Top Ide sata Hard Drive Dock

160 GB 160G 5400 RPM 2.5' IDE PATA WD1600BEVE for Laptop Hard Disk Drive

  • Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5"/3.5" IDE/SATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Compatible read up to three hard drives simultaneously!.
  • One Touch Backup (OTB) Function. Design for people who need to backup data from your computer to portable hard drive. (Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux).
  • Plug and Play, Hot- swappable, no driver needed. On/Off Switch design for HDD protection. Led light shows power and activity status..
  • Support 2 IDE and 1 SATA hard drives connecting simultaneously! Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive.
  • SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0(high-speed 480 Mbps) / USB 1.1(full-speed 12 Mbps) standards. The actual transmission speed subjects to the setting of the device connected.
Check Stock

USB to SATA IDE HDD Adapter - USB 3.0 Cable to 2.5" 3.5" SATA IDE Hard Drive Converter for Windows 10/8/ 7/XP, Mac, Internal to External Laptop SSD Reader Kit, File Data Transfer Conversion Cord

  • UNIVERSAL USB to SATA/ IDE ADAPTER -- Our USB to SATA IDE HDD adapter is designed for 2.5"/ 3.5" SATA HDD/ SDD, 2.5"/ 3.5" IDE HDD hard drive, supporting DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD+RW, compatible with windows 7,8,10, vista, XP.
  • ACCESS TO 3 DRIVES SIMULTANEOUSLY -- plug & play, no driver needed. This converter allows you to connect 2.5” 3.5” IDE & SATA hard drives to your computer via USB port. Perfect for duplicate, backup or transfer data from the hard drives to another one. It has a SATA II connector and two IDE connectors (40pin and 44pin)..
  • FAST & RELIABLE TRANSFER RATE -- With USB 3.0 interface, high speed transfer rate up to 5Gbps. Supports 2.5 '' 3.5 '' SATA , IDE up to 5TB. The IDE Converter is also backwards compatible with USB 2.0 / 1.1..
  • PORTABLE DESIGN -- This USB to SATA IDE HDD adapter is so portable that you can tuck it away in a laptop bag, letting you accessing old and new hard drives anywhere..
  • POWER ADAPTER SUPPLIED -- Including a 12V DC power adapter ensures 2.5"/3.5....
Check Stock

Hard Drive Docking Station, Tccmebius TCC-S867-US USB 2.0 to 2.5 3.5 Inch SATA IDE Dual Slots External HDD Enclosure, for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports most 2.5 "/ 3.5" IDE / SATA I / II / III hard drive and SSD, Maximum supports 8TB SATA interface hard drive, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Tool free installation, Convenient external hard drive reader. Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard drive to your computer via USB 2.0 port, USB 2.0 data transfer rate up to 480MB / s..
  • One-Touch Backup: One-Touch functionality makes it easy to copy data and documents from your computer to an external hard drive. For information on using the OTB feature and downloading the OTB software, please refer to the product guide. Note: OTB software cannot be installed on macOS and IOS systems..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
  • WARRANTY: We promise 1-year limited warranty and worry-free lifelong technical support f....
Check Stock

StarTech.com 4 Bay USB 3.0 (5 Gbps) Hard Drive Docking Station w/UASP for 2.5" & 3.5" SATA SSD HDD - Multiple External Hard Drive Cloner/Copier Dock (SDOCK4U33)

  • Support SATA III (6 Gbps) and UASP for optimal performance.
  • Compatible with USB enabled computer systems such as Dell Optiplex & Apple Mac & MacBook and SATA 2.5in/3.5in hard drives.
  • RELIABLE SUPPORT: Backed by a StarTech.com 2-year warranty, this 4 bay SATA hard drive docking station has free lifetime technical support.
  • Dock and Swap Hard Drives directly to your computer system without mounting.
  • Connect and swap four 2.5/3.5” SATA drives or SSD through USB 3.0.
  • DUAL FANS: Keep your drives running cool and help prevent premature drive failure with the built-in dual 40 mm fans on this multiple hard drive copier.
  • INDEPENDENTLY POWERED SATA CONTROLLERS: You will experience a hassle-free operation with this hard drive duplicator dock. It features independent SATA controllers allowing for uninterrupted data transfers while hot-swapping the other drives.
  • MULTIPLE HARD DRIVE DUPLICATOR DOCK: Connect and swap four 2.5 / 3.5” SATA HDD/SSD drives simultaneously through a single USB port with this 4 bay external hard drive cloner.
  • Hard Drive Dock / Four Bay Dock / Hard Drive Docking Station / SATA Dock / Hard Drive Docking Station with UASP / SATA HDD Docking Station / Hot Swap Hard Drive Dock.
  • EXPERIENCE HIGH PERFORMANCE: This USB 3.0 to SATA hard d....
Check Stock

Tccmebius Hard Drive Docking Station, TCC-S868-US USB 3.0 to 2.5 3.5 Inch SATA IDE Dual Slots External HDD Enclosure, for 2.5\ 3.5\ IDE SATA I/II/III HDD SSD

