Top Ic Card Holder

FuzeCard | Card-shaped digital minimalist wallet for men | Card holder wallet | 0.03 inch ultra slim | Consolidate all your magnetic stripe & barcode card | NOT SUPPORTS STORING EMV IC CHIP CARD.

  • A most thin wallet for men / 30 cards in 0.03 inch card-shaped device : Consolidate every gift, membership, healthcare, and payment cards ( visa card, Master card, Amex Card, Credit card, Debit card) with magnetic stripe or barcode up to 30 in one digital card wallet : Smart Wallet : NOT SUPPORTS STORING CREDIT or DEBIT CARD WITH EMV IC CHIP!!.
  • Once again, MAGNETIC swiping transaction method and barcode only. NO EMV IC CHIP CARD !! Fuze Card is not defected if it won't work in your POS due to various process and firmware..
  • IF THE CARD IS FROZEN, CHARGE YOUR CARD PROPERLY. STEPS OF PROPER CHARGING IS ON OUR YOUTUBE..
  • Month-long battery life : Includes rechargeable battery. Lasts 30 days per charge. Portable power bank holds 1 extra charge for travel..
  • Easy to use mobile app --- Download the FREE FuzeCard companion app ‘eCard manager’ from the App Store or Google Play. Store your card data via encrypted Bluetooth by using our app..
Check Stock

YL160 USB 4 in 1 Multifunction Magnetic Swipe Card Reader+EMV Chip, RFID,PSAM Credit Card Reader Writer only for APDU Command Professional Person USB Simply Plug and Play CHNFUWEI

  • ✔️MULTI-FUNCTION CARD READER: Support Magstripe card reading ,Support Bi-directional swipe reading. RFID card, PSAM card and contact IC card support read and write.If for bank chip card, APDU command is needed to read and write..
  • ✔️USB INTERFACE: USB and PC communication, plug and play, not need any driver or software, and it is light, beautiful and practical..
  • ✔️LED LIGHT: The LED light prompts the data transmission process, and the CHNFUWEI YL160 4 in 1 Card Reader can read and write various memory cards and supports T=0, T=1 communication protocol CPU card..
  • ✔️APPLICATIONS AND OPERATING SYSTEM: The YL160 4 in 1 Card Reader Writer can be applied in industrial, commercial, telecommunications, tax, banking, insurance, medical and various expenses, storage, query management systems. The operating system can be Win7, Win 8,Win 10, Win2008, Win 2003, Win 2000, XP, Linux and so on..
  • ✔️ WHAT YOU GET: We provide USB 4 in 1 Card Reader for Credit Card. The Package comes with Free SDK CD, 1*RFID card, 1*PSAM card, 1*contact IC card, 1*Cleaning card..
Check Stock

Bus Pass Holder, Student id Card Holder, id Keychain Holder, Vertical ID Badge Holder with Clear Window, Card Holder with Clip, Work Badge Clip Name Badge Holder (Cow)

  • ...erial】Social Security Card Driver License Health Insurance Bright Blue Card Sleeve is made of premium PU leather which comfortable to touch. The hardware is made of high quality durable and long last stainless steel..
  • 【Functional Structure】1 clear ID window, 2 back card slots, 1 key ring. This PU Leather badge holder keychain is suitable for many uses - badge holder, ID display, business cards, name cards, cash and keys..
  • 【Simplify Your Life】: With a metal keyring, you can attach the card holder to your keys or lanyard. Buy our wrist/neck lanyards together to match your new wallet, you can also attach the chapstick holder or airpods case to it. They are so easy to be find when you are in a hurry to go out..
  • 【Pruduct Size】The ID holder case is 4.3" x 2.8 "..
  • 【Perfect Gift】It fits as a perfect gift under all festivals & occasions. Buy now for a daughter, friend, family, girls, teens, & kids, colleague, student, teacher, etc..
  • id holder clip id badge holder clip card keychain holder security card holder keycard holder tag holders for badges card holder with clip clip lanyard key card lanyard card clip id card holder with clip security badge holder key card lanyard work badge clip name badge holder.
  • card holders for lanyards card necklace hol....
Check Stock

