Top Ide To Usb For Linux
SATA/IDE to USB 3.0 Adapter FIDECO USB 3.0 Hard Drive Adapter Cable Universal for 2.5/3.5 inch SATA HDD/SSD & IDE HDD with 12V/2A Power Adapter
- Universal SATA/IDE Hard Drive Adapter: It can support 2.5 "/3.5" SATA I/II/III Hard Drive and 2.5'' SATA SSD.
- Super Speed USB 3.0: USB 3.0 supports transfer rates of up to 5Gbps(The actual transmission speed is limited by the setting of the device....
- Pulg & Play: Support Plug and play & hot swap, On/Off power Switch for Hard drives protection. Tips: Some IDE hard drive is old, you need to set....
- System Compatibility: Support Windows XP/Vista/7/ 8.1/ 8/10, Mac OS 10 or higher, Linux etc. Support devices PS4/Xbox/TV/monitoring equipment..
- Customer Focus: Our goal is to give you a 100% satisfaction shopping experience, so we provide 18 months warranty.
Check StockTccmebius TCC-S865 USB 3.0 to SATA IDE Dual Slots External Transparent Hard Drive Docking Station with Card Reader and 2 Ports USB 3.0 Hub for 2.5 3.5 Inch IDE SATA I/II/III HDD SSD
- Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports all 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum support 8TB SATA interface Hard disk, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
- Data transfer: Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard disk to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5 Gbps. Integrated card reader (TF card / SD card), at the same time card reader can read only one memory card, up to 64GB..
- Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
- WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..
Check Stock7Pcs ATTINY88 Microcontroller Development Board 16Mhz I2C and SPI 26-PWM Digispark ATTINY85 Nano V3.0 Extended Module
- ATTINY88 micro development board based microcontroller development board similar to the board line, only cheaper, smaller, and a bit less powerful..
- With the ability to use the familiar IDE the MH-ET LIVE Tiny88(16.0Mhz) is a great board to jump into electronics, or perfect for when an other board is too big or too much..
- ATTINY88 micro development board has 26 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
- ATTINY88 micro development board support for the IDE 1.0+ (OSX/Win/Linux).
- The MH-ET LIVE Tiny88(16.0Mhz) is fully assembled except for the headersincluded and easy to solder them by yourself..
Check StockHard Drive Docking Station, Tccmebius TCC-S867-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External HDD Enclosure, for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD
- ...g the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
- Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
- WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..
Check StockAOICRIE 3pcs Digispark Kickstarter ATTINY85 General Micro USB Development Board Module Compatible
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB..
- Support for the for Arduino IDE 1.0+ (OSX/Win/Linux)..
- Power via USB External Source - 5v or 7-35v (automatic selection)..
Check StockTccmebius Hard Drive Docking Station, TCC-S868-US USB 3.0 to 2.5 3.5 Inch SATA IDE Dual Slots External HDD Enclosure, for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD
- ... computer. (How to download OTB software? Please refer to the product's user manual.). Note: OTB software cannot be installed on macOS and IOS systems..
- Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
- WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..
Check StockAiTrip 5pcs Digispark Kickstarter Attiny85 General Micro USB Development Board for Arduino
- Support for the . IDE 1.0+ (OSX/Win/Linux)..
- Power via USB or External Source - 5v or 7-35v (automatic selection)..
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB)..
Check StockXiwai Low Profile Half-Heigh mSATA SSD to 2.5 inch IDE 44pin Hard Disk Case Enclosure for Notebook Laptop
- IDE to SATA Adapter. One Male SATA 7+15pin port convert to 2.5 inch Female PATA port (44-pin IDE) Adapter.
- The product for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
- Adapter 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE hard disk in the laptop or desktop which have SATA connector..
- Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Improve the use of IDE hard disk..
- Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux. Dimensions: 2.72" x 0.55" x 0.69"..
Check StockHard Drive Docking Station, Tccmebius TCC-S862-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External Enclosure with All in 1 Card Reader and USB 2.0 Hub for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD
- ...g the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
- Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
- WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support from Tccmebius. In use of products during any product issues, please email to us, we will do our best to solve for you, thank you for your understanding and support..
Check StockLWS 2.5 Inch IDE to SATA Adapter Convert Laptop 44 Pin Male IDE PATA HDD Hard Disk Drive SSD to a Serial ATA Port 。
- IDE to SATA Adapter. One Male SATA 7+15pin port convert to 2.5 inch Female PATA port (44-pin IDE) Adapter.
- The product for up grading an old computer with 2.5 inch IDE HDD to a new 2.5 inch SATA HDD..
- Adapter 44-Pin IDE 2.5" HDD to SATA Adapter can allow you use your laptop 2.5" IDE hard disk as SATA disk. You can use your 2.5" IDE hard disk in the....
- Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives. Improve the use of IDE hard disk..
- Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux. Dimensions: 2.72" x 0.55" x 0.69"..
Check StockAITRIP 5 PCS Digispark Kickstarter Mini ATTINY85 Micro USB Development Board Module for Arduino IDE 1.0
- Support for the Arduino IDE 1.0+ (OSX/Win/Linux).
- Power via USB or External Source - 5v or 7-35v (12v or less recommended, automatic selection).
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
- Power LED indicator and Test / Status LED (in Pin0).
Check StockAOICRIE 5pcs ATTINY85 Module General Micro USB Development Board for Arduino (5pcs USB ATTINY85)
- Support for Arduino IDE 1.0+ and OSX/Win/Linux.
- Power via USB or External Source - 5v or 7-35v (automatic selection)..
- I2C and SPI (vis USI),PWM on 3 pins (more possible with Software PWM),ADC on 4 pins.
- 6 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
Check Stock