Top Ideskcomputer Ssd

Cable Matters Premium Aluminum 10Gbps Gen 2 USB C Hard Drive Enclosure for 2.5\ SSD/HDD with USB-C and USB-A Cables - Thunderbolt 4 / USB4 / Thunderbolt 3 Port Compatible with MacBook Pro, MacBook Air

  • USB C 2.5 External SSD Enclosure supports a 2.5" SATA SSD or HDD drive.
  • portable external hard drive in a sturdy aluminum housing protects the SSD drive and assists with heat dissipation.
  • Portable USB 3.1 SSD enclosure offers convenient and fast data back-up for temporary or long-term use.
  • Diagnose internal SATA SSD drives for replacement or repair with this SATA HDD adapter.
  • Tool free SATA hard drive enclosure offers a data transfer rate up to 10Gbps with a compatible computer.
  • 10Gbps data transfer rate is 2x faster than USB 3.0.
  • Thunderbolt 3 computer compatible with the included USB C cable.
  • Supports the maximum SATA III 6Gbps data transfer rate.
  • SSD hard drive USB C to SATA storage solution is compatible with Windows or Mac computers as a Thunderbolt 3 hard drive enclosure.
  • USB C SSD enclosure provides a cost-effective solution for adding additional memory without opening up your laptop.
  • UASP, TRIM and S.M.A.R.T support with compatible computers, drives and OS for increased data transfer speeds, improved CPU utilization and failure detection.
  • 10 Gbps USB C hard drive ENCLOSURE is compatible with SATA SSD or HDD drives up to 9.5mm, including 7mm.
  • SATA to Thunderbolt 3 hard drive enclosure is compatible with SATA drives such as the Samsung 860 EVO, Kin....
Check Stock

ORICO M.2 Enclosure for NVMe SSD, USB4.0 40Gbps Type-C to M Key B+M Key 2280 Aluminum External SSD Case Compatible with Thunderbolt 3/4 USB3.2/3.1/3.0/ Type-C-M2V01

  • 【Multiple Transmission Protocol 】ORICO M.2 NVMe SSD external case adopts dual-chip master which support USB4.0 and fully compatible with Thunderbolt 3/Thunderbolt 4 USB3.2/3.1/3.0/Type-C (USB2.0 and below not compatible)..
  • 【40Gbps High Speed 】With USB4.0 Type-C output interface, it supports the maximum transmission speed up to 40Gbps. The measured maximum continuous read speed can reach 2700MB/s, and the continuous write can reach 1400MB/s.（This data comes from ORICO laboratory. Please note that the speed is different in different environments.）.
  • 【Only for M.2 2280 NVMe SSD】ORICO M.2 SSD Enclosure is specially designed for M Key & B+M Key NVMe SSD up to 2TB capacity. The applicable SSD size is 2280. (Does not support NGFF SATA M.2 SSD, M.2 PCIe AHCI SSD, mSATA SSD.).
  • 【Easy to Use】You just loosen the screw of the cover, put your SSD gently into SSD external housing, then fix the cover with a screw and connect cable to start work. Plug and play. No driver needed. Compact and portable. Easy to carry with lanyard hole..
  • 【Universal Compatibility】ORICO M.2 SSD case includes supports Windows/ Mac / Linux system, not only for PC and laptop, but also for smart TV, smart router and PS4 etc. NOTE: To achieve thunderbolt speed, please use thu....
Check Stock

GLOTRENDS Dual M.2 PCIe 4.0/3.0 X8 Adapter, Support M.2 PCIe SSD (NVMe/AHCI Key M) RAID Setup under PCIe Bifurcation Enabled Motherboard, Support Intel VROC and AMD Ryzen Threadripper NVMe RAID (PA21)

