Top Incra Miter 500sled

Phonleya WiFi Router organize Box Set-Top Box Rack Patch Panel Storage Shelf Hider Cord Management Container Storage Box for Desktop

  • Our 528 Small Coping Sled works on both the router and shaper, either in the miter slot or against the fence. This is the safest and most accurate way to make cope cuts and other cross-cuts on a router table or shaper. Don't try to cope without it! Two adjustable feed handles provide firm control over the sled and your work..
  • Includes an 11-3/4" adjustable steel miter bar that mounts in 6 different locations for best placement. Can also be used without the miter bar against your fence..
  • Holds stock up to 6" wide. Heavy duty 1/2" phenolic base (7-5/8" x 11-5/8") will not distort from clamp pressure..
  • Features one 500 lb. Inboard Toggle Clamp. Hold stock up to 1-3/4" thick, or 2-3/4" with optional 6305R Riser Kit (one Riser Kit required for each toggle clamp). Fence is 12” long. Optional 525S Flip Stop available for repetitive work..
  • Lifetime guarantee against defects in material or workmanship. Made in the USA!.
Check Stock

INCRA MITEREXPRESS Miter Express

  • If you own a miter gauge - any miter gauge.
  • This sled is a sliding, miter-cutting platform that fully supports and controls your work piece throughout the cut.
  • Miter gauges drag your board across the table, a sled slides the work piece giving more support and control creating better, more consistent cuts.
Check Stock

MICRO JIG ZEROPLAY Miter Bar

  • no slop, side-to-side play or seasonal warping.
  • top-down installation for easy and fast mounting to jigs, fixtures and sleds.
  • zeroplay miter bars will fit any standard (3/4”) t or u-shaped miter slot that measures between 0. 73 and 0. 79" wide and at least 5/16" deep.".
  • includes (1) miter bar. miter stop not included. made in the usa..
Check Stock

WEN 3962T 3.5-Amp 10-Inch Two-Speed Band Saw with Stand and Worklight

  • CNC laser out of 3/16″ thick steel plate, formed on a CNC press brake..
  • Dual Miter Gauge slides, with optional foot swtich and Incra V27 Miter Gauge.
  • Fits the following models Milwaukee 6232-20, 6232-21, 6238-20, 6238-21& BS125.
  • Fits the following models Milwaukee Fuel M18 2729-20, 2729-21, 2729-22 & CBS125.
Check Stock

INCRA MITER1000SE Miter Gauge Special Edition With Telescoping Fence and Dual Flip Shop Stop

  • Engraved stainless steel primary scale for precision accuracy.
  • 41 laser cut V-stops for extreme accuracy at all popular angles.
  • Patented GlideLOCK miter bar with 6 expansion points for quick repeats.
  • 18- to 31-inch telescoping incremental miter fence for handling a variety of stock widths.
  • INCRA Flip Shop Stop-Fence Positioner for optimal mitering accuracy.
Check Stock

Rockler Table Saw Small Parts Sled

  • Sled base and fence provide zero-clearance support—just run it through your saw to locate the kerf.
  • Sled rides in miter track of your table saw—included miter slot stop limits forward travel of sled.
  • Rear-mounted blade guard is adjustable to fit most table saws.
  • Aluminum T-track on top edge of fence lets you add a flip stop (not included) for repeatable cuts.
  • Short T-track parallel to blade accepts an optional T-track hold-down clamp (sold separately).
Check Stock

Microjig ZP750-B2S2 Zeroplay Miter Bar 2-Pack - Best Seller (New, Upgraded),

  • Hassle-free miter bars using One-Touch Calibration.
  • No slop, side-to-side play or seasonal warping.
  • Top-down installation for easy and fast mounting to jigs, fixtures and sleds.
  • Fits standard (3/4" x 3/8") T miter slots, ShopSmith and General miter tracks.
Check Stock

Miter Bar, 1Pcs Durable In Use Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Wood Working Tool Suitable for Jigs Fixtures Sleds Router Tables and General Woodworking, 300 mm / 11.81 inch

  • Wide Applications : This is a miter bar usually used in table saw woodworking works, for building various jigs on your table saw, like miter sleds etc..
  • Convenient to Use : Universal threaded mounting holes for convenient use. Includes plans for a wide variety of shop-made jigs and fixtures. Adjustable stainless steel runner for perfect sliding action.
  • Good Performance : Adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist. Locks securely in any standard miter gauge slot with another twist of the wrist.
  • Useful and Practical : For building various jigs on your table saw, like miter sleds. Includes threaded mounting holes and hardware for easy attachment to any application.
  • Fine Quality Aluminium Alloy Material : Made of high quality aluminium alloy, this miter bar is of strong strength and reliable durability for several year using without abusing.
Check Stock

Flattening Workbenches and Wide Boards with a Router

  • ...n blowout at the back of your end grain cuts. Also included is an abrasive strip that is adhered to the adjustable fence. The abrasive strip keeps your stock from sliding or wandering during the coping process. That, along with the heavy duty hold down toggle keeps your stock firmly in place..
  • Many sleds rely on the miter slot for reference. Our coping sled uses the fence as a reference instead. The Rail Guide Coping Sled Pro features a clear acrylic fence for reference which is offset and raised 2” above the base so you won’t cut into the sled. Using a fence rather than a miter bar mounted to the bottom means that you will always be parallel to the router table fence. This is a distinct time saving advantage as you will no longer have keep re-adjusting your router table fence.
  • This robust, full featured coping sled has a laminated ½” thick MDF base that slides across your router table surface effortlessly. The sled also features a large, heavy duty hold down toggle with a 1-5/8” hold down foot to keep your stock in place. The unit also includes two large and sturdy handles for guiding the sled through the cutter. The maximum stock size is 5” wide by 1 ¼” thick. Full instructions are included..
Check Stock

Miter Bar, Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Woodworking Tool Durable in Use 0.374''Thickness(11.81'')

  • Miter Bar --- This is a miter bar usually used in table saw woodworking works.
  • Table Saw Miter Gauge --- Fixture jig is made of high quality materials, it is of strong strength and long durability.
  • Miter Gauge --- Universal threaded mounting holes for convenient use.
  • Miter Bars for Table Saw --- Adjustable stainless steel runner for perfect sliding action.
  • Miter Slot Runners --- For building various jigs on your table saw, like miter sleds etc.
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby Sled)

  • THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles on your mitered projects with the Dubby Sled. The Dubby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer yo....
Check Stock

FTVOGUE Aluminium Alloy Miter Bar Slider Table Saw Miter Gauge Rod Wood Woodworking Tool (450mm/17.71inch)

  • This miter rod is made of high quality aluminium alloy, miter bar is of strong strength and reliable durability for several year using without abusing..
  • This is a miter bar usually used in table saw woodworking works .Universal threaded mounting holes for convenient use..
  • Adjustable stainless steel runner for perfect sliding action. For building various jigs on your table saw, like miter sleds etc..
  • Miter slot bar is easy to assemble, making it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues..
  • These rockler miter bar easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts..
Check Stock