  • Universal compatibility: 1 IDE port + 1 SATA port, With adjustable IDE connectors, Supports most 2.5 "/ 3.5" IDE / SATA I / II / III hard disk and SSD, Maximum supports 8TB SATA interface hard drive, IDE interfaces maximum support 1TB hard drive. Please select the right model to avoid your order error. (Note: Please do not replace the hard drive when the product is working.).
  • Data transfer: Tool free installation, Convenient external hard drive reader. Easy transfer of data from your 2.5 "/ 3.5" IDE or SATA hard drive to your computer via USB 3.0 port, USB 3.0 data transfer rate up to 5.0Gbps..
  • One-Touch Backup: Through the One-Touch Easily Set Data and Documents From Your Computer Copy to External Hard Drive. Note: To use this feature, you must first install the OTB software on your computer. (How to download OTB software? Please refer to the product's user manual.). Note: OTB software cannot be installed on macOS and IOS systems..
  • Operating System: Compatible with Windows XP / Vista / 7/8 / 8.1 / 10 (32/64 Bit), Mac OS 10.10 or later. Please format the disk according to your operating system (Linux and Mac OS are compatible with FAT32 and exFAT, Windows is compatible with FAT32, exFAT and NTFS)..
  • WARRANTY: We promise 1-year limited warranty and wo....
Check Stock

FIDECO SATA/IDE to USB 3.0 Adapter, Hard Drive Adapter Cable for Universal 2.5/3.5 Inch IDE/SATA External HDD SSD, 5.25-Inch DVD-ROM/CD-ROM/CD-RW, Offline One Touch Clone, Support 16TB (Cable PL06)

  • 【Wide Compatibility】FIDECO IDE and SATA adapter can support 2.5 or 3.5 inches SATA or IDE hard drives. It can support the simultaneous connection of 2 HDDs for data transfer - IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Please note that IDE Source and SATA1 Source cannot be connected simultaneously..
  • 【Offline Clone】FIDECO hard drive converter can support offline clone. No computer is needed! Just press the "CLONE" button for 3 seconds until the first blue light (25%) flashes. You can operate offline clone only in 2 combinations: IDE Source+SATA2 Target.
  • SATA1 Source+SATA2 Target. Capacity requirement: SATA2 Target ≥ IDE/SATA1 Source..
  • 【Compatible System】FIDECO SATA or IDE adapter is widely compatible with Windows, Mac OS, and Linux. Just plug and play with no driver or software needed!.
  • 【5Gbps High Speed】FIDECO hard drive adapter is engineered with USB 3.0 port and can offer data transfer speeds up to 5Gbps. Transfer large files within seconds! It can be also backward compatible with USB 2.0/1.1..
  • 【Warm Note】For new HDD/SSD, please go to "Disk Management" to initialize it first, and then your HDD/SSD can be recognized. If you have any other question, please contact us via amazon email at any time. Our engineer can offer tech....
Check Stock

SATA/IDE to USB 3.0 Adapter, Unitek IDE Hard Drive Adapter for Universal 2.5\/3.5\ Inch IDE and SATA External HDD/SSD, Support 10TB

  • 【Universal IDE Hard Drive Adapter】Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. Support SATA 2.5"/3.5" HDD up to 10 TB, IDE 2.5"/3.5" HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Allowed to operate three hard disk drives simultaneously..
  • 【Stable Power Supply】Included 12V 2A power cable. 4PIN Power Cable is designed for 3.5’’ IDE drive..
  • 【SuperSpeed USB 3.0】Data transfer rates up to 5Gbps, backward compatible with USB 2.0/1.1. Support Windows XP/Vista/7/8/10 and Mac OS..
  • 【Driver Free】Plug and play. Automatic Sleep Mode after 30 minutes of inactivity. Support Hot Swapping. On/Off Switch for HDD protection. LED light shows Power and Activity status..
  • 【What We Offer】SATA/IDE to USB 3.0 Adapter Hard Drive Cable x1, 12V 2A Power Adapter x1, 4PIN Power Cable x1.
  • 24h-friendly customer service and email support..
Check Stock

Xiwai SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop & 2.5 Hard Disk Drive

  • SATA Female to IDE 44Pin Converter Adapter PCBA for Laptop & 2.5" Hard Disk Drive  2.5 inch SATA SSD or HDD Drive to IDE 44pin converter Board.
  • Works with all SATA Drives up to 500GB  Supports IDE 66/100/133MB/s.
  • No need for an extra power supply.  44 Pin IDE connector powers the Drive no other cables or adapters are needed.  No driver needed, plug and play,....
  • Great for all Mini Computers that use 44 pin IDE connector and require an upgrade to new SATA 2.5 Inch Drives.  Adapter is good for up grading an old....
  • Dimensions: 2.72" x 0.55" x 0.69" ( L 69mm x D 14mm x H 17mm ) Compatible with DOS, Windows 98/98SE, Me, 2000, 2003, XP, Vista, Windows 7 & Linux..
Check Stock