  • Dual M.2 PCIe 4.0/3.0 SSD Adapter: add 2 x M.2 PCIe 4.0/3.0 SSD (NVMe/AHCI Key M) onto a single PCIe X8 add-on card, you can use 2 separate M.2 PCIe SSD at the same time. Support Intel VROC and AMD Ryzen Threadripper NVMe RAID under PCIe Bifurcation Enabled Motherboard..
  • ASM1182e solution allow 2 x M.2 PCIe 4.0/3.0 SSD obtain PCIE X8 bandwidth (8GB/s with PCIe 3.0 or 16GB/s with PCIe 4.0), but only under PCIe Bifurcation enabled motherboard. Note: To reach PCIe 4.0 speed, make sure your CPU and motherboard and PCIe SSD are all PCIe 4.0 enabled. Otherwise, it would not be PCIe 4.0 speed..
  • Compatible with PCIe 4.0/3.0/2.0 motherboards, and install on PCIe X8/X16 slot. Low-profile bracket and regular-profile bracket are included, so work with 2U high workstations or servers with Windows, Linux, and mac OS. No driver installation is required..
  • Applicable with 2230/2242/2260/2280/22110 size M.2 PCIe SSD (Key-M), such us Samsung: 980/ 970 PRO/ 970 EVO Plus/ 970 EVO.
  • Intel Optane SSD P1600X Series , Intel SSD 6 Series.
  • Western Digital: WD_BLACK SN750 SE, WD Blue SN550, WD Green SN350, etc. Note: not support M.2 SATA SSD (Key-B)..
  • Note: Your motherboard BIOS must support M.2 NVMe SSD, and support booting from PCIe in order to boot from M.2 NVMe SSD on this M.2 P....
Check Stock

NVMe M.2 Duplicator Dual-Bay Clone Enclosure, Tool-Free USB to NVME Adapter with Cooling Fan, 10Gbps Docking Station NVMe Enclosure Support Offline Cloning and Duplicator for M2 2230/2242/2260/2280

  • 【NVMe M.2 SSD Offline Cloner】- No need for any computer or laptop, our NVMe enclosure helps you clone the old SSD quickly. Only just take 10mins to clone 500G SSD from "Source SSD" to "Target SSD", saving your time to backup the SSD data.NOTES: Make Sure the capacity of The Target NVME M.2 SSD is larger than or equal to The Sources'.Please Back up the Data on the target disk before cloning to avoid losing important data..
  • 【10Gbps Extreme Speed】- This 2 in 1 M.2 duplicator is applicable to sizes 2230/2242 / 2260 / 2280 NVMe M.2 drivers. M.2 Enclosure Reader reaches up to 10 Gbps high speed for NVME M.2 through USB 3.2 Gen 2, a perfect solution for data transfer and data backup. One HD movie transfer only takes 2-5 seconds. (NVMe SSD is not included. Not support SATA SSD).
  • 【Excellent Heat Dissipation System】-M.2 Adapter adopts a classic black design, is durable, can quickly dissipate heat, and protects the hard disk when in use. The auto cooling fan can cool the SSD quickly, which starts running after the transfer files 10 seconds and cuts off after finishing the transfer 10 seconds..
Check Stock

JESOT NGFF M.2 NVMe SSD Convert Adapter Card for Upgrade MacBook Air 2013 2014 2015 2016 2017 and Mac Pro Retina 2013 2014 2015, NVMe AHCI SSD Upgraded Kit for A1465 A1466 A1398 A1502

  • [NVME SSD Adapter] - This NVMe SSD convert adapter is DIY kit for assembling a upgraded SSD replacement for MacBook with large capacity NVMe SSD.
  • [High Performance] - Used to upgrade your storage capacity, perfect for tech enthusiasts, high-end gamers, 4K & 3D content designers.
  • [Applicable SSD Hard Drive] - ONLY support PCIe NVMe based based M Key and B+M Key SSD (NVMe & AHCI), such as Adata NVMe SSD: SX6000, SX7000, SX8200, SX8200 Pro etc, Corsair : MP500, MP510, Crucial: P1, HP: ex920, ex950. Intel NVMe SSD: 600p, 660p, 760p, Toshiba XG3-XG4-XG5-XG5p-XG6 line, Samsung: 960 Evo, 960 Pro, 970 Evo, 970 Pro, WD: v1, v2 and v3, MyDigital: SBX - BPX. NOT support any SATA based SSD.
  • [Support System] - It is compatible with MacBook Air 11 “A1465 & MacBook Air 13” A1466 (Mid 2013-2017), MacBook Pro (Retina) 13 “ A1502 & 15" A1398 (Late 2013 - Mid 2015), Mac Pro ME253 MD878.
  • [Please Note] - Require Mac OS 10.13 High Sierra or Later.
  • DO NOT compatible with earlier than Mac OS 10.13 versions.
  • DO NOT support Samsung 970 Evo Plus, PM981, 950 Pro. Please use your ori....
Check Stock

YIOVVOM M.2 NVME SSD to PCIe 3.0/4.0 x4 Adapter with Aluminum Heatsink Solution Supports 2280, 2260, 2242, 2230 Solid State Drives

