Top Impregnated With Ptfe
Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft
- ...dapter fitting*2, AN6 to 3/8"quick disconnect male*1,6AN to 5/16" hose adapter fitting*1..
- 【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
- 【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
- 【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
- 【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..
Check StockVeto MP1 (Multi-Purpose Small Pouch)
- 11 vertical pockets, Electrical tape strap, Snap-over belt loop, Stainless tape clip, 2-D rings, Back pocket "stuffer blocker".
- Waterproof Body Fabric: 1200 PVC Impregnated Denier Nylon, Waterproof Tool Pocket Fabric: 1200 PVC Impregnated Denier Nylon.
- Treated Cow Leather, D-Rings: Powder Coated Steel.
- Rivets: 38 zinc, marine grade rivets, Stitching: Industrial Strength Double Nylon Stitching.
- Warranty: 5 Years (see Veto warranty terms and conditions).
Check Stock10FT 6 AN 3/8\ Nylon Stainless Steel Braided PTFE E85 Tube Fuel Line Fittings Kit with 6PCS Swivel Fuel Hose Fitting Adapters
- 【High Quality】This hose features an PTFE inner layer which is compatible with E85, wrapped by a single layer of stainless steel and nylon. These lines do not deteriorate or swell over time due to E85 use like non-PTFE fuel line. PTFE fuel line holds up a lot stronger to heat and extreme circumstances than the nylon braided fuel line..
- 【Application】The fuel line is widely used in fuel system, transmission system and cooler system and can be compatible with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel, and etc..
- 【Package Includes】The 6an nylon and stainless steel braided PTFE fuel line kit includes: 6pcs 6an PTFE hose ends (2pcs straight, 2pcs 45 degree, 2pcs 90 degree) and 3/8 PTFE braided fuel line (Length:10ft/3M)..
- 【Work Condition】The 6an PTFE hose working temperature range: -76℉ to 446℉ (-60℃ to 230℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 3000 psi. Bursting Pressure (psi): 10000psi..
- 【Service】100% satisfaction guarantee, If you have any issues with the part , simply contact customer service for troubleshooting help, parts, replacement, or refund. Our aim is to make you satisfy the parts and the service we provide for you..
Check StockWATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided
- ...ck nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
- 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
- 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
- 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
Check StockHORSESHOE ID 3/4\ X OD 1-3/8\ Wheel Barrow Hand Truck Lawn Mower Wheel Replacement Grease Bushing Bearings - 4 Pack
- 3/4"-Inch Wheel Grease Bushing Bearings - Qty 4.
- Made of Tough Oil Impregnated Steel - Free Hubcaps - Wear Resistant.
- No Need to Grease - When Axle Rolling, the Grease Oil will infusing from Oil Impregnated Steel.
- Ideal for Heavy Duty Loads, Every Day Use, Environments with Dust and Debris.
Check StockADVANGENE Syringe Filter Sterile, PES, 0.22um, 13mm (75/pk)
- HYDROPHOBIC PTFE SYRINGE FILTERS - Virgin PP housing with Hydrophobic PTFE membrane. Diameter: 13mm, Pore Size: 0.22μm, 100Pcs..
- UNIFORM PORE SIZE - PTFE Syringe Filter with uniform pore size, high porosity, and high retention efficiency..
- PREMIUM PERFERMANCE - It Can be autoclave, sterilize at 121°C/249.8℉ for 45 minutes, it with broad chemical compatibility and strong chemical stability and inertia..
- STURDY & DRUABLE - The syringe filters fit well, securely and durable, have reasonable flow for the filtration size, PTFE syringe filters are wall marked, when working with different requirements for filtration to be able to quickly discern which ones are being used..
- APPLICATION WIDELY - PTFE Syringe filters are broadly used infiltration of various organic solvents, as well as the filtration of strong acid and strong alkali solutions, perfect for hydrophobic, even such as culture medium, liquid cultures and grain spawn jars..
