Top Inch And A Half Hose 2

Hose Clamp, Stainless Steel Hose Clamps for 1 1/2 Inch to 2 1/2 Inch Hose Pipe Large Adjustable Worm Gear Hose Clamps Assortment Kit for Automotive Radiator Fuel Line Mechanical, 10 PCS Hose Clamp Set

  • Wide Range of Sizes --- Hose clamp set clamping range: 1/4 inch to 1/2 inch, 3/8 inch to 5/8 inch, 1 inch to 2 inch, 1-1/2inch to 2-1/2 inch, the various size stainless steel clamps help you easy to clamp different size hose or pipe..
  • High Quality --- Stainless Steel Hose Clamps made of thick SUS 304 stainless steel (including band, housing and screw), has the features of corrosion-resistant, anti-rust, salt resistant, waterproof and oil proof. Hose clamp kit, sturdy, durable, reusable, no longer worry about them rusting and breaking..
  • Excellent Workmanship --- The Worm drive Hose clamps with shiny silver and smooth edge, no scratch to your hose. Unique rectangular hole design, high torque, secure hold and smooth drive. Hose clamp assortment has clamping range from 1/4 inch to 2-1/2 inch (6mm-64mm), no cut, effectively to clamp any hose of different size..
  • Easy To Install --- Hose clamp large and small size both have pre-assemble hose clamp fasteners, easy to tighten locking or quick release the clamp. With through hole process design, just need to use a hose clamp driver to loosen the screw, then thread the pipe through the hose clamp and adjust the size to fitting your hose's size and tighten the screw..
  • Wild Application --- Worm gear hose clamps are w....
Check Stock

HOSPAIP Garden Hose 50 ft Water Hose with 10 Function Hose Nozzle, Expandable Garden Hose with Hose Holder, Flexible Lightweight Water Pipe with Brass Fittings, Expanding Car Wash Hose (Green)

  • ... hose nozzle supports 10 patterns to fulfill your different watering purposes. Rotating bezel to choose the kind of nozzle you need: Full, Flat, Shower, Cone, Jet, Soaker, Angle, Mist, One Half Vertical and Center. The spray nozzles for garden hose with non-slip handgrip makes it effortless for operation..
  • Solid 3/4 Inch Brass Connectors: The flexible garden hose is equipped with a 3/4 inch American standard solid brass joint and leakproof rubber gasket, which precisely help you get rid of common pipe leaks, cracks and rust. You can connect all faucets for a thread size of 3/4 inches, or use an extra adapter to fit with our leakproof gardening hose..
  • Wide Application and Easy to Store: This kink free expandable 50ft garden hose is suitable for all of your outdoor watering needs, including house, car, floor, yard washing, garden watering, even pet cleaning. You just drain water from the shrink hose when not in use. And use the equipped storage bag to store your lightweight water hose 50 ft out of direct sun, or rewind the garden water pipe into a hose hanger for store..
Check Stock

Fulton 4 inch to 2 1/2 inch Reducer Fitting for Dust Collection Hose to Hose Connections and 4 Inch Port Connections on Larger Machinery

  • The Fulton 4 Inch to 2 1/2 inch reducer has been designed with a specific purpose in mind. That purpose is to connect the industry standard 4 inch diameter dust collection hose with the other industry standard 2 1/2 inch diameter dust collection hose. With a couple of hose clamps (not included) this reducer does its job perfectly and more!.
  • One of the reasons that this fitting is used so often within the woodworking industry, is that many of us don’t want or need a large dust collection system in our garage or workshop. With this fitting, you’ll be able to reduce your hose size down to the 2 1/2 inch size which the most commonly used size for most big box store wet/dry vacuums and shop vacuums..
  • This cone shaped reducer can be also be used on machinery with a little help from some other accessories. Typically the reducer works with hose since it is basically the same size as your 4 inch and 2 1/2 inch machinery or shop wet/dry vac ports. With a 4 inch diameter rubber coupler (sold separately) or a short section of 4 inch hose you can connect the reducer directly to a 4 inch port on machines like band saws, table saws, large planers and more..
  • Most wet/dry vacuum hoses will plug directly into the smaller end of this fitting making it a super value fo....
Check Stock

18PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/4\(12mm-32mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE 12 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 1/2’’ (12.7mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #12 hose clamps have adjustable clamping range of 1/2" to 1-1/4"(12mm-32mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps, 1 1/4 inch hose clamps etc. The average torque of the hose clamps is 10.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These....
Check Stock

Gold Cube + Accessories - Gold Mining Equipment (Gold Cube 4 Stack Deluxe + Trommel)