StarTech.com USB 3.0 to SATA IDE Adapter - 2.5in / 3.5in - External Hard Drive to USB Converter – Hard Drive Transfer Cable (USB3SSATAIDE)

  • EXTREMELY VERSATILE: This USB 3.0 to SATA IDE Adapter has built in connectors for both 2.5in and 3.5in SATA hard drives (HDDs) and SATA solid state drives (SSDs) and IDE hard drives.
  • COMPACT DESIGN: This hard drive data transfer cable features a compact, portable form factor design that fits perfect in your laptop bag, making it ideal for professionals on the go.
  • HIGH TRANSFER SPEEDS: For fast access to external storage, this hard drive transfer converter supports transfer rates up to 5Gbps using USB 3.0.
  • PLUG-AND-PLAY: Designed with convenience in mind, this SATA and IDE hard drive adapter is hot swap and plug-and-play compatible.
Check Stock

for PS2 Sata Adapter, Upgrade Board for PS2 IDE Original Network Adapter for Game, A LargeCapacity for Sata Hard Disk Adapter

  • 【Specially Design】 Precise cut, perfect fitness, suitable for PS2 IDE original network adapter, connect a SATA hard drive to your console, and use the loader to play games from the hard drive.
  • 【Save Game Loading Time】Use this SATA network hard disk adapter for PS2 IDE original network adapter, A large capacity for sata hard disk is used to replace the IDE hard disk to play the game, which will save us a lot of game loading time..
  • 【Easy to Install】Equipped with mounting screw pack, which makes it easy to install and detach.Efficiently simplify your work!.
  • 【Good Performance】The Sata HDD hard disk converter adapter for PS2 console made of high quality PCB board material, with fast operation speed and excellent performance..
  • 【Portable SATA Network Adaptor】Upgrade sata adapter for PS2 is small and lightweight, convenient for us to storage and a good replcement accessory..
Check Stock

WEme USB 3.0 to SATA IDE Adapter with Universal 2.5\ 3.5\ Hard Drive Disk Converter for HDD SSD and IDE HDD, Support 12TB and One-Touch Backup, Include 12V 2A Power Adapter and USB 3.0 Cable for Laptop

  • Connect your SATA / IDE device to your computer as an additional external hard drive via USB 3.0. Compatible with 2.5"/3.5" IDE/SATA hard drives and DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Compatible read up to three hard drives simultaneously!.
  • One Touch Backup (OTB) Function. Design for people who need to backup data from your computer to portable hard drive. (Please install the included OTB Software CD. OTB function doesn't work for Mac OS and Linux).
  • Plug and Play, Hot- swappable, no driver needed. On/Off Switch design for HDD protection. Led light shows power and activity status..
  • Support 2 IDE and 1 SATA hard drives connecting simultaneously! Compatible with two IDE hard drives simultaneously, If not, Please set the 3.5'' IDE to be the slave drive based on the instruction on the hard drive.
  • SuperSpeed USB 3.0 enables data transfer rates of up to 5Gbps, downwards compatible with USB 2.0(high-speed 480 Mbps) / USB 1.1(full-speed 12 Mbps) standards. The actual transmission speed subjects to the setting of the device connected.
Check Stock

StarTech.com 4-Bay Hard Drive Duplicator and Eraser, External Standalone 1:3 HDD/SSD Cloner/Copier, USB 3.0 / eSATA to SATA Docking Station, Hard Disk Copier / Sanitizer / Wiper Tool (SATDOCK4U3RE)

  • DUPLICATE, ERASE AND DOCK: This 4-bay external cloner and drive eraser/ wiper performs standalone cloning or erasing of 2.5/3.5" SATA drives.
  • Hard disk docking station for quick access to your 2.5/3.5" SATA drives over USB or eSATA.
  • DRIVE COMPATIBILITY: Works with 2.5/3.5" SATA and IDE SSDs/HDDs of any capacity.
  • Included IDE cable adapters support 40-pin/3.5in and 44-pin/2.5in drives.
  • Hardware includes eSATA and USB-A cables and Universal Power Adapter.
  • DUPLICATION AND ERASE MODES: Up to 4.2 GB/min Standalone sector-by-sector cloning.
  • Target disk must be equal/larger than the source disk.
  • Supports Quick Erase & Secure Erase (NIST SP 800-88 Rev 1 Purge).
  • Disk mount / File transfer / Backup / Recovery tool.
  • LCD MENU DISPLAY: Use push button menu navigation to select duplication and erase modes, and check drive info.
  • USB 3.2 Gen 1 (5 Gbps) or eSATA (3 Gbps) Host Device Connection (optional).
  • Top-Loading w/ Drive Doors & Eject Buttons.
  • THE IT PRO'S CHOICE: Designed and built for IT Professionals, this hard drive copier an....
Check Stock