Top Ikea Screws And Bolts

JINHONGRUI License Plate Screw Bolt- Stainless Steel Car Tag Fastener with Skull Cap Covers, Rustproof Decorative Ghost Head Logo Front Rear Frame Mounting Hardware

  • LICENSE PLATE SCREW ASSORTMENT KIT- This license plate mounting hardware kit contains 4 different types and sizes of screws and bolts: M6*10mm short bolts, M6*25mm extended long phillips bolts, M6*20mm self-tapping screws, and M6*20 anti -theft mechanical bolts. Bulk screws with nylon plug-in or metal lock nut, meet the needs of front and rear license plate mount.
  • PERSONALIZED SKULL SCREW CAP COVER- The black license plate screw cap with ghost head logo, each skull sticker is printed on high quality automotive grade vinyl gel with high resolution graphics, is a very cool decorative car accessory for motorcycles, cars, trucks, trailers..
  • RUSTPROOF STAINLESS CAR TAG BOLTS- Using 304 stainless steel, this is one of the materials with highest rust and corrosion resistance. The silver chrome screws are uncoated, keep the license plate cool, clean and tidy. Including self-tapping screws, machine bolts, insert retainer and nut, complete license plate fasteners can easy fasten the tag plate frame cover..
  • ANTI-THEFT, RATTLE PROOF- 4 pcs Hexagon socket head anti-theft metric bolts with the special screwdriver, security screws can keep the thief away from your car. The black foam license plate pad is pasted on the back of the metal license plate, can reduce the vi....
Check Stock

LEG DADDY 7\ Dark Walnut Tapered Pyramid Sofa Leg, Set of 4 (5/16\)

  • Hanger Bolts Available: 5/16" (most furniture made in USA), M8 (IKEA and Europe), and M10 (Europe). Please contact us if you are unsure..
Check Stock

Loboo Idea Speed Out Screw Extractor Drill Bits Tool Set Broken Damaged Bolt Remover Guide Set Broken Easy Out Fastener Kit (5 Pieces, HSS 4341# Silver)

  • Designed for Screw & Bolt Extracting: Each bit has dual head designs, one is used to drill a hole in the middle of the the damaged screws or bolt with the drill end, the other is used to extracting it. The special design helps you grab and remove the screws precisely and easily in 10 seconds or less..
  • H.S.S 4341 Material: Loboo Idea stripped screw extractor is made of high quality H.S.S 4341 material, has 63-65 HRC hardness which is harder than most of other similar products. Durable and solid, suitable to removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts. Best gift for any craftsman..
  • Multi Purpose: 5 different sizes of bits (#0, #1, #2, #3, #4) are included in package of stripped screw remover kit and #0 is a gift provided for extra using. All is for ensuring that the screw extractor kit can meet all of your needs. Great for removing stripped, broken head, rusted, unscrew, free-spinning and deck screws or bolts..
  • Easy to Use: 3 simple steps: 1. Drill out, 2. Flip Bit, 3. Extract. Just no other tools needed but a drill, select a smaller bit than the damage screw, you can easily remove the screw. Note: please make sure to run the drill in reverse during the process..
  • Wide Application: The screw and bolt ....
Check Stock

SZHKM 62PCS Furniture Bolts and Nuts Crib Screws Hardware Replacement Kit,M6 Barrel Nuts for Cribs and Bunk Bed

  • 【Quantity】SZHKM 62PCS m6 crib bolts replacement set, which include M6 bolts 30mm,40mm,50mm,60mm,80mm, five models. The furniture screws include....
  • 【Widely used】SZHKM bunk bed bolts and nuts very suitable for professionals, amateurs, landlords, workers, repairmen, carpenters, construction....
  • 【Materials】 The M6 kit crib screws and bolts replacement Furniture screws are made of high-grade zinc plated carbon steel, with high hardness,....
  • 【Exquisite workmanship】Our furniture hardware m6 kit crib parts replacements furniture screws are very smooth, sharp and accurate. It is not easy....
  • 【Environmental protection material】SZHKM m6 crib screws and nuts are made of high quality carbon steel, environmentally friendly, mercury-free and....
Check Stock

