Top Indexable Tool

Accusize Industrial Tools 1\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0001

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

[ELEPHAS] Woodworking Tool Spiral Cutter head and Helical cutterhead for Dewalt planer Original DW735-OEM

  • This cutterhead is the original size. You will need to remove inserts from the cutterhead before installing on the machine. The two bearings 6204+6202 are already installed on the cutterhead..
  • Reduced noise and tear-out, produce much smoother finish on difficult woods..
  • The patented indexable 4 cutting-edge double-layer insert and screw make it much easier to mount the knives on the cutterhead..
  • The indexable inserts allows you to rotate it if one knife edge is dull or nicked..
  • Including tool kit: 5 spare inserts/ 10 spare screws/ two T wrenches.
Check Stock

ASZLBYM 11pcs RPMT10T3 MOE R5 Indexable Carbide Milling Inserts Blade Milling Cutter with 5/8\/16mm SRDPN1616H10 Indexable Carbide Milling Tool Holder Metal Lathe Cutting Tools

  • PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8”/16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench..
  • Material : The SRDPN1616H10 5/8" lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel..
  • Milling tool holder cutter size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156" ≈ 3.97mm , diameter : 0.393≈ 10mm, P=11° degree..
  • Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock

ELEPHAS - 6 Woodworking Tool Spiral Cutter head and Helical cutterhead for jointer 4 rows 20 inserts

  • [Our Feature and Patent]: The indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.The....
  • [Durable Materials]: Our products are made of Tungstern Carbide and other materials which not only reduce noise and tear-out but also produce much....
  • If one knife edge is dull or nicked, simply rotate to another edge. You'll only need to replace one insert when all 4....
  • [Excellent quality]: We are dedicated to provide our customers with better experience and durable use on woodworking tools. With strict and high....
  • [Including tool kit & applicable jointer]: Two bearings: 6202+6203/ 5 spare inserts/ 10 spare screws/ two T wrenches.Detailed dimensions are attached....
Check Stock

8PCS Carbide Cutters Inserts Set for Wood Lathe Turning Tools - Include 12mm, 15mm and 8.9mm Round, 11mm, 14mm and 15mm Square, 30mm and 28mm Diamond with Sharp Point, Supplied with Screws

  • Replaceable Handle：Match 2pcs black aluminum alloy handle. Of course, you can also DIY the handle you like.
  • Material: aluminum alloy, STAINLESS STEEL, Tungsten Carbide.
  • Mid Size Tool Details: CNC machined from square STAINLESS STEEL, making them stronger, stiffer and less likely to roll than round shaft tools, Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life.
  • Easy to use: greatly simplified learning curving when turning, No complicated angles to learn and remember, For all skill levels woodworking enthusiast or DIY.
Check Stock

Mini Carbide Tipped Wood Lathe Turning tools Combo set Rougher Detailer Finisher with Wood Handle and Diamond Round Square Carbide Inserts，3pcs

  • Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Tip Insert , you can find it in our Amazon Store，(Square11 ×11× 2.0mm，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point and 10×32mm with Sharp Point).
  • Handle：wood material，Ergonomics design makes it more comfortable while doing turning job.
  • Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY，Every tool is beautifully coated for durability.
  • Package: Set of 3, Plastic case packaging.
Check Stock

3pcs Mini Carbide Tipped Wood Lathe Turning tools Combo set Rougher Detailer Finisher with Wood Handle and Diamond Round Square Carbide Inserts

  • Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Tip Insert , you can find it in our Amazon Store，(Square14×14 × 2.0mm，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point and 10×32mm with Sharp Point).
  • Handle：wood material，Ergonomics design makes it more comfortable while doing turning job.
  • Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY，Every tool is beautifully coated for durability.
  • Package: Set of 3, Plastic case packaging.
Check Stock

Indexable Lathe Turning Tool,16mm Shank 7 Pieces Carbide Turning Tool Set,Mental Lathe Tools Holder with Portable Case,for Turning Grooving Threading with Tin Coated Carbide Inserts.

