Top Indexable Boring Bar
Accusize Industrial Tools 3/4\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0034
Check StockAccusize Industrial Tools 8 Pc 3/4 Round Shank Indexable Boring Bar Set with Tcmt Carbide Inserts 90 Degree 2627-9108
- 3/4", .75in Round Shank, 90 Degree, Indexable Boring Bar Set, allowing the operator to set positive or negative rake.
- Chip breaker eliminates long stringer chips, A new cutting edge may be presented by simply, indexing the insert.
- It is not necessary to remove tool from chuck or tool post.
- Positive Rake 90Degree Lead, Uses 0.050" key, C6 grade: carbide for steel and alloy steel.
- 1/4" I.C. carbide inserts fit all bars, Radius = 0.015", Key = T8, Shank: 3/4", Piece per set: 8.
Check StockASZLBYM S06K/S07K/S08K/S10K/S12M-SCLCR06 Lathe Indexable Internal Boring Bar Set Lathe Turning Tools Holder Set with CCMT21.51/CCMT060204 Carbide Indexable Boring Turning Inserts + 5pcs T8 Wrench
- ♥PACKAGE INCLUDES : 5pcs lathe turning tools (S12M-SCLCR06 + S10K-SCLCR06 + S08K-SCLCR06 + S07K-SCLCR06 + S06K-SCLCR06 )+ 5PCS CCMT21.51( = ISO CCMT060204 ) carbide inserts + 5PCS T8 wrench , Comes with individual package, packed in Plastic box with Size mark on the box..
- ♥5PCS BORING BAR : The material of the boring bar is 40Cr steel, Widely Use, Tightly impacted bolt, simple structure, often used for small hole machining..
- ♥Lead cutting angle: 95 Degree, cutting direction: right hand, turning insert: CCMT21.51( = ISO CCMT060204 ), clear mark on the wrench, easy to identify bar holder..
- ♥ 5PCS CCMT21.51 INDEXABLE INSERTS : inserts are made of carbide and the coating material is Multilayer ,the Inserts can be used for finishing or semi-finishing stainless steel and cast iron..
- ♥ADVANTAGE : the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability .If you need more CCMT21.51/CCMT060204,you can search for ASIN: B09495PCR6.
Check StockAccusize Industrial Tools 3/8 1/2 5/8 & 3/4 inch 31 Pc Right Hand Stucr Indexable Boring Bar Set Including 20 Pc Tcmt Inserts P252-S412
- Small hole capacity: minimum of .430''. TCMT inserts.
- Negative 3 degree end cutting edge for 7 degree positive triangle Clearance.
- Bar is made of heat treated, precision ground alloy steel.
- 4pcs indexable boring bars(STUCR). 1pc each of 3/8", 1/2", 5/8" & 3/4".
- 10pcs TiN coated TCMT 21.5 inserts. 10pcs TiN coated TCMT 32.5 inserts. 4pcs torx screws. 2pcs torx wrench. 1pc fitted case.
Check StockASZLBYM 21PCS 1/2\/12mm Shank Indexable Carbide Lathe Turning Insert Tool Holder Bit Set for Turning Grooving Threading Boring with Indexable Carbide Turning Insert CCMT21.51 DCMT 16ER 11IR MGMN200-G
- ♥PACKAGE INCLUDES : 7 pieces 12mm / 1/2”shank indexable carbide lathe turning tool holders( SDNCN1212H07, SDJCR1212H07, SCLCR1212H06, SER1212H16, MGEHR1212-2, S12M-SCLCR06, SNR0012M11), 14 pieces indexable carbide inserts(CCMT21.51, DCMT21.51, 11IR A60, MGMN200-G, 16ER A60), 7 pieces wrenches..
- ♥Each tool holder comes with a C6 TiN Coated indexable carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
- ♥7 PIECES LATHE INSERT TOOL HOLDERS : the material of the holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size. Typically used for threading, turning, cutoff, boring, facing, external grooving, etc..
- ♥14 PIECES INDEXABLE CARBIDE INSERTS: the material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
Check StockSpec Ops Tools 11\ Molding Pry Bar Nail Puller Cats Paw, High-Carbon Steel, 3% Donated to Veterans,
- SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 21 inches to 33 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
- QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
- COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubles....
