Top Incra Miter1hd Miter Gauge 2

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....
Check Stock

Aluminum Box Joint Jig for Miter Gauge, Miter Gauge Accessories, Joint Jig for Miter Gauge Woodworking Table Saw Tools, Woodworking Tools

  • SPECIFICATIONS: Size: about 450x60x30mm / 17.7×2.4×1.2 inches. Packing list: 1x aluminum box joint fixture, 1x package accessories. Professional design, just for you!.
  • Premium MATERIAL: The box joint jig is made of high quality aluminum alloy, wear resistant and rustproof, excellent performance and long service life..
  • ROUTER TABLE SAW DIY TOOLS WOOD JIG: The miter Gauge Accessories is high precision, excellent workmanship. Miter Bars for miter gauge woodworking tool. Is a good product for you to be a carpenter!.
  • SUIT FOR: Aluminum box joint jig fits is the box joint jig suitable for miter gauge. Use it on your table saw or router tables with standard slots to cut great looking box joints..
  • QUALITY AFTER-SALES: 100% GUARANTEED RETURN AND EXCHANGE, 1 YEAR WARRANTY!!! You are welcome to contact us if you have any problem about our product, we will give you a satisfactory reply..
Check Stock

Miter Bar, Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Woodworking Tool Durable in Use 0.374''Thickness(11.81'')

  • Miter Bar --- This is a miter bar usually used in table saw woodworking works.
  • Table Saw Miter Gauge --- Fixture jig is made of high quality materials, it is of strong strength and long durability.
  • Miter Gauge --- Universal threaded mounting holes for convenient use.
  • Miter Bars for Table Saw --- Adjustable stainless steel runner for perfect sliding action.
  • Miter Slot Runners --- For building various jigs on your table saw, like miter sleds etc.
Check Stock

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a met....
Check Stock

INCRA MITEREXPRESS Miter Express

  • If you own a miter gauge - any miter gauge.
  • This sled is a sliding, miter-cutting platform that fully supports and controls your work piece throughout the cut.
  • Miter gauges drag your board across the table, a sled slides the work piece giving more support and control creating better, more consistent cuts.
Check Stock

DCT Table Saw Fence and Miter Gauge for Table Saw with 3/8in x 3/4in Miter Saw Fence Bar – Table Saw Gauge 18 Inch

  • MAKE ACCURATE CUTS: The DCT | Table Saw Miter Fence with Miter Bar Gauge & Flip Stop offers safety and accuracy when cutting or sanding precise,....
  • USE YOUR TABLE SAW: 3/4-inch (19mm) miter gauge groove fits most standard 3/4-inch table saw slots (measure slot on your table saw to ensure exact....
  • NO MORE PLAY: 18-inch (45.7cm) long fence bar has 8-inch (20.3cm) usable length after fence starts.
  • Bar is 3/8-inch (9.5mm) thick x 3/4-inch (19mm)....
  • BUILT TO LAST: Flip stop slides effortlessly along the fence and locks in place with the plastic tightening knob for quick adjustment while the flip....
  • PACKAGE CONTENTS: Table saw accessories package includes (1) table saw precision miter gauge, (1) fence, (1) flip stop, and necessary saw miter gauge....
Check Stock

Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc

  • If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used..
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8....
Check Stock

Milescraft 7334 Safety Bundle - Includes Feather Board, Push Stick, and FREE Grabber push block. Ideal for use on router tables, table saw, jointers, and even band saws , Yellow

  • ❤ The table saw miter gauage all-aluminum guide rod and all-aluminum baffle can be modified and expanded..
  • ❤ 【Miter gauge cuts accurately】Loosen the knob to quickly adjust the angle, which can be used for precise angle cutting..
  • ❤ 【The table saw miter gauge is easy to operate and safe to use】. The miter gauge can adjust the angle adjustment knob according to the angle of the object to be cut,.
  • ❤ 【Table saw miter gauge can cut objects of different shapes and sizes】..
  • ❤Perfect for Wood Cutting Projects: Can be used on table saws, bandsaws, router planers, lockstitch machines. If there is a product quality problem, any problem, we can replace it at any time (please see the picture size) and its slideshow.
Check Stock

JOUNJIP (3) 2-5/16” HSS Blade Bundle with Mini Miter Cut-Off Chop Saw

  • 【Powerful Mini Miter Saw】- Make miter cuts from 0° to 45°. Cuts to a depth of 1/2 in. – ideal for frames and molding. High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel..
  • 【High-Precision】- This 110V mini chop saw is so accurate that you might never have to file or sand ends! Has adjustable miter gauge for cutting soft metals, wood, plastic and other light materials, perfect for all your DIY projects..
  • 【Precise Smooth Cuts】This mini cut off saw carbon arrow cutter is so accurate that you might never have to file or sand ends! Cuts wood, brass & similar light materials with smooth, precise cuts. Ideal for Small Hobby and DIY Crafts..
  • 【Multi-Purpose】 Small miter saw table saw with adjustable miter gauge, 100T HSS saw blade for cutting soft non-ferrous metals, wood, plastic and other lightweight materials. 2 inch Black Cut-Off Wheel are designed for cutting fiberglass, steel, stainless steel, and other ferrous metals for aggressive cutting action. Perfect for carbon steel, carbon arrows, and mini general purpose metal cutting..
  • 【Quality Service】We guarantee to provide you with the most satisfactory shopping service, no matter if you have any questions about our product,you are welcome to c....
Check Stock

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” Multi –Track Fence with 27 Angle Stops

  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop.
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Check Stock

Husqvarna K4000 Cut-N-Break Saw Orange

  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle.
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts.
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile,....
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects.
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw.
Check Stock

Table Saw, Mini Polisher, Benchtop Buffer Grinder, Polishing Engraving Carving Sanding Cutting, for DIY Jewelry Lapidary Gem Rock Woodworking (D.Woodworking Table Saw 10000RPM)

  • [GREAT AT CROSS & RIP CUTS] The steel rip fence and riving knife system lets you perform an assortment of straighter, longer, wider cuts.
  • [TRULY PORTABLE TABLE SAW] Weighing in at less than 15 lbs., you easily can move it around your workshop or even take it to the job site.
  • [ADJUSTABLE MITER GAUGE] Makes 0-60 miter cuts from both the right and left sides, so you can make every common miter cut, and every angle in-between.
  • [SAFETY SWITCH] An added safety switch and safety key give this saw an added level of security, so you don’t have to worry about accidental starts.
  • [DO IT YOURSELF. DO IT BETTER. DO IT WITH WORX.] WORX tools are engineered with cutting-edge technology, and above modern efficiency standards, so you can build a cost-effective tool collection that’s been designed to last. On-board storage for miter gauge, rip fence and blades.
  • [ACCESSORIES INCLUDED] 5 blades (woods, aluminum, scrolling, ceramic tile, steel) rip fence, miter gauge, dust extraction port, and blade grip. Sets up in seconds to cut wood, metal, tile, aluminum or plastic..
Check Stock