Top In Line Flow Meter

0386-0849 Nitrogen Flow Meter 1/4 Inch SAE Flare Inlet and Outlet Connection 50PSI 0-75CFH Nitrogen Flow Indicator for Brazing

  • Easy to Use: this nitrogen flow meter has 1/4" female torch inlet connector and 1/4" male torch outlet connection, can be used with nitrogen-purging....
  • Nitrogen Flow Indicator: There is a float inside the flow meter, it can help you confirm whether nitrogen is flowing during brazing, providing low....
  • Precise Control: The th folw indicator can control the gas flow through the copper tube during the brazing process, the flow accuracy can reach 3-4....
  • Enhance Safety: This product provides extremely low flow through high precision gas control and has an overpressure safety relief rupture disc, so it....
  • Excellent Material: The valve body structure of The meter is made of brass, which is resistant to corrosion and rust, and is durable.
Check Stock

DAE MJ-100 1\ NSF61 Lead Free Potable Water Meter, Pulse Output + Couplings, Gallons

  • Horizontal mount with dial facing upward. For the water meter to be installed vertically with water flowing upward, please refer to DAE PD-100 (B08D7356MY), which can be able to be installed in any position, vertically or horizontally, dial facing upwards or downwards or horizontally, water flowing downwards or upwards..
  • Certified by NSF to meet ANSI/NSF 61 for material safety and ANSI/NSF 372 for lead free plumbing as defined by the US Safe Drinking Water Act. Factory Calibration Certificates available. DAE Controls LLC is a Minority Business. Please feel free to get the NMSDC Minority Supplier Certificate from DAE Controls Website..
  • Cloud Metering available (2nd picture) with DAE CC2030 Gateway. CC2030 will collect water usage from DAE AMR (for 16 meters) or AMR130AN (for 1 meter) and send them to cloud server through Ethernet. With PC, cell phone, the landlords can see real time data, monthly water usage & billing reports to their tenants. If there is abnormal usage (ex. Broken piping), an email alert will be sent to your cell phone. No IT guy required. Just connect wires as per a simple picture (see video) & ready to go..
  • Ready for use with CO-10 (Electronic Pulse Counter) or CO-10 KIT - An inexpensive remote reading solution (6th picture). Can also....
Check Stock

2 New Jandy Zodiac 2133 Pool Valve Grease Cup Kit Replacement Original Grey

  • Combined functionality of flow meter and check valve.
  • Clear, easy to read scale in GPM or optional LPM with key Velocity points.
  • Can be installed horizontally, vertically, upside down, and next to any elbow or other fitting.
  • Flowvis offers an average accuracy of 2.01% between 20-110 GPM and is NSF certified to 50 PSI.
  • Installs in-line, no saddle Clamps or flat rubber seals to corrode and no calibration is ever required.
Check Stock

YFIXTOOL 1\ Digital Turbine Flow Meter, LCD Digital Display Flowmeter, Gas Oil Fuel Flowmeter for Diesel, Kerosene, Gasoline, Aluminum Stainless Steel. Flow Rate of 10-100LPM(2.6-26GPM).

  • 【Wide Application】The digital turbine fuel flow meter can be used to measure diesel, gasoline, kerosene, methanol and so on. Suitable for the flow rate of 10-100LPM(2.6-26GPM)..
  • 【Multifunctional】Zero function, instantaneous flow, and cumulative flow readings on the display with the arccuracy of ±1%..
  • 【Convenient Use】The turbine flow meter can switch between liters, gallons, pints and quarts to meet your different needs..
  • 【High-Quality Materials】The flow meter is made of corrosion-resistant aluminum housing and stainless steel turbine, and have superior sturdiness and durability..
  • 【Warn】With 2 x LR03 AAA batteries, the circuit is stable, long-service life and high efficiency. Do not forget to remove the battery when out of use because it is long-working and can't be turned off..
Check Stock

Argon/CO2 Flow Meter Gas Regulator Compatible with Mig Tig Welder Regulator with 6.6FT Gas Hose 10 to 60 CFH Output Flow 0 to 4000 PSI - CGA-580 Inlet argon flow gauge welding regulator

