Top Indexable Turning Tools

OSCARBIDE Carbide Inserts APKT1604 TiAlN Coated Indexable Milling Inserts APKT Style,10 Piece/Box

  • APKT 1604 carbide turning inserts,85 degrees parallelogram,Relief Angle 11 degrees,nose radius 1/32"..
  • Made of Tungsten Carbide,TiAlN Coated ,the cutting speed are 4-7 time faster than generic steel,and Sharpened on a diamond wheel to make it longer tool life, providing you a better experience and durable use and Better cut.
  • Designed for cast iron and non-ferrous materials,good for both finishing and roughing.
  • Used for indexable face mill and end mill,Performing square milling and side milling,ramping milling, helical milling, slotting milling, plunging milling..
  • These Insert fit for our Carbide Indexable End Mills and other same size indexable end mills, please search B07SG8JKDS or B099WPXW29 to buy this indexable end mills.
Check Stock

GBJ MWLNR 1616H08 5/8\ Lathe Turning Holder + 10PCS WNMG431 Carbide Turning inserts, SER1212H16 SER 1/2\ External Threading Holder +10pcs 16ER 3/8\ AG60 Threading inserts

  • MTJNR 12-3C Right Hand Turning Tool Holder,3/4”Shank ,5” Length ,negative 3 degree lead angle..
  • Turning holder is made of HSS,carbide insert is made of solid carbide with tin coated, offer long tool life and faster cutting speed, low friction coefficient, good wear resistance.
  • Indexable Turning Holders use with TNMG, TNMA, or TNMM-32 style negative inserts.
  • MTJNR 12-3C Lathe Tool Holder,93 degree,clanping& Tool style for turning.
  • MTJNR 12-3C indexable tool holder for external contouring, profiling and facing from light roughing to finishing.
Check Stock

3PCS 5/8\ CNC Lathe Excircle Indexable Carbide Turning Tool Holder Bit Set MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 with 3pcs wnmg431, cnmg431, tnmg331 Indexable Carbide Inserts (Right Cutting)

  • ★Package Included：3pcs indexable carbide turning tool holder (MTJNR1616H16 + MWLNR1616H08 + MCLNR1616H12 ).
  • 3pcs indexable carbide turning inserts (CNMG431 + WNMG431 + TNMG331).
  • ★Shank Diameter （length×width）: (16*16mm ≈ 5/8"x5/8" ).
  • Overall Length：(100mm ≈ 3-7/8" ) ,Cutting Direction：right hand..
  • ★The material of the turning tool holder is 40Cr steel, black oxide smooth finish on each turning tool holder marked with tool holder style and shank size..
  • ★The material of the insert is carbide,the inserts can be used for finishing or semi-finishing steel, the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability..
  • ★If you need more matching insert or 5/8" left turning holder set, you can search for B07G386Y3B , B07Q1117MJ (inserts) or B07B8XNH98 , B07TTL32HW (holder).
Check Stock

DEEFIINE Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing and Finishing Hollow Tool Interchangeable Aluminum Alloy Handle with Diamond Round Square Carbide Blade (Metal handle)

  • ...: The high-quality CNC machining made of square stainless steel makes it stronger, harder and rolls less than round shaft tools. It has a square shaft so that the knife can be used with a flat back. Keep the shelf flat and flush with the floor。.
  • Rotary cutter design: the indexable carbide tool blade can be rotated or replaced to provide new cutting edge when needed..
  • Ergonomic design: the turning tool is equipped with 1pcs frosted handle that fits comfortably in the hand. In addition, it is equipped with an extension handle that can be used in deeper scenes, aluminium oxide alloy handles for grip, comfort and durability. making it a safe choice..
  • woodturningTools and Accessories - 1pcs handle and 1pcs extension bar ,3PCS tool bars with carbide cutters(Round,Square,Diamond),1PCS swan neck carbide cutter hollowing tools, 1pcs T15 wrench, 1pcs allen wrench, 1PC aluminum storage case..
Check Stock

Savannah 3 Piece Carbide Mini Turning Tool Set with Flush Fit Comfort Grip Hardwood Handles | Steel Riveted Ferrules and 2 ea Round 2 ea 4 inch Radius Square and 2 ea Diamond Shaped Carbide Cutters

  • High-performance woodworking lathe tools: high-strength tungsten carbide steel cutter, stainless steel rod and aluminum alloy handle, excellent ergonomic design and reliable grip, each tool is exquisitely coated, beautiful and durable. Compared with wood turning tools with wooden handles on the market, it is more able to withstand vibration..
  • Rotatable blade design: The indexable hard alloy blade provides you with a new blade to maximize the cutting life of the blade..
  • Easy-to-use woodworking tool set: Using this tool, there is no need to learn and memorize complicated angles, suitable for woodworking or DIY enthusiasts of all skill levels. Whether you are a beginner or an experienced turner, our carbide turning tools can bring you outstanding results..
  • Stability in use: The four steel cutter bars are made of square high-carbon steel CNC. They are hard and not easy to roll, which improves the stability of the tool during use. It reduces the using difficulty for beginners and is suitable for woodworking enthusiasts of all skill levels..
  • Our turning kit includes: Roughing tool, Finishing tool, Detailer tool, Gooseneck Hollower tool, 11-inch handles, 10-inch handle extensions, 2 T15 wrenches, all in one In aluminum alloy display box..
Check Stock

Mini Carbide Tipped Wood Lathe Turning tools Combo set Rougher Detailer Finisher with Wood Handle and Diamond Round Square Carbide Inserts，3pcs

  • Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Tip Insert , you can find it in our Amazon Store，(Square11 ×11× 2.0mm，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point and 10×32mm with Sharp Point).
  • Handle：wood material，Ergonomics design makes it more comfortable while doing turning job.
  • Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY，Every tool is beautifully coated for durability.
  • Package: Set of 3, Plastic case packaging.
Check Stock