Check StockARES 46000-13.3-Inch to 18.5-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel
- SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 13.3 inches to 18.5 inches with a 14-position locking head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
- QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
- COMMON APPLICATIONS: Indexable Pry Bars are the perfect tools for removing engine and axle drive seals as well as a number of other applications. These 14-position pry bars give you superior leverage in confined or hard to reach areas, and extendable handle combined and ergonomic grip will give you the edge you need to get the job done..
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubleshooting help, parts, replacement, or refund..
Check StockARES 46003-21-Inch to 33-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel
- SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 21 inches to 33 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's knurled bands will help ensure a firm grip for the smoothest possible use..
- QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
- COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Extendable Indexing Pry Bar, simply contact customer service for troubles....
Check StockASZLBYM 3/4\ Right Cutting Lathe Indexable Turning Tool Holder MWLNR2020K08 with WNMG432 Carbide Turning Insert
- Top quality indexable lathe bits with replaceable tips. Inserts can be rotated to a new cutting edge without changing the position of the tool holder!.
- Set includes 5ps precision 1/4" shank tool bits with C6 carbide inserts, 5ps spare insert screws,2ps wrenches , 1ps wood case and 1ps blade..
- 2 Pcs. style "A" 0° for turning, facing, boring, and chamfering (AR & AL).
- 2 Pcs. style "B" 15° for turning, facing, boring, and for lead angles (BR & BL).
- 1 Pc style "E" 30° for turning, facing, boring, chamfering, threading, and V-grooving.
Check StockARES 46004-29-Inch to 48-Inch Extendable Indexing Pry Bar - 14-Position Adjustable Angle Head - High Strength Chrome Vanadium Steel
- SPECIFICATIONS: This Extendable Indexing Pry Bar features an adjustable length of 29 inches to 48 inches with a 14-position locking grooved head that is indexable to 180 degrees for improved access and leverage at nearly any angle. The handle's ergonomic TPR grip will help prevent hand fatigue and ensure a firm grip for the smoothest possible use..
- QUALITY: This indexable pry bar is constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. It also features a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
- COMMON APPLICATIONS: Our Indexable Pry Bars cover a wide variety of tasks from removing engine and axle drive seals to demolition, repositioning equipment, industrial work, aligning steel components, or moving engines. These compact 14-position pry bars give you superior leverage in confined or hard to reach areas, and the extendable handle and knurled grip will give you the edge you need to get the job done..
- RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed ....
Check StockAremnry 3PC Indexing Pry Bar Set - 15-Position Adjustable Angle Pry Bars - High Strength Chrome Vanadium Steel - 8in, 12in, 16in Indexable Pry Bars
- 【Specifications】 This adjustable pry bar set includes 8-inch, 12-inch and 16-inch pry bars. The bars feature adjustable 15-position locking heads and are indexable to 248 degrees to give you improved access to hard to reach places..
- 【Grip Comfortably】 Ergonomic thermoplastic rubber (TPR) handle on each auto pry bar allows for maximum grip and leverage with less user fatigue and more productivity..
- 【High Quality】 These indexable pry bars are constructed of high strength Chrome Vanadium Steel (CR-V) to ensure a lifetime of heavy duty use. They also have a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
- 【APPLICATIONS】 These indexable pry bars give you superior leverage in confined or hard to reach areas, and the long handles combined with the ergonomic grip will give you the edge you need to get the job done..
- 【Easy Storage】 Heavy-duty plastic blow-molded carrying case with latches and built-in handle for easy transportation, safe storage, and quick organization..
Check StockSandvik Coromant 880-D1200L20-03 Corodrill 880 Indexable Insert Drill, 880.L-03 (01) Tool Style Code, 0.787\ Shank, 20 mm Shank Diameter (Pack of 1)
- INDEXABLE DRILL: Versatile, carbide insert drilling tool and inserts for excellent tool life and holemaking performance.
- Patented STEP TECHNOLOGY to deliver excellent cutting force balance and indexable drilling productivity.
- INSERT SIZE & POCKET POSITIONING: Size 880-01 insert size, Central and Periphery drilling inserts.
- DRILL SHANK AND TYPE: Cylindrical with flat shank, coolant through the drill, metric design.
- With CoroDrill 880, you can do more than just drilling a hole. The tool can also be used for helical interpolation, boring, plunging, and turning..
Check Stock