Top Hyken Chair 2348cylinder

MySit 2.2" Stroke Office Chair Gas Lift Cylinder Replacement, Heavy Duty 450lbs Shortest Gas Spring Rod Chair Part Sinking 1.2 inches Universal Size Black for Short Person, Class 4

  • CLASS 4 LEVEL GAS LIFT CYLINDER -- This heavy duty gas lift cylinder made with high construction industry standard (BIFMA Plus Qaulity) for short person..
  • ADJUSTABLE HEIGHT 2.2 INCH -- Adjustable Height 2.2 Inch, the fully expanded height is 10.7 inch, the fully compressed height is 8.5 inch, which suitable for short person..
  • HEAVY DUTY 450LBs CHAIR PISTON -- MySit office chair gas lift cylinder holds up to 450lbs for most office chair, executive chair, computer chair, gaming chair..
  • REPLACEMENT PARTS FOR MOST OFFICE CHAIR -- Universal size replacement for most of office chair cylinder, executive chairs cylinder, full 360 degree rotation, smooth and without noise move to all directions..
  • EASY TO INSTALL -- You can installed easily without additional screws required, fix your sinking office chair by this standard size replacement chair piston instead of purchasing a new chair..
Check Stock

Trustsheer 532130969 V-Belt for Poulan AYP Craftsman Husqvarna 130969 Lawn Tractors YTH2042 YTH20K46 YTH22V46 YTH2348 YRH24V48 LGT2654 1/2'x92' Deck Drive Replacement Belt

  • Belt Size: A90 or 4L920 V Belt 1/2 x 92in Vbelt.
  • For Husqvarna 2042 LS, 2246 LS, 2346 XLS, 2348 LS, GTH 26 K 54 T, GTH 2654 T, LGT 2654, LOYTH 20 F 42 T, LT 140, YT 160, YTH 1542 XP, YTH 1848 XPT, YTH 20 B 42 T, YTH 20 F 42 T, YTH 20 K 46, YTH 2042, YTH 2146 XP, YTH 2242 T, YTH 2246, YTH 2348, YTH 2448 T, YTH 2454, LGT2554, YTH21K46, YTH23V48, YTH24V48LS, YT46LS, YTH22V46, YTH2348 Lawn Tractors.
  • For Poulan PB195A46LT, PB195H42LT, PB20A42LT, PB20A46LT, PB20H42LT, PB20H42YT, PB22H42YT, PB22H46YT, PBGT22H54, PB23H46YT, PB23H48LGT, PB23H48YT, PB26H54YT, PBLGT26H54, PP1242, PP1442, W17542H, XT195H42LT, PBLGT2654, PP24VH54, PPLGT2248 Lawn Tractors.
  • For Husqvarna GTH 2654T, LGT 24K54, LTH 18538, LTH 154, LTH 2038, YTH 20K46, YTH 2042, YTH 22V46, YTH 2348, YTH 24V54, YTH 2454, YTH 180, YTH 21K46, YTH 224T, YTH 22V42, YTH 22V42LS, YTH 22V46, YTH 23V42, YTH 24V42LS, YTH 24V48, YTH 24V48LS, TS 343, YTH 2348 Lawn Tractors.
Check Stock

Lumbar Support Pad Replacement for Herman Miller Classic Aeron Chair Office Chair - Graphite/Black - Size B

  • Bundle - With these office chair replacement parts, you'll get everything you need to breathe life into your old chair - step-by-step instructions,....
  • No Sinking - You need a chair that supports you while you're at work, or at home. Our replacement chair cylinder is built to last a lifetime, without....
  • Universal Gas Lift - Our gas lift fits just about any office chair, and is compatible with most popular office chair brands! No need to sweat a lift....
  • Class 4 Cylinder - Our heavy duty pneumatic piston replacement cylinder is a class 4, OEM-standard hydraulic device that won't let you down....
  • Money Saver - Don't sink your money into a whole new chair that, well, sinks. This gas lift cylinder is a cost-effective alternative to making sure....
Check Stock

Husqvarna 532410710 Lawn Tractor Deck Lift Lever Torsion Spring Genuine Original Equipment Manufacturer (OEM) Part

