Top Hypoid Bevel Gear

Lucas 10122 75/140 Synthetic Gear Oil - 1 Gallon

  • EXTREME DRAIN INTERVALS - 500,000 miles for heavy duty trucks and passenger cars. 750,000 miles for Class 8 highway trucks..
  • PROFESSIONAL GRADE: Unrivaled shear stability and longevity. Meets and exceeds API GL-5 and Limited Slip requirements and a very wide range of specifications across multiple OEMs..
  • EXCELLENT WEAR CONTROL - Up to 62% less wear vs OEM Specifications across various standards. EXCEPTIONAL LOAD BEARING CAPACITY - Exceeds the highest load test rating, Stage 14..
  • WIDE RANGE OF APPLICATIONS - Hypoid and Ring Gears, Differentials, Limited Slip - Heavy Duty Highway, Passenger Cars, Heavy Duty Off-Road, Racing / Drifting. Will not shear under extreme torque. Features exceptional power transfer under extreme conditions. GREATLY EXCEEDS EP AND AW TESTS FZG AND L-37 - Proven protection far beyond spec requirements, delivers excellent EP (extreme pressure) and AW (anti-wear) performance in a wide range of LS and NON-LS gear systems, with hypoid and other gears..
  • TRUE SYNTHETIC WITH PAO - This is a true synthetic formulation with PAO base oil. Dont be fooled by cheap products which advertise themselves as Synthetics but have a VI Index below 160 and freeze at -30F and a very limited specification range..
Check Stock

Valvoline High Performance SAE 80W-90 Gear Oil 1 QT

  • Protects Against Severe Temperatures To Help Extend Service Life.
  • Formulated With Extreme-Pressure Additives To Minimize Gear Wear From Shock Loads.
  • Helps Protect Against Gear Wear From Scuffing, Scouring, Corrosion And Pitting.
  • Recommended For Conventional Hypoid Differentials And Non-Synchronized Manual Transmissions In Passenger Cars, Light Trucks, Sport Utility Vehicles, Vans And Heavy-Duty Trucks Where An Api-Gl5 Or Gl-4 Fluid Is Specified.
Check Stock

Royal Purple 06300 75w90 Max Gear Oil Case, 6 Quart, 1 Pack

  • Ultra-tough, high performance Automotive hypoid gear oil to provide maximum protection to heavily loaded gears while maximizing power throughout the drive train.
  • Max Gear outperforms ordinary gear oils by combining the highest quality synthetic oils with Royal Purple's proprietary Synerlec additive technology.
  • Makes gears run smoother, quieter, cooler and longer without overhauls.
  • A direct reduction of drag in the drive train has huge advantage for trucks and other 4-wheel drive vehicles.
  • Formulated with a friction modifier additive - no additional additives are necessary.
Check Stock

Valvoline 280 80w90 Durablnd Groil Qt

  • Protects against severe temperatures to help extend service life.Fit Type: Universal Fit.
  • Formulated with extreme-pressure additives to minimize gear wear from shock loads.
  • Helps protect against gear wear from scuffing, scouring, corrosion and pitting.
  • Recommended for conventional hypoid differentials and non-synchronized manual transmissions in passenger cars, light trucks, sport utility vehicles, vans and heavy-duty trucks where an API-GL5 or GL-4 fluid is specified.
Check Stock

Royal Purple 01300 Set of 3 Max Gear 75W-90 Oil 1-Quart Bottles

  • Royal Purple engineered this ultra-tough, high performance automotive hypoid gear oil to provide maximum protection to heavily loaded gears while maximizing power throughout the drive train. Max Gear outperforms ordinary gear oils by combining the highest quality synthetic oils with Royal Purple’s proprietary Synerlec additive technology..
  • Maximizes horsepower, Extends gear and bearing life, Reduces operating temperature, Severe service performance, Lower coefficient of friction, Superior corrosion protection.
  • Superior corosion protection, Seperates rapidly from water, Meets warranty requirements, Environmentally responsible, Formulated for limited-slip differential use.
  • Max Gear makes gears run smoother, quieter, cooler and longer without overhauls. A direct reduction of drag in the drive train has huge advantage for trucks and other 4-wheel drive vehicles: better gas mileage. Max Gear is formulated with a friction modifier additive – no additional additives are necessary..
Check Stock

Royal Purple 01300 Max-Gear Synthetic Gear Lube Oil 75W90 Pack of 6 Quarts

  • Royal Purple engineered this ultra-tough, high performance automotive hypoid gear oil to provide maximum protection to heavily loaded gears while maximizing power throughout the drive train. Max Gear outperforms ordinary gear oils by combining the highest quality synthetic oils with Royal Purple’s proprietary Synerlec additive technology..
  • Maximizes horsepower, Extends gear and bearing life, Reduces operating temperature, Severe service performance, Lower coefficient of friction, Superior corrosion protection.
  • Superior corosion protection, Seperates rapidly from water, Meets warranty requirements, Environmentally responsible, Formulated for limited-slip differential use.
  • Max Gear makes gears run smoother, quieter, cooler and longer without overhauls. A direct reduction of drag in the drive train has huge advantage for trucks and other 4-wheel drive vehicles: better gas mileage. Max Gear is formulated with a friction modifier additive – no additional additives are necessary..
Check Stock

TRIAX Synergy Gear MAX 75W-140 GL-5, PAO Synthetic Long-Drain Axle, Differential Extreme Pressure Oil, Limited Slip Ready, 750,000 Mile Rating on Highway (1 Gallon)

  • 500,000 miles for heavy-duty pickup trucks and passenger cars.
  • 750,000 miles for Class 8 highway trucks.
  • meets and exceeds API GL-5 and limited slip requirements with a wide range of specifications across multiple OEMs.
  • Up to 62% less wear vs OEM specifications across various standards.
  • exceptional load-bearing capacity exceeds the highest load test rating, stage 14.
  • Hypoid and ring gears, differentials, limited slip, heavy-duty highway passenger cars, heavy-duty off-road, racing/drifting.
  • exceptional power transfer under extreme conditions.
  • Proven protection far beyond spec requirements.
  • excellent extreme pressure and anti-wear performance in a wide range of LS and NON-LS gear systems with hypoid and other gears.
Check Stock

uxcell® 90 Degree Shaft Angle Replacement Part Spiral Bevel Helical Gear Set 3pcs

  • Ring Gear Size: 44 x 13mm/1.73'' x 0.51''(Max.D*T).
  • Pinion Gear Size: 19 x 12.5mm/0.75'' x 0.49''(Max.D*T).
Check Stock

Keylights Key Blank Specialty Bagged Sc1 Purple Plastic Head, Yellow Light

  • Ring Gear Size: 46 x 14mm/1.8'' x 0.55''(Max.D*T).
  • Pinion Gear Size: 17 x 12mm/0.67'' x 0.47''(Max.D*T).
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock