Top Inch Square Pvc Pipe

2 Inch Diameter Clear PVC Schedule 40 Pipe [Pipe ID 2.047 inch, OD 2.375 inch] (Bluish tint), Choose Your Length (5 inches to 8 Feet) (Selected Length: 10 Inches)

  • 2 Inch Clear PVC Pipe (SCH40, Bluish Tint).
  • Pipe ID is not exactly 2 inch. Pipe has approx. ID of 2.047 inch and approx. OD of 2.375 inch as specified by PVC SCH40 specs..
  • Works with standard PVC SCH40/SCH80 Fittings & Cement..
Check Stock

KCHEX Boat Trailer Incandescent Pipe Light Kit for 2\ PVC Upright Guide Poles Sealed

  • ➨ These incandescent Pipe Lights are designed for long-life and convenience. Two Incandescent Oval Lights are sealed inside a PVC housing. housing mounts directly onto 2 inch pvc pipe with a 2 3/8 Outside Diameter. and also can be adapted for other sized pipes..
  • ➨ The Lights perform Turn signal, Braking function, and Running lights. The Pipe Light Housing also features reflectors on the rear of the housing to assist in reversing. Whats included: Pair of Pipe-Light PVC housing, Pair of Incandescent 6 inch Oval Lights, Pair of 10 Foot wiring pigtails, Four butt connectors, Four scotch locks, and Four Stainless Steel Screws..
  • ➨ Kit includes: One Pair of PVC Housings. One Pair of Red Incandescent Pipe lights. One Pair 10 foot Pig Tail Wiring Harness. Four butt Connectors. Four Stainless Steel Screws. Four scotch locks. ( for holding wiring to trailer frame ).
  • ➨ COME WITH AN EASY INSTALL GUIDE FOR BOATERS.
Check Stock

PVC Termination Cap Mesh Screen Vent Cover, Furnace & Roof Vent Cap, Stainless Steel Wire Round Exhaust Pipe Cover End 4

  • ATTENTION: Please Read: the inner diameter measures 4" inch and the outer diameter measures 4.5" inch, therefore any pipe connected with mesh pipe cover WILL NOT FIT so adapter such as PVC / rubber elbow or coupling must be purchased separately (not included) - please see listing images and infographic below for more details on compatible size to ensure correct pipe cap fitting.
  • PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent screen cap attached to the exposed pipe outdoor through the ground, wall, or roof as shown in the listing images and infographic.
  • SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or adapter of the PVC / rubber elbow or coupling (not included) compatible with pipes connected to high efficiency furnace, steam, water heater, air intake, exhaust, roof vents, sewer and water drains.
  • TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves, debris, birds, bugs, and wildlife from entering the mesh screen vent pipe cover.
  • AIRFLOW: PVC pipe cover works as pipe sc....
Check Stock

White Clamps Farm Plastic Clamps Greenhouse Film Clamps Grip White Clamp PVC Pipe Plastic Clamps for Greenhouse Plant Supplies (40 Pieces,3/4 Inch)

  • Fits 3/4 inch PVC pipe: each white clamp measures approx. 8 cm/ 3.14 inches in length, 1.9 cm/ 0.75 inch in diameter, it works on 3/4 inch PVC pipe, and it will work for pipes with a little larger or smaller diameter too, please confirm the pipe diameter before purchasing.
  • Reliable to use: these farm plastic clamps are made of PVC plastic, the material has strong plastic structure and temperature resistant, so they are durable and sturdy to use, featuring with strong fixed function and not easy to break, so you can use them for long time.
  • Practical application: this PVC pipe plastic clamp is suitable for greenhouse film, net to pipe, quilting frames and more, it is also an ideal choice for building greenhouse, floor covering or other places if needed, so practical in our daily life.
  • Convenient to use: you can use these plastic clamps to the pipe, they hold the plastic on the pipe tightly, without damaging or breaking, and you can use these plastic clamps to build your greenhouse easily.
  • What you get: you will receive 40 pieces white clamps in the package, with white colors and proper size, sufficient quantity is enough for your daily use and replacement, and you can share them with your friends or neighbors.
Check Stock

PVC Fitting Saver with 1-½-Inch and 2 Inch Head Aluminum, PVC Pipe Reamer, PVC Socket Saver with 0.315" Hex Shaft, For Water Lines, Drain Lines, Vent Lines

  • Feature: Whether you are a professional or not, Gohelper PVC reamer is excellent for you. It works great on Schedule 40 PVC Pipe, CPVC and ABS Ventilation pipe, drain pipe, water pipe, but it does NOT work on schedule 80 pipe..
  • Robust Build Quality: This PVC fitting saver built with premium quality aluminum alloy body with stainless steel hex key shaft, durability and high hardness..
  • Durable and Versatile: Square carbide insert provides four cutting surface, you can be turned 90 degrees for new cutting surface before use, the cutting efficiency is higher and faster..
  • Compatibility: PVC fitting saver come with 0.315" hex key shaft design can be compatible with standard drills, cordless drills, or impact drills. It is very suitable for family and temporary work..
  • Note: It is recommended to use a variable-speed electric drill with low-speed cutting.
  • Appropriately add water for cooling to prevent the pipeline from melting at high temperature,Check if the hex key shaft is locked or not before use. Warm tips: CN,US,EU Patent Pending..
Check Stock

Lenox Industrial Tools 12123 R1 PVC Cutter Upto 1-5/8-Inch Ratcheting Cut

  • The specially designed jaws on this PVC pipe cutter hold the pipe in place for straight, easy cuts.
  • This PVC cutter has rubberized grips that allow confident cutting, even in wet or dirty conditions.
  • A release button on this PVC pipe cutter allows true 1-handed operation.
  • Locking tab keeps the stainless-steel blade securely in place during 1-handed operation.
  • Cuts up to 1-1/4-inch nominal and 1-5/8-inch maximum OD.
Check Stock

3/4 inch 3-Way PVC Pipe Fittings, PVC 3-way Fitting Connectors, Used for Building Furniture, Furniture Grade, White (12 Pack)

  • The 3/4-inch pipe fittings are made of high-quality PVC, with high plasticity, low temperature resistance, impact resistance and corrosion resistance. Furniture level, it has a higher manufacturing process than ordinary pipe fittings..
  • Furniture-grade PVC connectors are very suitable for DIY furniture, with smooth surfaces and tapered edges, you can use these PVC accessories to build any furniture you like..
  • Size: Fits 3/4 inch PVC pipe with an outer diameter of 1-1/16” or 1.050”.
  • Wide range of applications: These furniture-grade PVC pipe fittings are suitable for constructing swimming pool products, chairs, tables, shelves or garden supports, etc..
  • We sell the same series of DIY products, such as bottom brackets, tees, crosses, etc., which are convenient for you to make a series of DIY furniture. If you have any questions, You can contact us by email and we will help you at any time.
Check Stock

15Pack 3/4Inch 4 Way PVC Fittings, Heavy Duty PVC Elbow Side Outlet Tees, Furniture PVC Tee Corner Fittings for Building PVC Furniture Greenhouse Shed Pipe Fittings Tent Connection

  • 4 Way PVC Fittings——The PVC Elbow are made Furniture Grade PVC with a high-gloss finish for years of use without yellowing, cracking or breaking, perfect for building PVC furniture, such as dog beds and garden project.
  • 3/4Inch PVC Elbow Fittings——Package include 15pcs 3/4inch PVC connectors, fits externally over 3/4” size PVC pipe, which has actual OD 1-1/16” or 1.050” and an inside diameter of 3/4”(Sch.40 or Sch.80 PVC pipe.
  • Professional Performance 4-way Tee——90 Degree Elbow is manufactured with a sleek looks without any barcodes, embossments or manufacturer markings on their outer surface, suitable for indoor and outdoor use.
  • Impact Proof——Side-out elbows can connect at a 90-degree angle to each socket.
  • The extra deep sleeve allows the pipe to be inserted further into the joint for a safer and more secure hold.
  • Wide Applications——4-way Corner fittings are a quick and handy solution for building any type of structure out of PVC pipe, such as cat enclosure, shelves, pool products, chairs, desks, puppy play cube or puppy gym, garden supports structures and so on.
Check Stock