  • This piece of Gold Mining Equipment is specially made to recover fine gold. The Trommel top unit completely spins and washes your gold-bearing dirt and gravel. Gold Cube 4 Stack Deluxe with Trommel includes: 1 Slick Plate, 3 Separator Trays, Stand, Pump, Hose, Hose Adapters, and 5 inch Trommel for the top..
  • The Trommel topper is self jigging to the Gold Cube. It consist of a 12 volt 5 inch diameter trommel top unit with a 16'' long barrel and a 3/16'' classifying screen. You also get an adapter plate to attach the trommel to the Gold Cube and an angle adjustment bar for adjustable pitch. The Trommel can also be taken off when you need to use the Cube by itself..
  • The Trommel's hopper and barrel both have a sprayer so cleaning your material is automatic as well as also providing the proper amount of water to the Gold Cube. New and improved trommel has spray bar on outside of barrel to allow more area inside..
  • Unique G-Force technology in Gold Cube cleans and separates the gold. The Gold Cube is made in the USA! TROMMEL SHIPS IN SEPARATE BOX FROM GOLD CUBE!.
Check Stock

Dust Collection Cone Reducer 4-Inch to 2 1/2-Inch plus 5 Vacuum Hose Adapters Fits 1 1/16 to 1 3/4 inches Includes Shop Vac Adapter 2 1/2 to 1 1/4 inch and 1 Rubber Reducer

  • Dust Collector Accessories - Included is 6 different dust collection fittings for woodworking dust collection, vac adapters, vacuum hose adapters. Several for a small dust collection system. Details in photos..
  • Connect 4” ID flexible dust collection hose to 2-1/2” ID flexible dust collection hose. Durable ABS plastic. NOTE: This cone reducer is designed to work with 4” and 2-1/2” hoses - It is NOT intended to fit or accommodate a 2.5 inch OD or 4 inch OD dust collection equipment port directly.
  • Useful adapter that allows you to step down from your larger 4 dust collection hose to a smaller 2.5 inch shop vac dust collector hose branch line..
  • Aslo, a shop vac hose adapter to go from 2.5 inch to 1.25 in hose and a rubber step adapter for many purposes that goes from 1.06 inches OD to 1.61 inches OD. More details of the other adapters in photos..
  • From 4 inch dust collection hose to 2 1/2 dust collection hose to use with your shop dust collectors for dust control. Also smaller adapters for your shop dust collection system or just to connect your vacuum to an attachment(NOTE- 2 Adapters come already connected together but come apart easily)..
Check Stock

20PCS Hose Clamps Stainless Steel Sheboren Clamping Range 1/2\ to 1-1/16\(12mm-27mm), 1/2’' Hose Clamps, 3/4'', 1’’ Hose Clamps SAE #10 Worm Gear Hose Clamps for Automotive Plumbing

  • 【Hose Clamps Specification:】With 5/16’’ (8mm) band width, 1/4’’ (6.35mm) hex head screw, these SAE size #10 hose clamps have adjustable clamping range of 1/2" to 1-1/16"(12mm-27mm), fit hoses within this range, great as 1/2 inch hose clamps, 3/4 inch hose clamps, 5/8 inch hose clamps,7/8 inch hose clamps, 1 inch hose clamps etc. The average torque of the hose clamps is 9.5N, much higher than the standard torque 6.78N..
  • 【Durable Quality& Premium Materials:】All the hose clamps including the band, housing and screw are made of 304 stainless steel. These worm gear hose clamps are salt resistant, acid resistance, anti rust, anti-corrosion, waterproof and oil proof. These SAE standards compliant hose clamps are sturdy, strong and durable, you’ll never need worry about rusting or breaking..
  • 【Effortless Installation& Easy to Operate:】These 1 inch hose clamps are of beautiful shape, precision polishing with smooth surface without burrs. You can install the hose clamps without any effort: use a slotted screwdriver to loosen or tighten the screw of hose clamps then adjust the size, thread the pipes through the hose clamps, tighten the screw and hose clamps in place..
  • 【Wide Applications, Save Time and Money:】These 3/4’’ hose clamps can....
Check Stock

Hydrotools Weighted Half Moon Swimming Pool Spa Maintenance Vaccum Head (2 Pack)

  • Hydrotools weighted half moon vacuum is head weighted (1.5 pounds) to stay down making pool vacuuming easier.
  • Hydrotools weighted half moon vacuum accepts 1.25 or 1.5 inch vacuum hose.
  • Quick snap pole adapter fits 99% of vacuum poles.
Check Stock

Universal Dishwasher Washing Machine Drain Hose - Flexible Corrugated Washer Drain Hose Dishwasher Drain Hose Extension Kits with 1 Extension Adapter and 2 Hose Clamps U-Bend Hose Holder 6.5FT