IKEA Kallax 4 Shelving Unit Black-Brown

  • Hardware kit for IKEA KALLAX 703.015.42 Shelf Unit..
  • Contains all 8 screws and 80 wooden dowels needed for assembly..
  • Compatible with the 5 x 5 Shelf Unit that measures 71-5/8" x 71-5/8".
  • Not compatible with EXPEDIT. If your shelf is older than June 2014, it's an EXPEDIT. KALLAX dowels are thinner, and screws shorter than for the EXPEDIT. Please verify before purchase..
Check Stock

Disney Lady Plush – Lady and The Tramp – Medium – 11

  • Different Sizes: 8 Pieces heavy duty steel extractor，different sizes of screw extractor to meet different needs..
  • Material: Made from carbon steel and are tempered twice for extra hardness and durability..
  • Application: Works on wood and machine screws, as well as flat, hex, or painted over screws..
  • Advantages: Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings..
  • Other: It can remove some of the common screwdriver can not be disassembled damaged bolts, screws, bolts and pipes..
Check Stock

Crib Screws Bolts Replacement Hardware Parts Kit M6x75 65 55 50 35 20 16mm Crib Bolt Barrel Nut Compatible with Graco Benton Cribs Dream On Me Chelsea Carson Classic Synergy Cribs DaVinci Kalani Cribs

  • Metric M6 replacement Crib Screws for your missing baby crib bolts..
  • This crib screws hardware kit contains 16mm bolts, 20mm bolts, 35mm bolts, 50mm bolts, 55mm bolts, 65mm bolts, 75mm bolts, and barrel nuts (D x L: 9.8mm x 12.5mm, 9.8mm x 14.5mm)..
  • This baby bed crib screws hardware replacement kit is compatible with Graco Benton Convertible Crib, Dream On Me Chelsea Carson Classic Synergy Convertible Cribs, DaVinci Kalani Convertible Cribs..
  • Crib bolts and nuts are made of carbon steel, they are solid replacements parts for your crib..
  • There are many types of cribs and there are many different lengths and sizes of bolts to assemble a crib, if you do not know whether this kit will work for your crib, reach out to us for support..
Check Stock

8Pcs Screw Extractor Set, Easy Out Damaged Screw Extractor Kit, Bolt Water Pipe Remover Set, with Storage Case.

  • 8 piece Screw Extractor -can Easy Out Damaged Bolt Extractor Kit Stripped Broken Screw Remover Set, different sizes of screw extractor to meet different needs..
  • Screw Extractor Kit Made from carbon steel and are tempered twice for extra hardness and durability. Screw Extractor Works on wood and machine screws, as well as flat, hex, or painted over screws..
  • Remove Damaged Screws Bolts And Water Pipes – These extractors will remove most kinds of damaged, stripped, rusted, broken, or stuck screws from any wood or metal surface with relative ease. The new two water pipe extractors, designed for the broken water pipes..
  • Screw Extractor can remove some of the common screwdriver can not be disassembled, damaged bolts, screws, bolts and pipes.Reverse thread bits easily remove screws, bolts, studs, and threaded pipe fittings..
  • Screw extractor size includes #1 for 1/8″-5/32″ , #2 for 5/32″-3/16″, #3 for 3/16″-1/4″, #4 for 1/4″-5/16″, #5 for 5/16″-7/16″, #6 for 7/16″-9/16″, 7# for9/16″-3/4″, 8# for 3/4″-1″..
Check Stock

Glarks 204Pcs M8 Metric 304 Stainless Steel Phillips Round Head Machine Screws Hex Socket Head Cap Screws and Hex Head Screw Bolts with Hex Nuts Flat Washers Lock Washers Assortment Kit

  • ➤[Package Includes]: You'll receive 204pcs M8 screws, nuts and washers in total, which are 17pcs Phillips round head machine screws, 17pcs hex socket head cap screws, 17pcs hex head cap screw bolts, 51pcs hex nuts, 51pcs flat washers and 51pcs lock washers. This set with different types of screws and washers can be applied to various occasions, enough for your daily use..
  • ➤[High Quality Material]: All of our screws, nuts, bolts and washers are made of 304 stainless steel, which features high strength, shiny look, premium rust, corrosion and oxidation resistance, can perform well even in bad environment. This 304 stainless steel set selects elaborately high quality fittings to give you best experience..
  • ➤[Size Details]: Our round head machine screws, hex socket head cap screws and hexagon head bolts are in 4 different sizes: M8 x 15, M8 x 25, M8 x 35, M8 x 40, and come with M8 flat washers, M8 lock washers and M8 hex nuts. This set covers most commonly used size of M8 screws and bolts, will become good helper for you in repairing or replacing work..
  • ➤[Great Workmanship]: These screws and bolts design with high precision, compact and clean thread to achieve tight connection, not easy to fall off and loosen, smooth thread are easy to install withou....
Check Stock