  • This M.2 NVME（M Key） SSD to PCIe expansion card Only fit for PCIe M.2 NVME based M Key& B+M Key SSD. Support PCI-e 4x 8x 16x interface. But do not support SATA based SSD!.
  • Equipped with Aluminum heatsink can reach 8-25 degrees celsius cooling effect，double-sided copper hole strip porous heat dissipation structure reduces high heat generated. Making full use of the powerful performance of SSD.
  • Multi-layer PCBA, Multi-layer protection: Overcurrent protection，Overvoltage protection，Short circuit protection，EMI (Electromagnetic Interference) protection, Heatsink layer for overheat protection . Maximum protection of M.2 NVMe SSD from electrical signal interference..
  • No driver required for Win10, plug and play, Supports NVMe SSD, such as Samsung 950Pro/960EVO/XP941/PM951/PM961/SM951/SM961, Plextor M6e Series, Kingston HyperX Predator M.2 SSD and so on..
  • Package include: 1* Adapter, 1* Aluminum Heatsink Profile, 1* Cabinet screw, 1* SSD screw, 1* Screw driver.
Check Stock

Sintech 24pin to SATA Adapter with USB SATA Cable,Compatible with SSD from MacBook Air Pro 2012 Year NOT fit SSD from 2013-2015 Year

  • Alow 2012 Year macbook Air SSD to work as USB external Storage in desktop or laptop.
  • Alow 2012 Year and Early 2013 year macbook PRO Retina SSD to work as normal SATA SSD in desktop,Not Fit in laptopp.
  • Support SSD from 2012 year MACBOOK AIR MD224 MD223 MD231 MD232.
  • Support SSD from 2012-early 2013 Year MACBOOK PRO Retina MC975 MC976 MD976.
  • Notice: Before buy it, pls check if gold-pins of your SSD is 7+17pins,it can't fit 12+16pin SSD from 2013-2015 macbook..
Check Stock

USB C 3.2 SSD Enclosure for 12+16 Pin MacBook SSDs for MacBook Pro 2013-2015, iMac 2013-2015, MacBook Air 2013-2017, Portable Aluminum SSD Adapter with Adjustable Indicator for MacBook SSD

  • 【MacBook SSD Enclosure】This SSD enclosure is compatible with Apple original Mac SSDs with 12+16 Pins, NOT compatible with Toshiba 12+16PIN SSD，NOT Support for NVMe SSD, SATA SSD..
  • 【 Extreme Speed Transmission】 Type-C to c 10Gbps high-speed transmission with USB 3.2 Gen 1 interface, the perfect solution for data transfer and data backup. One HD movie transfer only takes 2-5 seconds..
  • 【Aluminum Shell & RGB Design】This SSD adapter for Mac adopts an aluminum alloy shell, slim design, and durable and excellent heat dissipation. High-effective system protects your SSD from overheating when trading large files. Adjustable RGB Light shows the data transfer status, cool and nice touch..
  • 【Support Operating System】 Support System Multi OS, Windows, Mac OS, Linux, Android.Supports for 2013-2017 MacBook Air, 2013-2015 MacBook Pro Retina, 2013-2014 iMac, 2013 Mac Pro.
  • 【Easy Installation】JUST Unscrew the four fixing screws on the cover with a screwdriver and remove the cover from the SSD enclosure. Insert the SSD into the card slot, then close the case and tighten the screw. It allows quick and easy installation. play and plug..
Check Stock

WAVLINK USB C to M.2 NVMe SSD Enclosure, USB C 10Gbps to NVMe PCI-E M-Key Solid State Drive External SSD Case, Compact & Portable, for 2230/2242/ 2260/2280

  • 【Compatibility】Support M.2 NVMe SSD (PCI-E NVMe-based) in size 2230 / 2242 / 2260 / 2280, doesn’t support B-Key SSD(SATA-based) and M-Key M.2 SSD(PCI-E AHCI-based). Not support M.2 SATA SSD / any SSD from MacBook Pro/Air/iMac/Mac Pro..
  • 【Super-Speed Transfer】Both USB C support max. speed USB 3.1 Gen 2 10Gbps, actual testing speed near 500-800MB/s for read and write..
  • 【Safe and Reliable】Aluminum Alloy enhances heat dissipation, SSD heat sink and thermal pad included, cooling down internal NVMe SSD rapidly, more safe and reliable in using..
  • 【Easy to Setup】 No driver needed. Lightweight and slim size allows it to slip into your pocket, you can take it anywhere you need. Perfect companion for your efficient work..
  • 1xUser Manual. We provide 12 months warranty for this product..
  • 【In the Box】1xUSB3.1 Gen.2 to NVMe SSD Enclosure.
Check Stock

Lycom DT-120 M.2 NGFF SSD to PCIe x4 Host Adapter (Support M.2 PCIe 2280, 2260, 2242)

  • Lycom DT-120 M.2 NGFF PCIe based SSD works in main board PCIe x4 bus slot.
  • Supports PCIe Gen3 and PCIe Gen2 M.2 NGFF 80mm, 60mm, 42mm SSD.
  • Supports PCIe 1.0 ,PCIe 2.0 and PCIe 3.0 motherboard.
  • Note: this adapter is only for 'M' key M.2 PCIe SSD such as Samsung XP941 SSD. Not compatible with a 'B' key M.2 PCIe x2 SSD or 'B' key M.2 SATA SSD..
Check Stock

MANHATTAN SCSI ADAPTER DB50/HP F, DB25 M, IADAP SCSI -450

  • Universal IDE Hard Drive Adapter】Dual-Head IDE Connector (40pin and 44pin) plus one SATA II Connector. Support SATA 2.5"/3.5" HDD up to 10 TB, IDE 2.5"/3.5" HDD, DVD-ROM, CD-ROM, CD-RW, DVD-RW, DVD + RW Optical Drive. Allowed to operate three hard disk drives simultaneously..
  • 【SuperSpeed USB 3.0】Data transfer rates up to 5Gbps, backward compatible with USB 2.0/1.1. Support Windows XP/Vista/7/8/10 and Mac OS..
  • 【10 Gbps Ultra-fast Transfer】USB 3.2 Gen 2 M.2 SSD Enclosure can transfer large files to your computer within seconds with 10Gbps transfer speed. 32Gbps PCIE 3.0 connects to M.2 NVME SSD. Support UASP/Trim and maximize the data transmission..
  • 【Compatibility】Compatible for solid state drivers size 2242/2260/2280. Support Windows 7/ 8/ 8.1/ 10/ Linux/ Mac OS 10.10.5 or higher Version. The SSD enclosure is suitable for SSD based on M-Key and M+B Key NVME PCIE. NOT compatible with B Key NVME, M and B&M Keys SATA, PCIe AHCI SSD, mSATA SSD and non-M.2 form factor SSDs..
  • 【Safe and Stable】USB adapter built-in short-circuit, over-current and multiple protections to ensure the safety of your SSD and data. Better heat dissipation to keep the temperature in normal range, which will not damage the M.2 SSD..
Check Stock

Bejavr M.2 NVME to PCIe 3.0/4.0 x4 Adapter, NVME/AHCI SSD to PCIe Expansion Card with Aluminum Heatsink Solution, Supports PCI-Express X4 X8 X16 Slots

  • NVMe PCIe Adapter Apply to 2280/2260/2242/2230mm M.2 NVMe and AHCI SSD, Adapter with Aluminum Heatsink Solution..
  • M.2 PCIe Adapter Supports PCI-Express X4, X8, X16 slots. PCIe 4.0 lanes with up to 64Gbps bandwidth, backward compatible with PCIe 1.0 2.0 3.0, Full release the speed of PCIE 3.0/4.0 X4 Full Speed M.2 PCIe SSD, such as 64Gbps M.2 PCIe 4.0 SSD..
  • PCIe NVMe Adapter Supports Windows 11/10/8、Windows Server 2012 R2、Linux、Fedora、SUSE、Ubuntu、Red Hat（no driver required） NOTE: Go to NVMe SSD manufacture website for driver installation if your PC can not recognize NVMe SSD. Win7 and Windows Server 2008 R2 need additional driver for NVMe SSD..
  • PCIe NVMe 3.0/4.0 x4 Adapter with 2 thermal pads, You put one between the ssd and the carrier and one between the ssd and the heat sink..
  • Package Including: ➤1-M.2 PCIe Adapter x1.➤2-SSD Spare bolt（Pre-installed on PCB）.➤3-Low Profile Bracket x1.➤4-Screw Driver x1.➤5-Regular Profile Bracket x1.➤6-Heat conducting silica gel pad x2 （thick + thin）.➤7-Aluminum Heatsink x1.➤8-Heatsink fixing spring nails x2.➤9-PCB fixing screws x2.➤10-Bracket fixing screws x1..
Check Stock