3pcs Mini Carbide Tipped Wood Lathe Turning tools Combo set Rougher Detailer Finisher with Wood Handle and Diamond Round Square Carbide Inserts

  • Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life. If you need Carbide Replacement Tip Insert , you can find it in our Amazon Store，(Square14×14 × 2.0mm，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point and 10×32mm with Sharp Point).
  • Handle：wood material，Ergonomics design makes it more comfortable while doing turning job.
  • Easy to use: greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY，Every tool is beautifully coated for durability.
  • Package: Set of 3, Plastic case packaging.
Check Stock

OSCARBIDE 1/2\ Shank Nickel Plated Indexable Lathe Turning Tool Holder 7 Pieces/Set,CNC Heavy-Duty Metal Lathe Cutting Tools for Turning Grooving Threading Parting Cut Off Holders Set

  • ... metal lathe cutting tools. The set is used for semi-finishing/roughing steel , metal , great for turning, grooving or threading..
  • ❤Each tool holder comes with a TiN Coated carbide insert with positive rake cutting angle and built-in chip breaker great for general purpose cutting action. And swap out or rotate the indexable carbide tips to maintain a sharp and precise cut..
  • ❤Metal lathe accessories designed for easy material removal, perfect for aluminum, brass, bronze, cast iron, steel, stainless steel, plastic, titanium and more.The entire set is contained in a premuim aluminium storage case that protects and organizes each tool and stacks and stores easily..
  • ❤TJATSE is a leading manufacturer of production cutting tools for industry. Our goal is to provide to our customers cutting tools that are On Spec and On Time and that are made to your exacting specifications. We will provide you 100% satisfaction guarantee..
Check Stock

8PCS Carbide Cutters Inserts Set for Wood Lathe Turning Tools - Include 12mm, 15mm and 8.9mm Round, 11mm, 14mm and 15mm Square, 30mm and 28mm Diamond with Sharp Point, Supplied with Screws

  • Replaceable Handle：Match 2pcs black aluminum alloy handle. Of course, you can also DIY the handle you like.
  • Material: aluminum alloy, STAINLESS STEEL, Tungsten Carbide.
  • Mid Size Tool Details: CNC machined from square STAINLESS STEEL, making them stronger, stiffer and less likely to roll than round shaft tools, Features a square shaft so the flat back can be kept flat on the tool rest and level with the floor.
  • Indexable Replacement carbide insert design: matched with Carbide Insert, Indexable give you fresh edge for maximum cutter life.
  • Easy to use: greatly simplified learning curving when turning, No complicated angles to learn and remember, For all skill levels woodworking enthusiast or DIY.
Check Stock

OSCARBIDE Carbide Inserts TPG322 Turning Inserts TPGN160308,Tin Coated for Lathes and Mills,10 Pieces/Box.

  • Indexable Carbide Milling Insert 1/8" Thick, 1/32" Radius,11 degree relief angle..
  • Carbide Cutters material: made of solid carbide with mutilayer coated, offer long life and faster cutting speed, low friction coefficient, good wear resistance.
  • Carbide Bits for turning and milling carbon and alloy steels, tools steel and stainless steel.
  • Screw on triangle style insert with a chip breake.
  • 10 pieces per box, provides longer tool life than uncoated grades.
Check Stock

ARES 70184-3-Piece Indexable Pry Bar Set - 11-Position Adjustable Angle Pry Bars - High Strength Chrome Vanadium Steel - Includes 8-Inch, 12-Inch and 16-Inch Indexable Pry Bars

  • SPECIFICATIONS: This set includes 8-inch, 12-inch and 16-inch pry bars and a high quality storage case. The bars feature adjustable 11-position locking heads and are indexable to 180 degrees to give you improved access to hard to reach places. The handle features an ergonomic TPR grip that helps to prevent hand fatigue during prolonged use and provides a superior gripping surface for improved leverage..
  • QUALITY: These indexable pry bars are constructed of high strength Chrome Vanadium Steel to ensure a lifetime of heavy duty use. They also have a Manganese Phosphate finish to help to prevent rust and corrosion. Our indexable pry bars meet or exceed ANSI specifications for pry bars..
  • WHY YOU NEED THEM: Indexable Pry Bars are the perfect tools for removing engine and axle drive seals as well as a number of other applications. These 11-position indexable pry bars give you superior leverage in confined or hard to reach areas, and the long handles combined with the ergonomic grip will give you the edge you need to get the job done!.
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Indexable Pry Bar Set, simply contact customer s....
Check Stock

Wood Turning tool Carbide Tipped Working Lathe Tools Combo Set Include Finisher Rougher Detailer For Pen Bowl Making,Set Of 3

  • Combo Set Include: 3 Pieces Wood Turning Tools(Mid Finisher/Rougher/Detailer),Carbide Insert Cutters And Allen Key.
  • Dimension：Length of Tool Bar 5.91″(150mm) ，Length of wood handle：9.84″（250mm ），Overall length 15.75″(400mm).
  • Indexable Replacement carbide insert design:matched with Carbide Cutter (Square15×15 × 2.5mm-R50-30°，Round 12 × 2.5mm-30°，Diamond 10×28mm with Radius Point).
  • Designed to be kept flat on the tool rest and level to the floor, the YUFUTOL Finisher/Rougher/Detailer will effortlessly hog away massive amounts of material for any woodturning process without the need for sharpening，for wood hobbyist or DIY or carpenter.
  • Easy to use:greatly simplified learning curving when turning,No complicated angles to learn and remember,For all skill levels woodworking enthusiast or DIY.
Check Stock