CIRCOPACK UTILITY Grade 2 Inch 4-Way PVC Fitting Connectors For Use With Schedule 40, 2 Inch PVC Pipes (2 Pieces)

  • These are for use with Schedule 40, 2 inch pipes. Do note that Schedule 40, 2 inch PVC pipe has an Outer Diameter of 2.375 inches..
  • The 4 way LT PVC pipe fitting, also known as a side outlet tee or 4-way corner fitting is commonly used to building the sides of a box or cube out of PVC pipe. It is also useful to make the ridge on PVC greenhouses or small PVC buildings..
  • Some dog agility customers use the 4 way LT at the base of jump pole stands..
  • These unprinted UTILITY grade fittings are an affordable alternative to the high gloss, high price, furniture quality PVC fittings..
  • This is a CIRCOPACK brand 2 piece value bundle. Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product. CIRCOPACK is a Value Emporium brand..
Check Stock

WORKPRO Ratchet PVC Pipe Cutter Tool & WORKPRO 25FT Tape Measure

  • ... and belt clip makes the tape measure easy to carry in various occasions.When your hands are not free, you can hang it around your waist or tie it around your wrist. Of course, the design of the strap also makes the product more convenient to hang and store.
  • WORKPRO 25FT Tape Measure - Clear scale markings every 1/8 inch, 1 foot, 1.5 feet make reading easier. And the minimum accuracy of the measuring tape is 1/32 inch, which enables more accurate measurement of items. The yellow background and black and red text make the tick marks more visible. At the same time, the tape measure has nylon coating which can prevent the blade from rusting and make the blade more wear-resistant, so that the mark will not be easily scratched.
Check Stock

PVC Termination Cap Mesh Screen Vent Cover Furnace & Roof Vent Cap Stainless Steel Wire Round Exhaust Pipe Cover End 3 Inner & 3.5 Outer Diameter

  • ATTENTION: Please Read: the inner diameter measures 3" inch and the outer diameter measures 3.5" inch, therefore any pipe connected with mesh pipe....
  • PRODUCT PATENT: PVC drain screen cover with wire round mesh screen built in slot allows water condensation to drain out on the side of the PVC vent....
  • SIMPLE & COMPATIBLE: mesh screen vent cover is easy to install and no effort is required by inserting the termination vent cap inside the hub or....
  • TOUGH: the white stainless steel termination vent mesh screen cover is the best pipe cover for outdoor that won't corrode or rust preventing leaves,....
  • AIRFLOW: PVC pipe cover works as pipe screens with stainless steel mesh screen cap that allows maximum airflow for the furnace work through the mesh....
Check Stock

CIRCOPACK Screw Tab Caps for Schedule 40 PVC Pipes Furniture Grade (2 pieces) (1-1/2 inch)

  • Three tabs with screw holes come out from the caps. These are strong when pulling straight out from the attached surface but they are weaker when side to side pressure is applied..
  • Some people use them for mounting a small table to the end of PVC pipe..
  • The Screw Tab Cap or table cap PVC fitting is useful any place you want to secure pipe to a surface..
  • The outlet is a non-threaded socket and is compatible with furniture grade PVC pipe or standard PVC pipe from a hardware store..
  • This is a CIRCOPACK value bundle comprising 2 pieces of Screw Tab Caps for use with 1-1/2 inch Standard PVC (Schedule 40). Look out for the Copyright CIRCOPACK packaging to ensure you are receiving a genuine product..
Check Stock