  • ...n hose holder. If your home washing machine drain and dehumidifier hose are not long enough or you need to replace the drain, you can choose our drain hose. We also sale 10 ft and 13 ft drain hose, is a perfect fit for your washer hose, including LG, GE, Samsung, Maytag, Whirlpool, and all other brands!.
  • 【1.2 Inch Diameter Universal】 The whole drain hose length measures 2 meters/ 6.5 feet for universal roller machine with inner diameter 30 mm/ 1.2 inch connector.
  • PP material built in the hose, it will return to the original shape after under pressed, ensure the unobstructed draining, the thick-walled, corrugated design prevents the hose from kinking, pinching, blocking, and leaking..
  • 【2 x Steel Hose Clamps】 Our Drain hose kit includes 2 PCS 18-32 mm steel clamps for stronger connection. just insert the forming outlet into the end of the hose without any tools.
  • If you are using it for extended hose, simply connect the adapters and connect them without removing the previously connected drain, for even more fixing, you can add a clamp..
  • 【1 x White Adapter】 Our Drain hose kit includes 1 PCS white adapter, Diameter - 21 mm/ 0.8 inch, Length - 5 cm/1.97 inch, is suitable for most water pipes that are directly 20 mm inside. If you need a longe....
Check Stock

Universal Dishwasher Washing Machine Drain Hose - Flexible Corrugated Washer Drain Hose Dishwasher Drain Hose Extension Kits with 1 Extension Adapter and 2 Hose Clamps, U-Bend Hose Holder (6.5 FT)

  • ...n hose holder. If your home washing machine drain and dehumidifier hose are not long enough or you need to replace the drain, you can choose our drain hose. We also sale 10 ft and 13 ft drain hose, is a perfect fit for your washer hose, including LG, GE, Samsung, Maytag, Whirlpool, and all other brands!.
  • 【1.2 Inch Diameter Universal】 The whole drain hose length measures 2 meters/ 6.5 feet for universal roller machine with inner diameter 30 mm/ 1.2 inch connector.
  • PP material built in the hose, it will return to the original shape after under pressed, ensure the unobstructed draining, the thick-walled, corrugated design prevents the hose from kinking, pinching, blocking, and leaking..
  • 【2 x Steel Hose Clamps】 Our Drain hose kit includes 2 PCS 18-32 mm steel clamps for stronger connection. just insert the forming outlet into the end of the hose without any tools.
  • If you are using it for extended hose, simply connect the adapters and connect them without removing the previously connected drain, for even more fixing, you can add a clamp..
  • 【1 x White Adapter】 Our Drain hose kit includes 1 PCS white adapter, Diameter - 21 mm/ 0.8 inch, Length - 5 cm/1.97 inch, is suitable for most water pipes that are directly 20 mm inside. If you need a longe....
Check Stock

WORKSHOP Wet Dry Vacuum Accessories WS25022A Extra Long Wet Dry Vacuum Hose, 2-1/2-Inch x 20-Feet Locking Wet Dry Vac Hose for Wet Dry Shop Vacuums

  • Using the included adapters This wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening including workshop wet/dry vacuums..
  • Locking tab allows the wet dry Vac hose to easily detach for storage unlike some shop vacuum hoses.
  • 2-1/2-inch diameter vacuum attachments allows for larger sized debris collection and maximum airflow.
  • Wet Dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening.
  • 2-1/2-Inch x 20-Foot Locking hose provides extended reach, and locking tab keeps hose connected to the wet dry vacuum cleaner during use.
  • Using the included adapters this wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening including WORKSHOP wet/dry vacuums..
  • Locking tab allows the wet dry vac hose to easily detach for storage unlike some shop vacuum hoses.
  • Wet dry vacuum hose fits most shop vacuums with the standard 2-1/2-inch inlet port opening.
Check Stock

3 Pieces Universal Vacuum Hose Adapter, 2-1/2 Inch to 1-1/4 Inch, 1-1/4 Inch to 1-3/8 Inch to 1-1/2 Inch, 1-3/8 Inch to 1-1/4 Inch Wet Dry Vacuum Converter Reducer Attachments for Vacuum Cleaner

  • Package includes: you will receive 3 pieces of wet or dry vacuum hose converter with 3 different styles, adequate quantity and various styles give you wide choices for different occasions, and meet the replacement needs.
  • Vacuum hose reducer 1-3/8 inch to 1-1/4 inch: this hose converter can reduce 35 mm/ 1-3/8 inch vacuum cleaners to 32 mm/ 1-1/4 inch attachments, so that your cleaner can have more choices for cleaning brushes, and help you apply at home easier.
  • Vacuum attachment 1-1/4 inch to 1-3/8 inch to 1-1/2 inch: this vacuum attachment can convert 1-1/4 inch to 1-1/4 inch, 1-1/4 inch to 1-3/8 inch, 1-1/2 inch to 1-1/4 inch, 1-1/2 inch to 1-3/8 inch, which can meet your different needs in daily clean, and suitable for most vacuum.
  • Vacuum converter 2-1/2 inch to 1-1/4 inch: this vacuum hose adapter can convert 2-1/2-inch to 1-1/4-inch, which the hose converter can link to other smaller tools or attachments to provide you a wide application, and make the daily clean work easier and faster.
  • Durable material: these vacuum cleaner hose reducers are made of quality ABS plastic material, lightweight, durable and stable, easy to apply, not easy to break or damage, which you can apply for a long time.
Check Stock