Top Ic Pic Mcu Flash

ALLSOCKET SSOP16-4.4-0.65 SOP16 Package TSSOP16 SSOP16 to DIP16 Programming Adapter Testing/Debug Socket 0.65mm Pitch 4.4mm Width(173mil) TSSOP16 package S-SSOP16(28)-0.65 OTS16(28)-0.65-01

  • APPLY FOR IC PACKAGE: OTS-16(28)-0.65-01, SOP-16(28)-0.65.
  • Specification: Temperature:-65~+150 Celsius, Life span: more than 20,000 times(Mechanical), Contact Plating: Gold contact, Adapter pin-pitch:2.54mm.
  • Tested before shipping, durable and warranty, technical support.
Check Stock

ALLSOCKET SSOP8-4.4-0.65 SOP8 Package TSSOP8 SSOP8 to DIP8 Programming Adapter Testing/Debug Socket 0.65mm Pitch 4.4mm Width(173mil) S-SSOP8(28)-0.65 OTS8(28)-0.65-01

  • APPLY FOR IC PACKAGE: OTS-8(28)-0.65-01, SOP-8(28)-0.65.
  • Specification: Temperature:-65~+150 Celsius, Life span: more than 20,000 times(Mechanical), Contact Plating: Gold contact, Adapter pin-pitch:2.54mm.
  • Tested before shipping, durable and warranty, technical support.
Check Stock

Diodes Incorporated Microprocessors - MPU ARM Cortex-A5 MPU 32bit, Video decoder (ATSAMA5D44A-CU)

  • 1 Pcs ATTINY84A-PU 8-bit Microcontroller with 8K Bytes In-System Programmable Flash..
  • MCU MICROCONTROLLER, 8 BIT, ATTINY, 20MHZ, DIP-14..
  • 8K Bytes of In-System, Self-programmable Flash Program Memory.
  • 512 Bytes of In-System Programmable EEPROM.
  • New and original ,quality ensured , no-hassle refund if you are not 100% satisfied!.
Check Stock

SparkFun Thing Plus - SAMD51 Development Board Powerful microcontroller with Qwiic connect system and integrated regulated LiPo charger No Soldering required

  • ATSAMD51J20 microcontroller 32-bit ARM Cortex-M4F MCU Up to 120MHz CPU speed 1MB flash memory 256KB SRAM Up to 6 SERCOM interfaces.
  • Micro-B USB interface for programming and power.
  • 4Mb (external) flash memory - Headers not included.
Check Stock

ELEGOO 8 Channel DC 5V Relay Module with Optocoupler Compatible with Arduino UNO R3 MEGA 1280 DSP ARM PIC AVR STM32 Raspberry Pi

  • 5V 8-Channel Relay interface board, each one needs 70mA Driver Current.
  • Equiped with high-current relay, AC250V 10A.
  • Each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • With power indicator,8-way road has a status indicator. With a relay coil to absorb the diode protection..
  • Standard interface that can be controlled directly by microcontroller (Arduino , 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
  • The 8 channels are optically isolated, safe, reliable, anti-interference. Widely used for all MCU control, industrial sector, PLC control, smart home control。For a complete data sheet for this relay board, please download it from: http://dwz.win/UhW.
Check Stock

AITRIP 8 Pack 3V 1 Channel Relay Power Switch Module with Optocoupler Opto Isolation High Level Trigger for IOT ESP8266 Development Board

  • 【30VDC 250VAC Load】 Equiped with high-current relay, AC250V 10A.
  • DC30V 10A, each relay has normally open and normally closed contact. Can be selected by jumper relay and TTL or ground..
  • 【High Level Trigger】The relay module is triggered by high level signal, which can be input from microcontroller IO..
  • 【 3V/3.3V power relay module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Wide Application】- These 3v relay board works well with ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/ ESP8266 module etc..
  • 【Long Life】 - Fast response time less than 20ms and long lifetime up to 100,000 times snap action with diode freewheel protection..
Check Stock

ALLSOCKET SOP8-3.9-1.27 SOP8 Package SOIC8 SO8 SOP8 to DIP8 Programming Adapter IC Test & Burn-in Socket 1.27mm Pitch 3.9mm Width(150mil) S-SOP8(16)-1.27 OTS8(16)-1.27-03