  • This part is compatible with models including.
  • 96042001600,PB2042YT,YTH2348-917240440,917223980,917990420,YTH2348-917240442,917289106,96043027400,YTH2348-917240443,917289105,917289104,917289103,PB20A46-96042016700,YT42DXLS-96043020300,917288142,PB20A46-96042016701,917288140,917288141,917288260,917256791,YT48CS-502130,917256790,917254130,917254131,96046007500,96042002700,96043003300,917289245,917289244,917289243,917289241,917289362,917988240,917289240,917289361,PP155A42-96042018300,917288270.
  • This is a manufacturer substitution. Part may differ in appearance but is a functional equivalent to prior parts including.
  • Genuine Original Equipment Manufacturer (OEM) part. Compatible Brands: Husqvarna.
  • This deck lift lever torsion spring (part number 532410710) is for lawn tractors.
  • Wear work gloves to protect your hands when installing this part.
Check Stock

DockMoor Fix Sinking Office Chair Upgrade 304 Stainless Steel with Hexagon Wrench Adjustable Height Chair Saver kit with Leather Pads

  • Upgraded office chair saver for stop sinking is made of 304 stainless steel, which has strong load-bearing capacity, more practical and effective, not easy to break or crack compared to other plastic products..
  • Fit size for gas cylinder charirs -- Universal suitable for most office chairs, the cylinder diameter is within 25-28mm.(0.98-1.1inch)..
  • Office chair buddy -- The height of the chair can be adjusted and fixed according to your needs, bringing a comfortable seating experience to you..
  • Upgraded chair sinking stopper -- our sinking clamp also made with 304 stainless steel, will not rust in daily use, blue solicone pads, the friction is greater and it fits closely with the cylinder to prevent the seat from sinking, Also prevents unsightly marks from damaging the chair..
  • Easy to install -- Come with an office chair sink stop and a free hexagon wrench to tighten the screws, No need to disassemble the chair or cylinder, a safe and adjustable chair fix replacement,save $200 for a new chair..
Check Stock

Spidfee Fix Sinking Office Chair, Avoid Sinking of Office Chair Height-Adjustable Cylinder Replacement No Tools Needed

  • Upgraded Office chair cylinder replacement: More effort- saving handle accessories, no tools required, no need to disassemble your chair gas lift cylinder. (Package does NOT include the cylinder.).
  • Office chair replacement parts, Install with bare hands. If it's not tight enough by hand, try using a screwdriver to get it as tight as possible..
  • The height of the chair can be adjusted and fixed according to your needs..
  • Universal suitable for most office chairs, the cylinder diameter is within 25-28mm..
  • Exceeding other low-quality plastic products on the market, the stainless steel material does not need to worry about cracking..
  • Fix your sinking chair, solve your worries and save the high cost of a new chair..
  • Updated the handle accessories, which can save more effort. You can use it according to your needs..
Check Stock

Gas Cylinder Heavy Duty for Herman Miller Classic Aeron Chair as Replacement

  • Listing is for a brand new never used CLASS 4, office chair seat height adjustment pneumatic gas lift cylinder. 4.5" stroke (seat travel from lowest....
  • Exceeds ANSI/BIFMA5.1-2011 standards, based on the specs of this cylinder, it's load capacity is 350 pounds..
  • Length Compressed: 11.5" Fully Extended: 16" Travel: 4.5", Cylinder Diameter: 28mm (1.1") Column Diameter: 50mm (approx 2").
  • After install, If the chair can't lift normally. Two screws located near where the cable attaches need to be adjusted, see photo 2..
  • Cylinder for Aeron Chair Size A, B and C, offer 5 years replacement warranty.Only For Aeron chair made between 1996-2012..
Check Stock

Fix Sinking Office Chair Gadget Fixing Drafting Chair Cylinder Sinking Stopper Adjustable Office Chair Gas Lift Cylinder Holder.

  • Facing Office Chair Sinking Problem ? : Have you ever been meet this situation of siting on office chair during working or reading or game playing,....
  • Save your time and money to buy a new piston and pay a expert to fix it..
  • Stainless Steel Material:Never Worry Breaking when compare to others cheap plastic chair cylinder holder on market..
  • Chair Fixing Height Freely :Combine and adjust your chair to your most comfortable height,then apply this gadget on..
  • Not Selling with Chair and Cylinder. Just a little metal Clamp.Simple and Effective Design to solve your chair sinking issues.fit for Chair Cylinder....
Check Stock