Bluetooth X6BT Card Reader Writer Encoder Card Writer Device

  • 2. Built-in antenna for contactless tag access, with card reading distance of up to 50 mm (depending on tag type).
  • 3. Supports ISO 14443 Type A and B, FeliCa, and all 4 types of NFC (ISO/IEC 18092) tags. Supports new IC Ultralight C (via pseudo APDUs) and IC Plus....
  • 4. Working frequency with 13.56MHz frequency, can be used as both card reader and writer. Operating distance: up to 50mm (depends on tag type).
  • 5. Package including 1 card reader writer + 5pcs S50 cards + 5pcs UID writable keyfobs + free SDK software.
Check Stock

Marshal Slim Thin Leather Credit Card ID Mini Wallet Holder Bifold Driver's License Safe

  • ID CARD HOLDER: The ASR Federal black leather double sided ID credential card holder can be used for a variety of card holder needs: business card holder, credit card holder, ID card holder, metro pass holder or international travelers ID card holder. The double sided leather card holder can also function as a minimalist bifold wallet.
  • SECURITY CREDENTIAL CARD HOLDER: This ID card holder is especially useful with two clear windows for easy visibility, the bifold credentials holder discreetly and securely stows ID while still remaining accessible.
  • COMPACT DESIGN: Measuring just one inch in depth, the lightweight ID card holder easily slips into any pocket, backpack, suitcase or briefcase for convenient location and transport. The leather ID credential holder is also great for traveling whilst abroad.
  • GENUINE LEATHER MATERIAL: Made in the USA, the ID card holder is constructed from 100% heavy gauge premium leather, making it a durable and long lasting product. Over time and with use, the ID card holder will relax and mold to your preferred carrying method without losing its structure.
Check Stock

UNIROI Raspberry Pi RAB Holder Breadboard Kit with 830 Points solderless Circuit Board Raspberry Pi Holder for Arduino, Mega 2560 & Raspberry Pi 4B, 3B+, 3B, 2B and 1B+, A+ (52 Items)

  • This 14 in 1 RAB Holder kit is designed by for the Raspberry Pi and Arduino hobbyists, the holder is large enough for a Raspberry Pi 4B/ 3B/ 2B/ 1B+/ Zero/ Zero W, Arduino 328P Control Board or Mega 2560, and a 400 hole or 830 hole Circuit Board breadboard.
  • Including RPi GPIO Breakout Expansion Board and Ribbon Cable, which are special for Raspberry Pi 3 Model B, 2 Model B, 1 Model B+ and zero/ zero W..
  • This 830-tie/point breadboard includes an IC area of 630 points, plus two 100-point distribution strips, providing 4 power rails..
  • Comes with male-to-male 65pcs jumper wires, red, green, and yellow LEDs (three for each color), ten 1k resistors, a screwdriver, and some screws..
  • Gift: GPIO 40 pin Table Card for wiring Pi and BCM codes for all RPI motherboard..
Check Stock

40PCS NFC Tags NTAG215 NFC 215 Cards 504 Bytes Memory Blank PVC Cards Ntag215 NFC Chip for NFC Phone and Device Writeable Programmable

  • 1) This device is used to read and copy 125KHz and 13.56MHz frequency RFID key cards..
  • 2) Support card type: for 125KHz ID type: EM4100, TK4100, 8800, 5200, EM4305, T5577, 8265 etc. Can't support HID chip..
  • 3) Support card type: for 13.56MHz IC type: Mi-fa re 1k, UID, FUID, CUID, UFUID, IC Half-encryption, IC Full-encryption etc. (Not all type encrypted....
  • 4) Provide free software, very easy to use. Mini and light weight. Connect this device to your computer with the USB cable, then can find the....
  • 5) Has a USB interface, Two-color LED light prompt. Built-in buzzer "beep" sound reminder. Package including 1RFID copier + 1 USB cable + 5 RFID T5577....
Check Stock

レイ・アウト Ray-Out iPhone SE/5s/5 Case Disney Pop Up Book Leather Case Mickey Mouse RT-DP5SJ/MK

