Top Inch To Metric Adapter

22 Flexible Drill Extension Hex Shank Drill Bit Kit Rotatable Joint Socket 1/4 3/8 1/2 Inch Hex Socket Adapter Socket Bendable Drill Bit Extension Screwdriver 105 Degree Angle Drill Bit Extension

  • Nice combination: you will receive 1 piece bendable drill bit extension, 3 pieces socket adapter sets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 3 pieces 360 degree rotatable universal joint swivel sockets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 10 pieces screwdriver bit sets, 1 piece 105 degree right angle drill extension, 1 piece socket wrench and 3 pieces magnetic screwdriver bit sets, nice and adequate to use in daily life.
  • Socket adapter set: socket adapters set and 360 degree rotatable power drill adapters set, each set come with 1/ 4 inch, 3/ 8 inch, 1/ 2 inch, each with a 1/ 4 inch hex drill bits, widely applied in the installation of electric screwdriver, manual screwdriver and other installation for the hexagonal tool.
  • Suitable for standard 1/ 4 to 3/ 4 inches and metric 7 mm to 19 mm screws.
  • Flexible function: flexible drill extension kit and bendable drill bit extension can be twisted and rotated at different angles.
  • It can be connected to the drill, a charging bit or a manual wrench, thus improving you work efficiency.
  • Wide applications: this impact socket adapter set is suitable for light drilling, slow speed or screw drives, ratchet hand screwdrivers and so on, which can be applied at homes, warehouses, garages, repair shop....
Check Stock

BOXO USA Heavy Duty Toolbox 103 Piece MotoBox Tool Box with Locking System - Black

  • ...10, 12, 13, 14, 15, 17, 18, 19, 20, 21, 22, 23, 27mm). 1/4" and 3/8" Drive 90-Tooth ratchet wrenches. 3-Piece 1/4" Drive socket extension bars (2", 4", 7" lengths). 2-Piece 3/8" Drive socket extension bar (4", 7" lengths). 1/2" Drive socket extension (3" length). 1/4" Drive Universal joint. 3/8" Drive to 1/4" Drive adapter. 3/8" Drive to 1/2" Drive adapter. 1/2" Drive Swivel handle (15" length)..
  • 7-Piece ¼” Drive hex bit and torx sockets (H3, H4, H5, H6, T15, T20, T25). 11-Piece 3/8" drive hex bit and torx sockets (H5, H8, H9, H10, H12, T27, T30, T40, T45, T50, T55). 2-Piece 1/2" Drive hex bit sockets (H14, H17). 7-Piece foldable hex key wrench set (1.5, 2, 2.5, 3, 4, 5, 6mm). 12" Engineers hammer. 5M SAE/Metric tape measure. Digital tire gauge. 9” Reversible wire twist pliers. 1/4" Drive slide T-handle. 4-Piece 3/8" drive slide T-handle. Spoke wrench (1, 3, 5 and 2, 4, 6)..
  • 3/8" Drive hex axle tool (17, 19, 22, 24mm). 10mm and 13mm Spoon wrench. 32mm Spoon wrench with 22mm and 27mm insert keys..
Check Stock

Actron CP7827 Compression Tester Kit

  • Actron’s Compression Tester Kit detects worn piston rings, burnt valves, and blown head gaskets.
  • Convenient push-button side release valve allows repeated testing without the need to disconnect between tests.
  • Gauge features a 2-1/2 inch diameter, easy-to-read face with standard and metric scales: 0-300 PSI and 0-2100 kPa.
  • 17 inch, high-pressure, flexible, oil and grease resistant hose features a quick release connection at the gauge for faster, easier use.
  • 14mm and 18mm ends fit most thread sizes while included 14mm long reach adapter is perfect for many late model vehicles wth deeply recessed spark plugs.
Check Stock

Metric 10x1 (f) to 1/8\ NPT (m) adapter

  • Brass adapter threaded M 10x1 (f) to 1/8" NPT (m).
  • Certain Milwaukee 18v grease guns ship with a hose that has a metric 10x1 working end. If you try to replace the coupler and the new coupler does not fit, you need this adapter.
  • NOT ALL MILWAUKEE GUNS ARE AFFECTED. Unfortunately Milwaukee has not said which batches ship with metric hoses and which ship with NPT ends, as they are supposed to. You will need to check the threads or attempt to replace the coupler to know which hose you have..
  • Does not include LockNLube Grease Coupler or grease gun hose..
Check Stock

Reed Tool MKF2 Meter Curb Box Key

  • Universal Socket, Multi-function 7mm-19mm Universal Sockets Metric Ratchet Wrench Power Drill Adapter Socket Professional Repair Tools..
  • ADVANCED DESIGN - Universal socket can self-adjust to any size from standard 1/4" to 3/4" and metric 7mm to 19mm..
  • FLEXIBLE - Mutilfunctional socket can graso the hex nut, screw eye, hook, tension screw and bolt head. Works on a power drill (adapter not included)..
  • SAVE MONEY - Come in handy, and the socket can replace your entire socket set to use in household maintenance, industry, manufacturing, construction..
  • GUARANTEED - If with any reason you are not satisfied with our product, please contact us and you can get a full refund..
Check Stock

