Top Idler Bearings

iBroPrat 1 Sets Trailer Hub Kit 5 Bolt 4.5, Trailer Axle Kit for 3500 lb 5 Lug Trailer Hub with Extra Dust Cap and Rubber Plug Fits 1-1/16'' to 1-3/8" Trailer Axles 3500lb #84 Spindle

  • ...s.Protect the small size with the large size.Packed in a heavy duty box.Effectively avoid damage due to parts colliding with each other in the box..
  • 【LUXURY KIT WITH EXTRA ACCESSORIES】This trailer hub kit includes 16pcs accessories units such as Idler hub, L44649 outer bearings, L68149 inner bearings, etc.It even includes Shaft Nuts, Shaft Washers, Cotter Pin.WITH EXTRA 1PCS DUST CAPS & 2PCS SEALS..
  • 【HIGH QUALITY】The hub is made of high quality carbon steel.Paint the surface to prevent rust.8.6 pounds also shows how heavy it is..
  • 【SIZE & QUANTITY】1PCS Hub(5 bolt 4.5 for 3500lb), 1PCS L44649 outer bearings (I.D: 1-1/16''), 1PCS L68149 inner bearings (I.D: 1-3/8''), 5PCS Lug nuts (1/2''-20 thread), 1PCS Washer(I.D: 1"), 1PCS Spindle nuts(I.D: 1"), 1PCS Cotter Pins(L: 2.25"), 2PCS Dust cap (O.D: 1.98''), 2PCS Rubber Plug (2.56" O.D - 1.72" I.D). Please check the image..
Check Stock

Loctite 2301375 680 High Strength Bearing Mount For Relaxed Fits, O.E.M. Specified, 36-mil Bottle

  • QUALITY. High strength, medium viscosity anaerobic adhesive for slip fit assemblies..
  • APPLICATIONS. Replaces set screws, clamp rings, snap rings, wheel bearings, idler shaft, fit bearings..
  • FORMULATED. Selection of viscosity, gap-filling ability, flexibility and strength characteristics..
  • RESULTS. Seal joints to stop leakage and prevent fretting and corrosion..
  • EASY TO USE. Adheres in 10 minutes at room temperature..
Check Stock

Valvoline Multi-Vehicle Moly-Fortified Gray Grease 14.1 OZ Cartridge

  • CRC INDUSTRIES: A market leader that offers impeccably designed chemical solutions to maintain, protect and repair different marine, heavy-duty motor vehicles, industrial-grade engines, household tools, and electrical equipment.
  • DRILLER RED GREASE: This NLGI #2 Red Grease protects heavy-duty drilling, industrial, mining, and construction equipment from wear and corrosion..
  • FORMULA: This heavy-duty red grease has a Lithium Complex base formula for superior protection and lubrication..
  • APPLICATIONS: Driller Red Grease is ideal for drilling and mining applications, backing plates, ball and chassis points, construction ball & roller bearings, idler bearings, industrial applications, U-joints, water pumps, wheel bearings, and more..
  • SPECIFICATIONS: Driller Red Grease is available in a 14 wt oz. cartridge..
Check Stock

Belt Grinder 2x72 Wheel Set Knife Grinder 4 Drive 5/8 bore 4 Track 2 Idler 4,5/8-4 - 2

  • CNC Machined Aluminum Wheel set for Belt Grinders.
  • 3 x Heavy duty ½” Bearings fitted Back to Back in each wheel for max bearings life.
  • 3” long, ½” Bolt (Not included) is required to mount idler and tracking wheels.
Check Stock

Belt Grinder 2x72 Wheel Set Knife Grinder 5' Drive 5/8' bore 4' Track 2' Idler (5' 5/8-4' - 2')

  • CNC Machined Aluminum Wheel set for Belt Grinders.
  • 3 x Heavy duty ½” Bearings fitted Back to Back in each wheel for max bearings life.
  • 3” long, ½” Bolt (Not included) is required to mount idler and tracking wheels.
Check Stock

Belt Grinder 2x72 Wheel Set for Knife Grinder 5' Drive 5/8' Bore 3' Track 2' Idler (5' 5/8-3' - 2')

  • CNC Machined Aluminum Wheel set for Belt Grinders.
  • 3 x Heavy duty ½” Bearings fitted Back to Back in each wheel for max bearings life.
  • 3” long, ½” Bolt (Not included) is required to mount idler and tracking wheels.
Check Stock

ACDelco Gold 6K960 Standard V-Ribbed Serpentine Belt

  • ...your worn serpentine or V-belt idler and tensioner pulleys, turn to Dayco. Constructed from spun steel or wear-resistant plastic with specially formulated glass-filled polymers, these pulleys feature smoother surfaces and tighter dimensional tolerances to reduce vibration and therefore prolong belt life. Lubricated bearings and high temperature seals assure peak performance, the most critical element of a pulleys service life.
  • EXTEND SERVICE LIFE: Developed and designed using state-of-the-art three dimensional computer aided design (CAD) and finite element analysis (FEA) to ensure the optimal design and maximum structural integrity. Built to last, the Idler Pulley has superior resistance to dirt, salt, chemicals, and other under-the-hood contaminants.
  • RELY ON QUALITY AUTO PARTS: Dayco's essential engine parts and drive system solutions offer engine economy, efficiency, and exceptional performance while minimizing noise, vibration, and harshness. They strive to be first-to-market with built-to-last products such as high-quality engine timing belts, serpentine belts, drive belts, belt tensioners, and more.
  • TRUST IN DAYCO: Dayco is a global leader in the automotive parts manufacturing industry and has built a reputation for high-quality Dayco belts since 1....
Check Stock