Check StockTIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings
- ...resistance, and a professional and high-tech appearance..
- High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
- Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
- Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 degree PTFE Fitting x 2, AN-6 180 degree PTFE Fitting x 2..
Check StockOthmro PTFE Ball, 36mm/1.4\ Diameter, Ground Finish, Diaphragm Pneumatic Pump White, 3pcs
- [Features]-PTFE can resist most chemicals, usually high temperature resistance, and has a low friction, non-stick surface, excellent electrical insulation properties, non-flammable, low water absorption..
- [Function]-Used for chromatographic column packing and mixing beads, PTFE balls can reduce the bumps when corrosive reagents boil..
- [Advantages]-Compared with other fluoropolymers (such as FEP and ETFE), PTFE can usually withstand higher temperatures..
- [Temperature Resistance]-PTFE is inert to most liquids and vapors, and can be used from -100 degrees Fahrenheit to 545 degrees Fahrenheit..
- [Wide Application]-PTFE balls are widely used in chemical, machinery, electronics, ball valves, electrical appliances, aerospace and other fields..
Check StockDremel 662 Diamond-impregnated Glass Drilling Bit, Rotary Tool Accessory with 3.2 mm Diameter for Drilling and Cutting Glass
- Dremel accessory (662) diamond impregnated glass drilling bit is designed for straight or curved glass material.
- Impregnated with full diamond particles which offers superior long life and durability.
- Ideal for drilling holes in both flat and contoured surfaces eg glass or ceramic wall.
- Accessory length: 44 mm, Maximum recommended speed: 35000 RPM.
- Fits with all Dremel Multi-/Rotary tools or other 3,2mm shank size multi- / rotary tools.
Check StockChapin 8620B 150 lb Tow Behind Spreader with Auto-Stop, Red 8620B 150 lb Tow Behind Spreader with Auto-Stop
- Auto-stop dual impeller stops spreading when not in motion.
- Oil impregnated Bronze bearings minimize friction on axle and gear box.
- Easy-to-set gate adjustment with 11 incremental settings for accurate application.
- Gearbox with oil impregnated Bronze bearings and grease fitting.
- Heavy duty trailer hitch designed for professional use.
Check StockMECCANIXITY PTFE Lab Stirrer Bearing Adapter 21.5mm to 25mm Stopper for 8mm Diameter Shaft Stirring Rod
- PTFE Lab Stirrer Bearing Adapter is used for fixing electric stirring rods in a flask to stir a liquid or solution in the biology and chemistry field, research laboratory applications, etc..
- In the package of: 1 x PTFE Lab Stirrer Bearing Adapter.
- Made of PTFE material, corrosion-resistant and has good resistance to high temperature(temperature tolerance range:-180 °C~250 °C), smooth surface, easy to clean..
- It is detachable, comes with a sealing o-ring for good sealing performance. Easy to use, usually used with double-paddle PTFE electric stirring rod..
- Please check if this size is what you need..
Check StockAuthentic Capricorn Bowden PTFE Tubing XS Series 1 Meter for 1.75mm Filament with PTFE Teflon Tube Cutter and 2X PC4-M6 Extruder Fitting and 2X PC4-M10 Hotend Fitting
- Capricorn PTFE is well regarded as the highest quality PTFE tubing in all of 3D printing. The tight tolerances make sure that the filament is lead....
- Capricorn PTFE XS Series is rated for withstanding the highest temperatures in the market which is perfect for printing exotic filaments such as ABS,....
- Upgraded Pneumatic Fittings with metal teeth provided in this package work much better than the stock options provided by many cheap 3D printer....
- One PTFE cutter with an extra sharp razor is also included to ensure that the PTFE is cut flat on both sides to prevent any malfunctions or heat creep....
- 1 Meter in length PTFE tubing. F1RST LAYER is an authorized distributor of Creality and Capricorn 3D Printing products. Please contact us directly for....
Check Stock