32 Pcs Upgrade Original Thread Checker Inch & Metric - Size Gauge Measuring Tool for Imperial and Metric Nuts ，32 Male/Female Gauges - 17 Inch & 15 Metric

  • Each size has a nut and bolt checker on the same gauge. 32 male/female gauges - 17 inch & 15 metric.The Thread Checker is especially well suited for distinguishing between similar inch and metric threads..
  • Thread sizes are permanently stamped onto each gauge (inch in Black, metric in white).The individual gauges rotate freely on the wire cable for fast thread verification..
  • We've added imperial and metric specifications to make it more complete than the models available on the market.These nut & bolt thread checkers are made of strong stainless steel，Inch gauges are clear zinc plated, metric gauges are black oxide..
  • Black Oxide for Metric Size:Includes 15 Metric Sizes part numbers: M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.0, M8x1.25, M10x1.0, M10x1.25, M10x1.5, M12x1.25, M12x1.5, M12x1.75,M14x2.0,M16x1.5,M16x2.0..
  • Zinc Plated for Inch Size: Includes 17 Inch Size part numbers: 6-32, 8-32, 10-24, 10-32, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20, 9/16-18,5/8-11,5/8-11..
Check Stock

23 Flexible Drill Extension Hex Shank Drill Bit Kit Rotatable Joint Socket 1/4 3/8 1/2 Inch Hex Socket Adapter Socket Bendable Drill Bit Extension Screwdriver 105 Degree Angle Drill Bit Extension

  • Home DIY Tool Set : you will receive 1 piece bendable drill bit extension, 3 pieces socket adapter sets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch), 3 pieces 360 degree rotatable joint swivel sockets (including 1/ 4 inch, 3/ 8 inch and 1/ 2 inch ), 10 pieces screwdriver bit sets, 1 piece 105 degree right angle drill extension, 1 piece socket wrench, 1 piece 90 degree right angle screwdriver bits soft shaft and 3 pieces magnetic screwdriver bit sets.
  • Socket Adapter Set: each socket adapters set and 360 degree rotatable power drill adapters set comes with 1/ 4 inch, 3/ 8 inch, 1/ 2 inch hex drill bits, widely applied in the installation of electric screwdriver, manual screwdriver and other tools.
  • They are suitable for standard 1/ 4 to 3/ 4 inch and metric 7 mm to 19 mm screws.
  • Screwdriver Bit: there are 3 pieces 1/ 4 inch hex shank drill bits, adopting quality steel materials, practical and reliable, featuring high strength and wear resistance, with length of 60 mm/ 2.36 inch, 100 mm/ 3.94 inch, and 150 mm/ 5.91 inch respectively, which are applicable for electric and pneumatic screwdrivers and other electric tool screwdrivers, drill bit extensions.
  • Widely applicable: this impact socket adapter set is suitable for light drilling, slow speed or screw dr....
Check Stock

Power Steering Hose Kit for 1982-88 T-Bird Steering Rack to GM Pump

  • Adapts an aftermarket 1982-1988 T-Bird/Cougar type rack to a GM Type 1 Saginaw pump.
  • Pressure line has a 5/8"-18 male inverted flare fitting at the pump end.
  • Adapter for the GM pump, to allow it to work with both metric O-ring and standard inverted flare style threads on the power steering pump fitting..
  • Features a -6AN to an 9/16"-18 O-ring fitting on the rack end.
Check Stock

KUNTEC Cylinder Leak Down Tester Engine Compression Diagnostics Test Tool Kit for Piston Ring, Valve, Head Gasket

  • The Cylinder Leak Detector Kit is designed to easily detect a variety of engine faults, including worn piston rings, worn valves, cracked cylinder walls, and blown head gasket.
  • The Engine Compression Diagnosis Tester Kit also can check the amount of leakage and locate leaks area in an engine cylinder to help determine the source.
  • Cylinder compression tester is suitable for work on any petrol engine with 12 or 14mm spark plugs, and ideal for testing trucks & late model cars where clearance is minimal.
  • Pressure gauge with dual scale reads from 0 to 100 PSI and 0 to 7 Bar, shows pressure in PSI and Bar and percentage of cylinder leakage.
Check Stock

Gage Ball 1.0000\W 4/48 Stem

  • 31 piece metric set also available containing metric balls ranging from 2mm to 32mm..
  • Specify 2.5mm or 4-48 stems when ordering..
  • Inch/Metric software is compatible with DOS and Windows systems..
  • Manual with complete illustrations & instructions with inch/Metric software and above accessories..
Check Stock

Inspection Gage Ball Set

  • 31 piece metric set also available containing metric balls ranging from 2mm to 32mm..
  • Specify 2.5mm or 4-48 stems when ordering..
  • Inch/Metric software is compatible with DOS and Windows systems..
  • Manual with complete illustrations & instructions with inch/Metric software and above accessories..
Check Stock

Gage Ball 9mm w 4/48 Stem

  • 31 piece metric set also available containing metric balls ranging from 2mm to 32mm..
  • Specify 2.5mm or 4-48 stems when ordering..
  • Inch/Metric software is compatible with DOS and Windows systems..
  • Manual with complete illustrations & instructions with inch/Metric software and above accessories..
Check Stock