Detroit Axle - 4WD 8-Lug Front Axle + Wheel Hub Bearing + Upper Control Arm Ball Joints Suspension Kit Replacement for Silverado Sierra 2500 HD 3500 Hummer H2

  • Fits: Specific Models - Check Fitment Chart and Product Description for Accurate Information.
  • Kit Includes: 2x Front CV Axle Drive Shaft + 2x Front Wheel Hub & Bearings + 2x Upper Control Arm w/ Ball Joints + 2x Lower Ball Joints +2x Sway Bars + 4x Inner and Outer Tie Rods + 2x Idler Arm & Pitman Arm + 1x Idler Arm Bracket.
  • Hub Specifications: Position: Front Left and Right | Drive: 4WD | Lugs: 8 Bolts | ABS Type: Sensor Wire | Flange: 4-Bolt Square.
Check Stock

Rockwell American Tandem 5,200 lb Electric Brake Trailer Axles w/Springs, Ubolts & Hanger Kit (95\ Hubface, 80\ Spring Center) 6 Lug 5.5\ Bolt Pattern

  • Complete Rockwell American 3,500 lb Idler Axle - Made in the USA.
  • Idler Axle with Hubs, Bearings, Lugs & Nuts (2 Year MFG Warranty) & (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - contact Johnson Trailer Parts).
  • Replaces Dexter, Al-ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture. Search "Rockwell American or Johnson Trailer Parts" in Amazon search bar for more Trailer Parts.
Check Stock

(New) 2- Trailer axle Spring Perch/seat for 1-3/4\ 2000# Round Axel Tube Mount Pad + Check All Models in The Description

  • Rockwell American 3,500 lb Idler Axle - Made in the USA.
  • This Axle Kit Includes: (1) 3,500 lb Idler Axle w/ Hubs, Bearings, Lugs & Nuts (2 Year Manufacturers Warranty), (2) Leaf Springs, (1) U-Bolt Kit, (1) Hanger Kit, (1) 32 oz Johnson Trailer Parts Insulated Mug.
  • This Axle Comes with a Superior Powder Coated Finish and Posi-Lube Spindles that Provide Continuous Bearing Protection.
  • 5 Lug on 4.5 Bolt Pattern (other bolt patterns available - Contact Johnson Trailer Parts).
  • Replaces Dexter, Al-Ko & TK Trailer Axles. This Axle Kit is Available in the Sizes Shown in the 3rd Picture, Search "Rockwell American or Johnson Trailer Parts" in Amazon Search Bar for more Trailer Parts.
Check Stock

UPGRADED Pulley Belt Parts for samsung Dryer 6602 001655 Dryer Belt and DC93-00634A Idler Pulley [Enhanced ],DC61-01215B Tension Spring,Replacement dv45h7000ew,dv48h7400ew,dv42h5000ew,dv48j7700ew

  • 【Pulley for Samsung Dryer Include】: 1 * UPGRADED DC93-00634A Samsung Dryer Idler [Dual Ball Bearings], 1 * UPGRADED 6602-001655 Dryer Belt[Double....
  • 【Superior Compatibility】: Fit Model Samsung Dv45h7000ew A2, Dv42h5000ew A3, Dv42h5200ep A3, Dv45k7600ew A3, Dv48h7400ew A2, Dv45k6200ew A3, and....
  • 【Premium Quality Product】: 6602 001655 Dryer Belt is TWICE as thick as it was before, made of black rubber, non-cracking, high wear resistance ,....
  • 【Parts Replacement 】: DC93-00634A Samsung Dryer Idler replaces AP6038887, DC96-00882B, DC96-00882C, PS11771601, AP4213616, PS4216837 dryer idler....
  • 【100% Satisfaction Service】: For whatever reason, you are not satisfied, you can request a replacement or a full refund. Customer satisfaction is....
Check Stock

LIBRA Trailer 5 Lugs Idler Hub Kits 5 on 4.5 5x4.5 for 3500 lbs Axle 22017K Pack 2

  • Set of 2 New trailer idler hub kits 5 on 4.5 for 3,500 lbs trailer axle.
  • Bolt pattern: 5 on 4.5", bearing races and 1/2"-20 studs installed.
  • Kits also includ: 2x L68149 inner cone bearings and 2x L44649 outer cone bearings, 2x Grease seals 1.719" x 2.565", 2x E Z lube grease caps with rubber plug.
  • Libra Trailer Parts has been supplying US trailer manufacturers OEM parts 15 years..
Check Stock