Crib Screws and Bolts Replacement-M6 Bolts Nuts Hardware Kit for Baby Crib Bed Cot Bunk Furniture Assembly 16mm 20mm 30mm 40mm 45mm 50mm 55mm 70mm 75mm 85mm with M6 Barrel Nuts (16MM-85MM)

  • M6 crib screws bolts nuts are made of carbon steel, they are solid hardware replacements for most cribs, beds, Cot, Bunk, tables, chairs, or workbenches, DIY projects, furniture, etc..
  • This Baby Bed Crib Screws Bolts Hardware Kit includes M6 x 16mm 20mm 30mm 40mm 45mm 50mm 55mm 70mm 75mm 85mm bolts and barrel nut (9.8mm x 11mm 12.5mm 14.5mm), 10 sizes bolts and 3 sizes barrel nuts, they fit most cribs, beds, tables, chairs, or workbenches, DIY projects, etc..
  • Buy this crib hardware kit, you will get 5pcs*16mm bolts, 5pcs* 20mm bolts, 5pcs*30mm bolts, 5pcs*40mm bolts, 5pcs*45mm bolts, 5pcs*50mm bolts, 5pcs*55mm bolts, 5pcs*70mm bolts, 5pcs*75mm bolts, 5pcs*85mm bolts and 15pcs* (9.8mm x 11mm, D x L) barrel nut / 15pcs* (9.8mm x 12.5mm, D x L) barrel nut / 20pcs* (9.8mm x 14.5mm, D x L) barrel nut, and a free hex wrench..
  • This Bolts nuts screws kit come in a clear plastic box, it is convenient to store the bolts and nuts and easy to take the right size bolts and nuts..
  • IMPORTANT: Please measure the size of the holes that the bolts fit in before purchase, bolts in this kit are M6, please check the lengths of the bolts you will need and confirm the size you will need to ensure you are ordering the proper size. // NOTES.
  • when specifying the length of a heade....
Check Stock

La Cumbia De Los Tornillos Y Tuercas

  • √ [Larger Quantity: 1260 Pieces, Various M2 M3 M4 Screws with Nuts and Flat Washers Meet All Demands] Nice set screw assortment kit. M2: Bolts are in 7 lengths: 4mm, 6mm, 8mm, 12mm, 16mm, 20mm, 25mm. Each length 20 x bolts.
  • 140 x M2 Washers. M3: Bolt length: 4mm, 8mm, 12mm, 16mm, 18mm, 20mm, 30mm. Each length 20 x bolts.
  • 140 x M3 Washers. M4: Bolt length: 6mm, 8mm, 10mm, 14mm, 18mm, 20mm, 30mm. Each length 20 x bolts.
  • √ [21 Sizes More Choices, Custom 7 Lengths for 1 Model, Screws Assortment Accord with Standardized Metric System] Different size of M2 M3 M4 screws and nuts total 1260pcs. The average error is less than 0.01mm..
  • √ [High Quality 12.9 Grade Alloy Steel. More Than 20 Years of Experience in Fastener Tool Production] Nice Screws assortment, durable nuts and bolts. Extraordinary Technology & Professional & Durability..
  • √ [Please Note: Add a Little Anti-Rust Oil To The Product, In Order To Be More Durable] It's Anti-Rust Oil, Not Rust. Each screw is packed separately in a transparent bag, and then put in the box to avoid confusion. Storage: Assorted screws all are stored in one storage bin box, easy and convenient for storing and carrying, in case of missing or ....
Check Stock

11 Degree Angled Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate M8 Sofa Legs with Hanger Bolts,Screws,Set of 4

  • 11 DEGREE ANGLED.Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 11 DEGREE ANGLED.Your chair woods need NOT to cut in 11 degree in order to fit the mounting plates..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock