Top Idler Arm Puller

Detroit Axle - Front Inner Outer Tie Rod Ends + Adjustment Sleeves + Pitman & Idler Arm w/2.5" Bolt Pattern Replacement for Ford Expedition F-150 F-250 4WD - 8pc Set

  • 4x4 Models ONLY! - 2.48" Idler Arm Bolt Pattern.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: (4) Inner Outer Tie Rod Ends + (2) Adjusting Sleeves + (1) Idler Arm + (1) Pitman Arm.
  • Detroit Axle Suspension components are ready to meet the rigorous demands of today's foreign and domestic passenger cars, trucks, and SUVs.
Check Stock

SCITOO 13pcs Front Suspension Kit All Model Front Upper Control Arm Lower Ball Joint for Silverado Sierra 1500 for Chevy for GMC Tie Rod Sway Bar 4 groove Pitman Idler Arm replacement auto parts

  • ...1500, 2000-2006 for Chevrolet Tahoe, 1999-2006 for GMC Sierra 1500, 2007-2007 for GMC Sierra 1500 Classic, 2000-2006 for GMC Yukon, 2000-2006 for GMC Yukon XL 1500.
  • 【INCLUDED COMPONENTS】 - 2x ES3488 Front Inner Tie Rod End,2x K6541 Front Lower Ball Joint,2x ES3493T Front Outer Tie Rod End,1x K6534 Front Steering Idler Arm - Heavy Duty,1x K6536 Pitman Arm - with 4 Grooves - Heavy Duty,2x K8987 Front Sway Bar End Link,1x K6723 Idler Arm Bracket Assembly and Grease,2x K80942 Front Upper Control Arm And Ball Joint with Standard Bushings.
  • 【WHEN TO REPLACE SUSPENSION KIT】 - ①Steering noise such as snapping, popping, creaking or groaning sounds when turning.②Feeling every bump:Suspension noise such as clunking, rattling or popping on rough roads.③Difficulty when steering: ”Memory steer” or poor steering return where the car doesn’t want to go straight after ­turning due to binding in the upper mount..
  • 【SUSPENSION KIT BUYER'S GUIDE】 - A Suspension Kit is basically a collection of parts that are used to restore, replace, or modify a vehicle's suspension system.this suspension auto parts directly replaces the original assembly on specific vehicle applications,easy installation and steering alignment.A complete suspension kit typicall....
Check Stock

Detroit Axle - 4WD Front Ball Joints + Sway Bars + Tie Rods Suspension Kit Replacement for Cadillac Chevy GMC Escalade Yukon Tahoe K1500 K2500 K1500 Suburban - 15pc Set

  • Replacement For 4WD Models w/45.79mm Diameter Lower Ball Joint.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: (2) Front Upper Ball Joints, (2) Front Lower Ball Joints, (2) Front Sway Bar Links, (2) Outer Tie Rods, (2) Inner Tie Rods, (2) Tie Rod Adjusting Sleeves, (1) Pitman Arm, (1) Idler Arm and (1) Idler Arm Bracket.
  • Detroit Axle Suspension parts are ready to meet the rigorous demands of today’s foreign and domestic passenger cars, trucks and SUVs.
Check Stock

Detroit Axle - 4WD Power Steering Gearbox Idler & Pitman Arms Tie Rods Replacement for Silverado Suburban Avalanche Sierra 1500 Escalade - 8pc Set

  • Fits 4WD Models with Torsion Bar Suspension.
  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 1x Power Steering Gearbox + 2x Idler & Pitman Arms + 4x Inner & Outer Tie Rods + 1x Front Idler Arm Bracket.
  • To Activate your Lifetime Warranty, you must send in your core unit. Call us when you order to get a return shipping label for your old unit.
Check Stock

Dixie Chopper Belt Idler Arm for Lawn Mowers / 30223DC, 30223, 30223-87,

  • Dixie Chopper Idler Arm for Dixie Chopper Lawn Mowers / Dixie Chopper Part # 30223DC.
  • Models It Fits: Dixie Chopper Lawn Mowers: 2550, 2750, 2760, 3060HP, 3360HP, 3372HP, LT1800-34, LT1800-44, LT2000-50, LT2000-50D, LT2500-44D, LT2500-50D, LT2700-60D, LX2000, LX2001, LX2400, LX2401, RB2700-34, RB2700-44, RB2700-50, SE2550, SE2750, SE2760HP, Whiz-Mow, X1701-50, X2000, X2001-50, X2002-50, X2003-50, X2200-50X, 2202-50, X2303-50, X2400, X2500-50, X2502-50, X2503-50, X2703-60, XF2200-50, XF2200-60, XF2300-50, XF2500-60, XF2700-50, 5018, 5020, 6024.
  • Specs: Please verify the original part number inyour owner's manual or on the appropeiate parts diagram of your model for correct location and fitment of this item.
Check Stock

AUTOSAVER88 -Front Suspension Steering Kit Compatible with 1999-2006 Chevy Avalanche Suburban Silverado 1500 Tahoe, GMC Sierra 1500 Yukon, 2000-2006 Cadillac Escalade. Torsion Bar Suspension Only

  • Vehicle fitment: : 6-Lug Models Only, w/Torsion Bar Suspension.
  • Exclude Heavy Duty models. Please confirm your vehicle details by VIN, and check your vehicle in the fitment filter system.
  • Package content: 2x complete front upper control arm, 2x front lower ball joint, 2x front sway bar link, 2x front outer tie rod, 2x front inner tie rod, 1x pitman arm (with 4 grooves), 1x front steering idler arm and 1x idler arm bracket assembly.
  • Improve ride comfort: Pre-installed rubber bushings effectively help reduce the road noise and vibration, enabling you to enjoy a smooth and controlled ride during cornering and over bumps.
  • Manufactured to strict standards: E-coating adds corrosion protection and promotes a longer service life. The high-strength steel body makes it more stable during operation. All parts are rigorously tested to provide reliable replacement.
  • Installation notes: The suspension kit must be installed by professionals who need to carefully read important instructions shown in the picture. Please test in an empty area before getting back on the road.
Check Stock

Lisle 41900 Pitman Arm Puller

  • Puller body is drop-forged and heat-treated for strength.
  • Designed to work on even the most stubborn Pitman arm pulling jobs.
  • Position puller jaws over Pitman arm and turn center screw to free Pitman arm.
Check Stock

Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment, Sheppard M110 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10389

  • Tiger Tool's 10389 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M110 gearboxes..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
  • This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool..
  • Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
  • The Tiger Tool Pitman Arm Puller for Sheppard M110 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
Check Stock

Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment, Sheppard M100 Pitman Arm Tool Set for Class 6-8 Transportation Trucks, 10385

  • The Tiger Tool 10385 Pitman Arm Puller tool easily and efficiently removes even the most stubborn and difficult pitman arms on the Sheppard M100 gearboxes..
  • Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
  • This Heavy Duty Pitman Arm Puller Tool eliminates dangerous hammering and cutting torch methods that have been used in the past, ensuring your safety with each and every use. This tool is made from high strength steel casting which is designed for high capacity pulling, allowing strength, power, as well as durability in your tool..
  • Tiger Tool has made this pitman arm puller easy to use as it is simple to slip on for instant results, saving each mechanic and technician time and labor..
  • The Tiger Tool Pitman Arm Puller for Sheppard M100 Commercial Heavy Duty Trucks and Equipment is proudly made in North America to ensure you have what it takes to get the job done right..
Check Stock

CNWOOAIVE Windscreen Wiper Arm Puller Car Windshield Wiper Arm Removal Tool Glass Mechanics Puller

  • Function - Used to remove wiper arms on many domestic and foreign cars and light trucks..
  • Advantage - Will not damage the wiper arm or hood fairing during disassembly..
  • Features - It will help you to remove the wiper arm easily..
  • Application - The wiper arm can be removed from many foreign and domestic cars and light trucks. But it does not apply to all types of cars..
  • Instructions - Simply place the puller's feet under wiper arm. Tighten the puller to force the screw against the wiper shaft to remove the arm..
Check Stock

Detroit Axle - 17pc Front Upper Lower Control Arms, Wheel Hubs, Inner Outer Tie Rods, Center Sway Bar Links, Pitman Idler Arms for 2000-2003 Ford F-150 4WD w/ 3.43″ Bolt Pattern 5 M14 Studs w/ABS

  • Kit Includes:4x Front Control Arms, 4x Front Tie Rods, 2x Front Adjusting Sleeves, 2x Front Sway Bar Links, 2x Front Wheel Hub & Bearings, 1x Front Center Link, 1x Front Pitman Arm, 1x Front Idler Arm.
  • Flange Type: 3-Bolt Triangular | Lug Count: 5 | Abs Type: Sensor Wire.
  • Detroit Axle is a leading supplier of ride control products to OE vehicle manufacturers Nationwide, that expertise translates to Detroit Axle's OE-quality.
Check Stock

OEMTOOLS 26554 Front End Service Kit, 5 Piece, Tie Rod Removal Tool, Pitman Arm Puller, Ball Joint Separator, Easy Part Removal for Popular Vehicles

  • Performance: Strengthened steel alloy construction for powerful and reliable operation, even on stuck or seized parts.
  • Safely and easily extracts Pitman arms, tie rods, and ball joints.
  • Compatibility: The 5 adjustable front end service tools fit hundreds of makes and models, including most American, European, and Japanese vehicles.
  • Domestic and imported cars and light trucks.
  • Convenience: Never miss a job when you have the right front end tools on hand.
  • High-quality plastic carrying case maximizes organization, storage, and transportation.
  • Simplicity: The processes to remove Pitman arms, tie rods, and ball joints are outlined in the included manuals.
  • Easy to follow instructions in both English and Spanish.
  • Specifications: 1 Ball Joint Puller, 1 Heavy Duty Tie Rod Puller, 1 Pitman Arm Puller, 1 Pitman Arm/Tie Rod End Puller, 1 Ball Joint/Tie Rod End Puller, 1 Carrying Case.
Check Stock