Top In Line Attenuator

5 Pcs Fiber Optic attenuator, Fiber Signal Attenuation Converter Inserts Connector (FC-APC, 20dB)

  • 【Connector Type】 20dB attenuation amount, FC-APC Female to FC-APC male attenuator, adopting high performance attenuated fiber.
  • 【Operation Wavelength】This attenuator is suitable for both 1310nm and 1550 nm single mode fiber connection.
  • 【High Attenuation Precision】 Attenuation precision: ±10%, when connector attenuation amount003e5dB.
  • 【Transmission Stability】 Reflectance: dB≥50, which ensures the optical power stay in a stable level on its original transmission wave..
  • 【Easy Installation】 The simple and compact structure make it very user friendly, just need plug and play for installation.
  • 【Product Application】 Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation etc..
Check Stock

Hantek 20:1 Passive Attenuator for Pico 300v Max 10Mhz Passive Oscilloscope Signal Attenuator for Automotive Diagnostics Use,HT201

  • The HT201 has been designed to allow fuel injector and primary ignition waveforms to be measured using Hantek oscilloscope products..
  • Please note this attenuator should not be used for any high voltage measurements other than fuel injectors and primary ignition..
  • Passive attenuator with 20:1 attenuation, if input a 20V signal, it can output a 1V signal.Because the signal is attenuated, by using this item, oscilloscope can measure voltage higher than its range(±20V).
  • 【What you will get】 1 x HT201 Signal Attenuation.
  • 【Please Note】 After receiving the product, please check whether it is damaged. If you have any questions, please contact us in time. This product is a consumable and needs to be replaced regularly. Once the product is used, the warranty is not allowed..
Check Stock

USDR/USDX HF QRP SDR Transceiver SSB/CW Transceiver 8-Band 5W Ham Radio & Handhel Mic

  • 【IRF Tube】Using IRF series transmitting tube to ensure its being durable & can be used to connect to an antenna (instrument base)..
  • 【Lightweight&Cost-saving】The original QCX circuit is greatly simplified, and the installed components are reduced by 50 percent to save you the trouble of complicated transformer windings and wiring procedures..
  • 【Less Power Consumption】Thanks to the EER transmitter E-level, it boasts high power efficiency and no bulky heat sink is required..
  • 【DSP Function】Automatic gain control (AGC), noise reduction (NR), voice trigger, voice trigger Xmit (VOX), RX attenuator attenuator (ATT), TX noise gate, TX driver control, volume control, dBm/S-meter..
  • 【Quality Material Handling】Laser marking aluminum laser, aluminum knobs with translucent silicone buttons..
Check Stock

HMC472 Digital RF Attenuator Module DC-3.8GHz Parallel 0.5dB Step 31.5dB Attenuation Value

  • Attenuation Factor and Step Size :The HMC472 is a wideband 6-bit digital attenuator with an attenuation range of 0 to 31.5 dB and a typical step error of ± 0.25 dB..
  • Operating Frequency Range :Adopt QFN surface mount package, uses single power supply 5V, working frequency range from DC to 3.8 GHz..
  • Insertion Loss :Insertion loss is less than 2.0 dB (typical) and IIP3 is +54 dBm..
  • Objects Used :Suitable for a variety of RF and IF applications..
  • Attenuation Control Interface :Manually adjust the control through the 6-position pin header on the board..
Check Stock

1M-8G RF Power Meter Power Attenuation Set Digital Display Signal Strength Module Radio Frequency Power Meter

  • Large Range: The measuring power range of this RF power meter is -60～-5 dBm (External RF attenuator can be extended to 100dBm), and the frequency range is up to 8000MHz..
  • Specific Feature: The RF power meter is light, compact and convenient, with a measurement power resolution of 0.1 dBm, and an output interface SMA_K..
  • Clear Display: This RF power meter comes with an LED screen, the data is clear and straightforward, and it is easy to use..
  • Standard Structure: The precise mechanical structure of the RF power meter makes the measurement accurate, convenient and reliable..
  • Quality Assurance: The RF power meter has been inspected many times before it leaves the factory to confirm the quality..
Check Stock

Fender Groove Tubes GT-12AT7 Select Amplifier Tube

  • Preserve pumping tube tones at lower volumes.
  • Works on all 8 ohm amps 60 watts or less.
Check Stock

SaferCCTV 0.2 Db 950-2150MHz Range SF-95 Satellite Finder Meter for Directv

  • 2. 0.2 dB difference in 950 - 2150MHz range.
  • 3. LNB to REC connectors with a dB level control.
  • 4. With LNB/LNB higher than 60 dB, use a 5dB attenuator.
Check Stock

YDELEKS 50pcs Gold Plated Brass tag Board Turrets Posts Lugs FOR Tube Guitar Amp DIY

  • Preserve pumping tube tones at lower volumes.
  • Works on all 8 ohm amps 60 watts or less.
Check Stock

GW Instek GDS-207 Touch Screen Oscilloscope, Compact Digital, 70MHz, 2 Channels, 7\

  • 70MHz Bandwidth Selections, Two Input Channels, 1GSa/s Sample Rate, 1M Memory Depth Per Channel.
  • 7" 8000x480 Full Touch Panel Capacitive LCD Multi-Point Control, Landscape and Portrait Display.
  • 30,000 Consecutive Waveform Records Logging Function, Replay Measurement Results Any Time.
  • Built-in Engineering Calculator, SMD Resistance Coding, Color Coding Info, and Attenuator Calculation Application Software.
Check Stock

Ancable F-Type in-Line Coax Cable TV Signal Attenuator 6 dB 2-Pack

  • - Use in coaxial cable feeds to reduce signal levels..
  • - Fixes the problem of having too much signal strength..
  • - Combinations of attenuators may be used together to create the exact signal loss needed.
Check Stock

LC Fiber Optic Attenuator, singlemode, Female to Male, 2dB, Pack of 2

  • Insertion Loss: ≥10%, Return Loss: ≥50(dB).
Check Stock

2pcs/lot Hantek HT201 20:1 Passive Attenuator for Pico, 300v Max

  • 20:1 Attenuator,Designed for assisting automobile measurement..
Check Stock