  • ...rdy and durable, which can withstand harsh environments and have a longer life. Came with 6.6 Ft argon welding gas regulator hose and protective cover are made of impact-resistant composite material for safety and durability.
  • 【Wide Application】Idea choice for CGA 580 Tank Fitting. This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). So it will screw right into the Argon, Argon/CO2 tanks. IDEAL FOR Miller, Lincoln, Hobart, HTP, and most other welders! Idea choice for MIG TIG welding, cutting ,chemical and electronics industry.
  • 【Accurate Gas Flow Gague】Adjustable from 10 to 60 cfh (cubic feet per hour), and is indicated by a ball which moves up and down in the flow tube. 0-4000psi inlet pressure, easy-to-read bottle pressure gauge included, allowing you to view how much gas is left in the tank range 0 to 4000psi. Will fit both the female 9/16" x 18 nut or the male 5/8" x 18 fitting. It also comes with a standard 1/4" barbed fitting.
  • 【Good Design】Use economic style flow meter regulator and single stage piston design, combination of regulator and flow meter as one unit, compact lightweight construction, convenient for use. Argon Regulator is a ideal choice for professional TIG/MIG welding applic....
Check Stock

Leadrise Universal Electric Fuel Pump Kit 12V (2.5-4psi) Electric Fuel Pump, 2 Meter/6.56-Foot 5/16' ID Fuel Line, Fuel Filters and 10Pcs Hose Clamp

  • ★【Universal Electric Fuel Pump Kit 12V:】 Inline Fuel Pump Kit includes all the component you need: 2.5-4psi Electric Fuel Pump, 2 Meter/6.56-Foot 5/16″ ID Fuel Line, 1Pcs Fuel Filters and 10Pcs Hose Clamp. Fuel filters and hose clamps are required for the use of fuel line, with which can be used perfectly with the electric fuel pump..
  • ★【Electric Fuel Pump】Material: Copper Clad Aluminum, Inline Fuel Pump, Output Pressure : 2.5-4 psi, Voltage : 12 Volt, Flow Rate : 30 GPH, Hose Size : 8 mm ( 5/16 inch ).
  • ★【3-Layer Thickened Fuel Line】The fuel pipeline is made of 3 layers: inner pipe, outer pipe and additional reinforcement layer. It is resistant to oil, cold, and ethanol. The inner and outer tubes are made of rubber and the middle reinforcing layer is braided fiber nylon thread. The wall thickness is 3.2mm. The 6.5ft/2m hose can be cut to size for all your applications..
  • ★【Fuel Filter】It can filter impurities, dirt, and fuel particles to prevent clogging of the carburetor and only allow clean fuel to flow in and keep the engine charged..
  • ★【Wide Application】Electric fuel pump Fit all 12 Volt Cars such as Toyota, Ford, Honda, Mazda, and any other suitable car Trucks , Boats & Generators..
Check Stock

Fill-Rite FR711VA Cast Iron 115V AC Fuel Transfer Pump with Discharge Hose, 901-Gallon Meter, and High-Flow Automatic Nozzle, Red

  • HIGH-FLOW FUEL TRANSFER: Rotary vane high-flow fuel transfer pump designed for gas, diesel, and biodiesel.
  • MADE IN THE U.S.A.: High-flow pump features heavy-duty cast iron construction.
  • EASY TO USE: Easy-to-read 4 digit mechanical meter.
  • 30-minute duty cycle with 20GPM flow rate.
  • NOZZLE INCLUDED: Fuel pump with an iron rotor and carbon vanes.
  • includes a 1-inch x 18-foot static wire and high flow automatic nozzle.
  • 1/3 HORSEPOWER: Flow pump with a 901-gallon meter and 1/3 horsepower motor.
Check Stock

RIDGID 21903 SeekTech ST-510 Line Transmitter (10 watts), Underground Cable Locator and Utility Locator , Yellow , Small

  • Fully variable power output to maximize battery life or push the signal further down the run for better utility locating and large-diameter pipe location.
  • LCD display provides instant visual feedback about line resistance, impedance, and current flow keeping circuit information easy to read while underground wire locating.
  • Extended range 25-foot (7,62 meter) terminal leads can attach using the heavy duty clips or built-in magnets and have built-in edge to scrape paint for optimal connection to pipe, ground or connection point.
  • Quick and easy to use line locator with LCD display, LED light indicators and carry handle and straps for sweeping.
  • Generates frequencies: Direct Connect - 128 Hz, 1 kHz, 8 kHz, 33 kHz, 93 kHz.
  • Induction - 1 kHz, 8 kHz, 33 kHz, 262 kHz* - Competitor frequencies available in both direct connect and induction.
Check Stock

BTMETER BT-7200APP TRMS 6000 Counts Clamp Multimeter, Digital Clamp-on Ammeter for AC/DC Current Voltage Resistance Capacitor Frequency Continuity Temperature NCV Meter

