench fits hydraulic cylinder gland nuts on most farm and construction equipment.
  • Reversible pins are sized at 1/4 inch and 5/16 inch to accommodate most applications.
  • Designed for use with a 3/4 inch drive ratchet or breaker bar, this tool can take the torque you dish out.
  • High-grade materials ensure quality performance over the lifetime of the tool.
  • Replacement pins (No. 204928) are available separately.
Check Stock

KARSSIT Electric Car Jack kit 5 ton 12V Car Jack Hydraulic with Impact Wrench Portable Hydraulic Floor Jack 2 in 1 kit

  • 【5T Cars Changing Tire】This Electric Hydraulic Jack suitable for vehicles under 5T (11,000 lbs) for tire changing. Equipped with powerful electric motor, it takes less then 2 minutes to lift the cars. The Lifting height range: 6.1-17.7 inch(155mm-450mm). Non-slip cross groove design. It Matches nearly all the vehicles that less than 5 ton like cars, SUV, sedan,pick up,truck. It is a good helper when you need change tire not only in roadside emergencies but also at home garage repairing..
  • 【2 in 1 Kit】This hydraulic jack is a two-in-one set with 1pc 5T electric hydraulic jack & 1pc electric impact wrench,including 1pc safety hammer/1pc 3.5m power cable/1pc battery clamp jumper cable/2 spare fuses/1 pair of gloves/2pc user manual/1pc tool case etc.The electric impact wrench is DC 12V ,Rated power 80w,Max Torque 480N/M,equipped with two sockets (17/19 mm & 21/23 mm), to matching more vehicles with different size of lug nuts in the market..
  • 【Easy to Use Necessity in car trunk】Only has a vertical lift control switch makes the panel easily understand and operate. Car jack 5 ton will automatically stop lifting after reaching the height limit.self-locking....
Check Stock

OEMTOOLS 25556 Flywheel Turner, Flexplate Tool, Flywheel Wrench, Sure Grip Flywheel Turning Tool, Flywheels Specialty Tools, Engine Rotating Tool

  • SIMPLE REMOVAL TOOL: Our flywheel locking tool grabs the teeth of your flywheel or flexplate providing torque to quickly remove or install the car flywheel or flexplate.
  • Our turner helps you apply proper torque to nuts during flywheel installation.
  • COMPLETE ENGINE ACCESS: Sometimes it takes a specialty tool to get all of your engine work done efficiently.
  • This flywheel removal tool will remove flexplates and flywheels so that you can service clutches, transmission, and rotate the crackshaft.
  • FLYWHEEL HOLDER: Removing your flywheel bolt or torquing the harmonic balancer bolts can be a nightmare without a flywheel key.
  • Lock your car’s flywheel sprocket or flexplate in position to get adequate nut torque for removal and installation jobs.
  • COMFORTABLE FLYWHEEL PULLER: Working beneath your vehicle is uncomfortable.
  • Let this flywheel turning wrench’s sure grip handle keep you locked on the flywheel teeth without hand slippage during torquing.
  • This flywheel tool folds for easy storage.
  • SPECIALTY WORKING TOOL: Other tools can’t handle the pressure of removing your flywheel.
  • Our spring tensioned flywheel remover keeps your flywheel turning wrench securely engaged while torquing the harmonic and car flywheel bolts.
Check Stock

KARSSIT 5 ton Electric car Jack kit with Impact Wrench 12V Hydraulic Car Jack for SUV MPV Sedans Truck 2in1 car toos

  • 【5T Cars Changing Tire】:This Electric Hydraulic Jack suitable for vehicles under 5T (11,000 lbs) for tire changing. Equipped with powerful electric motor, it takes less then 2 minutes to lift the cars. The Lifting height range: 6.1-20.86 inch(155mm-530mm). Non-slip cross groove design. It Matches nearly all the vehicles that less than 5 ton like cars, SUV, sedan,pick up,truck. It is a good helper when you need change tire not only in roadside emergencies but also at home garage repairing..
  • 【2 in 1 Kit】：This hydraulic jack is a two-in-one set with 1pc 5T electric hydraulic jack & 1pc electric impact wrench,including 1pc 530mm head for car,1pc safety hammer/1pc 3.5m power cable/1pc battery clamp jumper cable/2 spare fuses/1 pair of gloves/2pc user manual/1pc tool case etc.The electric impact wrench is DC 12V ,Rated power 80w,Max Torque 480N/M,equipped with two sockets (17/19 mm & 21/23 mm), to matching more vehicles with different size of lug nuts in the market..
  • 【Easy to Use Necessity in car trunk】Only has a vertical lift control switch makes the panel easily understand and operate. Car jack 5 ton will automatically stop lifting after reaching the height limit.self-locking function to protect car not fallen-down during use if cut-off power....
Check Stock

Hydraulic Valve 2 Spool, Hydraulic Directional Control Valve, 11GPM Hydraulic Joystick Control Valve for Tractors Loaders, Double Acting Cylinder Spool

  • Hydraulic directional control valve comes with 2 spool and #8 BSPP in/out ports, and the 2 spool hydraulic joystick fits for small tractors, tractors loaders, log splitters, and so on..
  • Hydraulic control valve 2 spool for operating double acting cylinders. Durable cast iron construction provides long-term usage..
  • The hydraulic valve 2 spool, hydraulic control valve for tractor loader, all spools standard come with spring return, which can return to the neutral position..
  • The hydraulic spool control valve's relief valve range is up to 3600 PSI and the maximum flow is up to 11 GPM. The hydraulic valve 2 spool replacement for hydraulic control valve 2 spool, hydraulic directional control valve, hydraulic spool control valve, joystick hydraulic valve, 2 spool hydraulic joystick, hydraulic control valve for tractor loader, hydraulic joystick control, hydraulic loader valve joystick, hydraulic loader control valve joystick..
  • You will get 1pcs 2 spool hydraulic control valve. We provide the best after-sales service, if you have any questions, please feel free to contact us, we are happy to serve you..
Check Stock