  • Introducing the Disney character pop-up book leather case from layout.
  • Watch out for the unique texture of Disney's popular characters.
  • In addition to the design, the lid provides full screen protection! Inside lid has pocket for IC card.
Check Stock

SANRUI Acrylic Business Card Holder for Desk,Vertical Business Card Display Clear Business Card Organizer

  • Sturdy Business Card Holder：Business card holder for desk is made of premium acrylic material with delicate manual polishing and rounded corners.Business Card Stand Holder itself is transparent, which in turn accentuates the presence of the card ..
  • High Capacity: This business card display holder has different specifications (1 to 20 slots),each slot can hold up about 50 standard size business cards(depends on the thickness of cards).Acrylic Name Card Holder inside size: L2.36xW1.38xH3.15 inches..
  • Vertical Design&Arc Design :This upright business card holder is suitable for business cards with vertical design. Elegant curved design, both beautiful and easy to take out business cards..
  • Thickened Stable Base:Card holder have 8mm thick base, not only a sense of heft, but also to ensure that the card display holder stands firmly on the desktop or countertop.Both functional and decorative..
  • Various Usage:Desk business card holder is not only used for office , hospitals, exhibitions, but also for storing gift cards in the home. Place the card holder on the entryway desk to display gift cards..
Check Stock

Ili9341 LCD Display Module, ILI9341 5V/3.3V 2.8\ TFT SPI Serial Port LCD Touch Panel Display Module, 240x320[with Touch(9 IO Drive)](Without Touch)

  • With PCB board (including power supply IC, touch IC, SD card cage) compatible 5110 interface. At least 4 IO driver are needed (without touch) , at least 9 IO driver are needed( with touch). 2.8 inch TFT LCD color screen, support 65K color display, and the display is colorful, high quality image display and wide viewing angle..
  • This 2.8-inch LCD module uses ILI9341 drive chip to drive 240*320 dot , with 240*320 resolution..
  • On-board level translation programs truly perfectly compatible 5V / 3.3V IO level, supports a variety of single-chip IO connection, professional and practical..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
  • Buy it Confidence: Let you feel safe using, so you have a better using experience. Great value for money. If you have any problems, please fell free to contact us anytime. Our team w....
Check Stock

kuman Raspberry Pi 4 B Holder Breadboard Kit, 7 in 1 RAB Holder kit Compatible for Arduino, Mega 2560 & Raspberry Pi 3 Model B, 2 Model B,1 Model B+ RPI Zero and Zero W

  • This 7 in 1 RAB Holder kit is designed by Kuman for the Raspberry Pi and for Arduino hobbyists, the holder is large enough for a Raspberry Pi 3B/ 2B/ 1B+/ Zero/ Zero W, for Arduino or Mega 2560, and a 400 hole or 830 hole Circuit Board breadboard(for Arduino rapsberrry pi motherboard and 400 breadboard are not included)..
  • Gift: GPIO 40 pin Table Card for wiring Pi and BCM codes for all RPI motherboard..
  • Including RPi GPIO Breakout Expansion Board and Ribbon Cable, which are special for Raspberry Pi 3 Model B, 2 Model B, 1 Model B+ and zero/ zero W..
  • This 830-tie/point breadboard includes an IC area of 630 points, plus two 100-point distribution strips, providing 4 power rails..
  • Comes with male-to-male 65pcs jumper wires, red, green, and yellow LEDs (three for each color), ten 1k resistors, a screwdriver, and some screws..
Check Stock

Gialer 10Pack PVC Card with Contact Smart IC Card Compatible with SLE4428 (1K Bytes/8K bits) Card for Access Control System Hotel Key Card ISO7816,Fudan FM4428 chip Card

  • This proximity IC card token tag has characteristics of small appearance, not fade, waterproof, easy to carry, can be hung on the key, durable and long service life.
  • The 13.56MHz UID key fob can be copied and it is rewritable.
  • Made of ABS with stainless steel key ring.
  • UID IC card key fob is widely used for identification, such as door entry access control system, home office elevator, garage and parking lot management, etc.
  • All the blocks are rewritable. UID card is invalid for the Internet firewall.
Check Stock