NICHEFLAG 197379 Idler Pulley Craftsman Compatible with Husqvarna AYP 196106, 532196106 Husqvarna Idler Pulley, 532197379 Husqvarna Idler Pulley, 532197379, 532 19 61-06, 709729, 280-727

  • This 197379 idler pulley craftsman Compatible with Husqvarna AYP 196106, 197379, 532196106, 532197379, 532 19 61-06, Murray 709729, 280-727.
  • This 532196106 husqvarna idler pulley Fits for Lawn Decks: Husqvarna 2042LS 2246LS 2346XLS 2348LS 2748GLS 2754GLS GTH2448 GTH2454 GTH26K54 GTH2648 GTH2654 LGT2654 LOGTH2448 PB19546 YT1942T YTH1542 YTH1848 YTH2042 YTH2146XP YTH2242 YTH2246 YTH2348 YTH2448 YTH2454 LGT2554 YTA19K42 YTH21K46 YTH23V48 RZ5424 YTH2348 YT46LS YTH24K48 YTH22V46 YTH2348 LT2217A LT2223A2 LT2227A2 LT2323A2.
  • This 532196106 husqvarna idler pulley Fits for Lawn Decks: Poulan PB19H42YT 460ZX PB20H42YT PB22H46YT PB23H48YT PB26H54YT PB195H42LT PB2042YT PBGT26H54 PXT195G42 PB20H42LT PB19546LT XT19H42YT 541ZX XT195H46YT PB19542LT PBGT22H54 PB20H46YT PO15542LT PB22H48YT PB195H46YT.
  • Size: 5-3/8" outer diameter , 3/8"inner diamter , 1-5/8" height.
  • Brand new and high quality, Made of high quality material, Durable and practical to use, Sturdy and durable, Superbly engineered alternatives, Easy to install, Perfect match to your Lawn Decks..
Check Stock

Fix Sinking Office Chair Tool Stainless Steel Inner Threaded Pipe Support Chair Saver for Stop Sinking Pneumatic Cylinder Replacement Chair Parts

  • Kit applies for:universal size suitable for most office gas cylinder chairs, it's within the cylinder diameter is within 25-28mm, that is 0.98-1.1inch..
  • The package includes：304 stainless steel clamps included a hexagon wrench to tighten the screws, convenient and durable perfect repair accessories for a sinking seating chair..
  • High quality:fix Sinking Office Chair kit is stainless steel has a strong bearing capacity, not easily breaking. a safe and adjustable chair fix replacement tools. making your seat experience more comfortable..
  • Good function:when the cylinder fails to prevent your office chair from sinking, office chair cylinder replacement alternatives come in handy, adjustable height fixes a sinking office chair saver..
  • After-sales service: If you have any questions or suggestions after reviewing our product information, please contact us, including any product quality or service experience problems that occur after you purchase the product, we will solve them for you..
Check Stock

New Foam Pad Replacement for Herman Miller Classic Aeron Chair Posturefit Lumbar Graphite/Black.

  • Listing is for a brand new never used CLASS 4 WITH 400N, office chair seat height adjustment pneumatic gas lift cylinder. 6.0" stroke (seat travel....
  • Exceeds ANSI/BIFMA5.1-2011 standards, based on the specs of this cylinder, it's load capacity is 350 pounds..
  • Cylinder Diameter: 28mm (1.1") Column Diameter: 50mm (approx 2")..
  • Cylinder for Size A, B and C Aeron Chair. offer 5 years replacement warranty..
  • Only Available for Aeron chair made between 1996-2012..
Check Stock

skyehomo Office Chair Gas Lift Cylinder Replacement, 5\ Gas Cylinder for Office Chair, Heavy Duty Hydraulic/Pneumatic Piston for for Most Executive Chairs,Black

  • 【High Quality】This gas cylinder for office chair is made of the highest quality 45# steel materials, durable and long lasting with a maximum capacity of 450 lbs..
  • 【Smooth & Noiseloss】The chair cylinder replacement with full 360 degree rotationand can move very smoothly and without noise, freely up and down or rotated..
  • 【Easy To Install】This office chair replacement parts could be installed easily with no additional screws required,just give your old office chair a new look in just 3 minutes!.
  • 【Wide Application】The office chair base replacement is standard model,suitable for most office chairs, executive chairs, computer chairs and gaming chairs..
  • 【Package Included】1x Chair Gas Lift Cylinder.
Check Stock