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock

Accusize Industrial Tools 5/8\ 9 Pieces/Set, Indexable Carbide Turning Tools and Boring Bar, 2988-0058

  • Smooth finish on each turning tool holder marked with tool holder style and shank size..
  • Each tool holder comes with a C6 TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action..
  • Insert screw and wrench included, 9pcs indexable turning tool holder, 9pcs TiN Coated C6 carbide insert.
  • 9pcs hex screw, Hexagon key and Aluminum fitting case..
  • *** Insert kit Item#: 2988-0058INSERTS (Sold Separately on Amazon)***.
Check Stock

G0945 6" Benchtop Jointer

  • [Our Feature and Patent]: The indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.The improved design helps users to install the carbide inserts correctly onto the insert seats.It is safer for the user and the machine by preventing the cutter from breaking inside the thickness planer..
  • [Durable Materials]: Our products are made of Tungstern Carbide and other materials which not only reduce noise and tear-out but also produce much smoother finish on difficult woods..
  • If one knife edge is dull or nicked, simply rotate to another edge. You'll only need to replace one insert when all 4 sides are out of use..
  • [Excellent quality]: We are dedicated to provide our customers with better experience and durable use on woodworking tools. With strict and high quality control, you can choose our products with confidence..
  • [Including tool kit & applicable jointer]: Two bearings: 6202+6203/ 5 spare inserts/ 10 spare screws/ two T wrenches.Detailed dimensions are attached to the product photos. Fit fo....
Check Stock

ELEPHAS- 15' planer woodworking spiral cutterhead 15 inch 4 rows 52 inserts

  • "Our Feature and Patent： The indexable 4 cutting-edge double-layer insert on spiral cutter head have received the Patent of United States.The improved design helps users to install the carbide inserts correctly onto the insert seats.It is safer for the user and the machine by preventing the cutter from breaking inside the thickness planer.".
  • "Durable Materials： Our products are made of Tungsten Carbide and other materials which not only reduce noise and tear-out but also produce much smoother finish on difficult woods".
  • If one knife edge is dull or nicked, simply rotate to another edge. You'll only need to replace one insert when all 4 sides are out of use.".
  • "Excellent quality： We are dedicated to provide our customers with better experience and durable use on woodworking tools. With strict and high quality control, you can choose our products with confidence. ".
  • Including tool kit: two bearings: 6204+6205/ 10 spare inserts/ 10 spare screws/ two T wrenches.Detailed dimensions are attached to the product photos. If you have any questions, please provide the brand and model..
Check Stock

14 Pieces Lathe Boring Bar Set 4 Pieces 95 Degree S07K/ S08K/ S10K/ S12M-SCLCR06 Lathe Boring Internal Turning Bar Holder with 10 Pieces CCMT0602 Carbide Inserts and 4 Pieces Wrench

  • Package includes: you will receive 4 pieces SCLCR06 lathe boring bar turning tools holders, including a S07K-SCLCR06, a S08K-SCLCR06, a S10K-SCLCR06 and a S12M-SCLCR06, 10 pieces CCMT0602, metal indexable turning insert blades, sufficient quantity and easy to replace.
  • Quality material: lathe boring bar turning tools holder are made of quality cemented carbide and tungsten steel.
  • The cemented carbide material makes the turning tool durable and adaptable.
  • Indexable carbide turning insert blades are made of cemented carbide and use PVD coating, the blade is sturdy, low friction coefficient, wear-proof and stable.
  • Suitable size: the diameter of the S07K/ S08K/ S10K handle is 4.92 inches/ 125 mm, S12M-SCLCR06 is 5.9 inches/ 150 mm.
  • cutting angle is 95 degree, cutting direction is right hand.
  • Each tool holder has a black oxidized smooth surface, and the tool hardness (HRC up and down 48 degrees) and has nice accuracy.
  • Easy to store: insert 10 pieces of cemented carbide into a boxes, and put them in a plastic container, safe and easy to store, compatible with SCLCR06 lathe boring bar turning tools holders.
  • Tight impact bolts, simple structure, often applied for small hole processing.
  • Note: due to the slight color change of manu....
Check Stock