  • APPLY FOR IC PACKAGE: OTS-8(16)-1.27-03, SOP-8(16)-1.27-1.
  • Specification: Temperature:-65~+150 Celsius, Life span: more than 20,000 times(Mechanical), Contact Plating: Gold contact, Adapter pin-pitch:2.54mm.
  • Tested before shipping, durable and warranty, technical support.
Check Stock

AEDIKO 4pcs Relay Module DC 5V Relay Switch 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level Trigger

  • Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate.
  • All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed.
  • Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current.
  • Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input.
  • Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc..
Check Stock

HiLetgo 1602 LCD Keypad Shield 1602 LCD Expansion Shield Board Blue Backlight 4.5-5.5V for Arduino Duemilanove Robot

  • ☆ Premium Quality: Made of premium material, this lcd module display is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.
  • ☆ TFT LCD Serial Port Module : The lcd display module is a new 2.8 inch serial SPI color display module. Designed with one socket for sd card and PCB adapter for LCD.
  • ☆ Come With PCB Plate: With PCB plate (including power supply IC, SD), pcb display module is compatible with 5110 interface. Resolution: 128x160.
  • ☆ Support Analog & Hardware SPI: This tft display module supports analog SPI and hardware SPI, less I/O port need. It can be driven by 8051 / AVR / PIC /ARM/STM32. It can be driven with at least four IO.
  • ☆ What You Will Get: If you need the document to download, please contact us. We stand behind all of our them with a 100% product guarantee and promise to give you the best in customer care.
Check Stock

AOICRIE Upgraded Advanced Version 37 in 1 Sensor Modules Kit with Tutorial Compatible for IDE R3 MEGA2560 for Nano, Starter The RFID Learn Suite Kit LCD 1602 for R3

  • 37 Sensors Assortment Kit for Arduino MCU Education.
  • RFID Starter Kit for R3 Upgraded version Learning Suite With Retail Box Upgraded Version of Starter Kit RFID Stepper Motor Learning Kits with a CD for starter learning !!!.
  • Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+, Complete Update and common models for Mega 2560 starter kit..
  • Great sensor kit with tutorials compatible for raspberry pi, Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
  • Upgraded tutorial only for R3, for MEGA2560 R3, for NANO in CD, listing paper, There are tutorials in the CD that comes with. or download the tutorials online from the official website..
Check Stock

3v Relay Board Raspberry Pi Arduino Relay Module 1 Channel Opto-Isolate High Level Trigger for IOT ESP8266 Microcontrollers Development Board

  • 【1 Channel Relay Module】- This Relay Board provides a single relay that can be controlled by any 3V/3.3V digital input from your microcontroller IO..
  • 【Main Specification】- The 3v Relay 1 Channel power switch module compatible with 10A 250VAC and 10A 30VDC load.4pcs * 2.5 mm Fixed Bolt Hole..
  • 【Adopted Optocoupler Isolation】- 3V/3.3V power relay module supports photocoupler isolation control and dual power supply input ensure high anti-interference ability. Fast response time less than 20ms and long life time up to 100,000 times snap action with diode freewheel protection..
  • 【Jumper Caps】You can select whether the relay and the signal use the same power supply or not by removing the jumper caps on the pins. And It is better to share the same power supply, because that is more convenient for using..
  • 【Wide Application】- These 3v relay board works well with Arduino/ ARM /PIC /AVR /MCU/Raspberry/CNC machine/ PS4/3.3V /NodeMCU/IOT/ ESP8266 module etc..
Check Stock

DORHEA 5PCS TM1637 0.56\ 4 Bits Digital LED Display Module with Clock Display 0.36 inch Common Anode Red Digital Tube Board with Cable for Arduino Raspberry Pi DIY Kits

  • The module is a 12 foot with a clock point four common anode tube (0.36 in.) display module driver IC is TM1637 driver IC TM1637, only two signal lines can make the MCU control 4 8 digital tube..
  • Display device is a total of 4 red LED word tube. Digital tube 8 grayscale adjustable. Control interface level can be 5V or 3.3V..
  • 4-digit LED display module with LED brightness adjustable and clock point, can be used to display decimal, letters and so on, suitable for uses in induction cooker, micro-wave oven and small household electrical appliance..
  • Total 4 pins (GND, VCC, DIO, CLK), GND to ground, VCC for the power supply, DIO for the data input and output pins, CLK for the clock signal pin..
  • The Positioning holes in this LED Display Module 4 Bits has 4 M2 screws positioning hole diameter is 2.2mm and the positioning of the module is easy to install with easy to achieve the inter-module combination..
Check Stock