  • ...t clamp-on multi tester BT-7200APP can auto connect to your Android / Apple phones or tablet with ease, allows you viewing logging the data out of the arc flash zone 15m (50 ft) away, and save the measurement for detailed analysis, sharing later..
  • ⚡【AC DC Clamp Amp Voltmeter w/ NCV】This clamp multitester can accurately measure AC/DC Amperage, AC/DC Voltage, Resistance, Frequency or Duty Cycle, Capacitance and also provides Noncontact AC Voltage(NCV) detection, Diode, Continuity Buzzer and Temperature(℃/℉) tests. Easy to use in non-contact ampere measures, troubleshoot electrical problems in , motors, household appliances, HVAC.
  • ⚡【Continuous Data Logging Clamp DMM】This clamp-on meter can displays AC DC amps, volts, ohms, Cap, Hz Temp in Max/Min on the same interface with real-time reading. The curve graph w/ timing will show you the changes of amp volt flow more visually. Also supports adjustable data logging rates for continuous testing/ recording unless the battery is dead or the memory is full..
  • ⚡【Reliable True RMS Voltage Amperage Meter】0.1 amp resolution for 0.1 ~ 60A AC DC current, 1A for 60 ~ 400....
Check Stock

Cannon Neoprene Rubber Viscometer Holder for CMVC and AIVC

  • ★★【SPECIFICATION】❶Name: Water Meter❷Material: ABS+Copper❸Model: TS-S3003E❹Structure: Rotating Wing Water Meter❺ Installation Method: Horizontal Installation.
  • ★★【FEATURE】High‑accuracy mechanical rotating wing water meter with stable and accurate readings.The total tonnage is visually displayed for easy reading during meter reading..
  • ★★【STABLE PERFORMANCE】The meter has a built‑in filter, which can block large particles with stable performance..
  • ★★【APPLICATION】Compact design, suitable for most metering, mainly used in homes, gardens, etc..
  • ★★【EASY TO INSTALL】Mainly used to measure the flow of cold water in the pipeline and is easy to install..
Check Stock

BTMETER BT-846A Pro HVAC Anemometer Measures Wind Speed Wind Flow Wind Temperature CFM Air Flow Velocity Meter with Backlight MAX MIN AVG

  • ➤【Pro Air Flow CFM Anemometer 】Accurately measures wind velocity in 5 units: m/s, km/h, ft/min, knots, mph. wind temp in ℃/℉ , air flow in....
  • ➤【Higher Range Wind Speed Meter 】Higher Wind Speed Range: 0.001~100 mph (Accuracy: +/- 3% +/- 0.2 reading), Resolution: 0.001. Air temperature....
  • ➤【Airflow CFM Meter】BT-846A wind speed gauge measures Wind flow range: CFM 0-999900 ft3/min, Resolution: 0.001-100, Air flow area : 0.001-9999....
  • ➤【Separated Extendable Wind Sensor】Built with user-friendly extendable wind sensor vane, so you can still look at the readings easily while you....
  • ➤【Must Have for Air Balancing】 Designed for HVAC trouble-shooting, air flow balancing. The separated wind speed sensor can be replaced if it’s....
Check Stock

BTMETER BT-866A Pro Handheld HVAC Anemometer for CFM Air Flow, Wind Speed Meter Gauge Measures Wind Velocity Temp %RH Dew Point with USB Sync to PC

  • ★【Wind Data Sync on Computer】 This wind velocity meter can measure Wind Speed, wind temperature, wind flow, relative humidity(%RH) and dew point, provides Max / Min of wind velocity reading to balancing the HVAC system. Built with sensitive 8 vanes to pick up slow winds down to 0.01 resolution. Comes with a USB cable and PC software for wind data logging, analysis and monitoring..
  • ★【High Accurate HVAC CFM Meter】Measures high Wind Velocity range 0.3~40 m/s, +/- 2.0% + 50, display in 6 units: m/s, km/h, ft/min, knots, mph, fpm.
  • Wind Temp Range 14°F～140°F, +/- 2.7 °F display in 2 units ℃℉(Celsius,Fahrenheit).
  • ★【USB Data Logging】With a metal screw hole in the bottom so you can mount it on a tripod for hands-free operation. Support to connect the wind meter to computer via USB port, for monitor and record wind speeds, temperature, CFM air flow and RH, perfect for balancing air flow in HVAC tasks such as: duct vents, AC air output testing.
  • ★【Portable Anemometer】 It’s a handheld pocket size wind speed indicator comes with protective case, Large Backlit screen, Low battery indicator and auto shut down to save the battery. Portable for indoor and outdoor wind measurements,such as: Long range s....
Check Stock