Top Inductive Coupler

Telemecanique SG08003 Sensor Magnetic Switch

  • Inductive Proximity Sensors detect metal targets only (in close proximity to the sensor).
Check Stock

Rectorseal 83809 Aspen Mini Aqua 100 to 230V Air Conditioner Condensate Pump

  • Integral hanging loop and separate reservoir facilitates attachment in vertical applications.
  • 3A no/NC dry contacts rated at 5A inductive at 230V ac at 5A inductive at 230V ac.
Check Stock

Pure Heat - Ultimate MLB Flamethrowers

  • Legal in all 50 states and Canada (CARB EO #D-57-21).
  • 15 or 30 Ohm primary resistance values available.
Check Stock

Taiss 2PCS M12 4mm Sensing DC 5V NPN NO（Normally Open） 3D Printer LJ12A3-4-Z/BX-5V Cylinder inductive Proximity Sensor Switch Work Voltage 5VDC Special for MCU

  • Product Name : Inductive Proximity Switch.
  • Wire Type : 3 Wire Type (Black, Brown, Blue).
  • Operating Temperature : -25°C to +55°C (Non-freezing Condition).
  • Size : 6.2 x 2cm/2.4'' x 0.8'' (L*Max. Dia).
  • Package Content : 2 x Inductive Proximity Switch.
Check Stock

bROK Products 32973 Coupler 2\ Ball, 3\ Channel - 3500 lb.

  • PRECISE FIT. This trailer coupler is designed to mount onto a 3-inch wide trailer tongue beam and couple to any standard 2-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 2 trailer coupler and has a capacity of 3,500 lbs. gross trailer weight and 500 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

Taiss 1Pcs LJ18A3-8-Z/BX-5V M18 8mm Sensing DC 5V NPN NO（Normally Open） 3D Printer Cylinder inductive Proximity Sensor Switch Work Voltage 5VDC Special

  • Product Name : Inductive Proximity Switch.
  • Wire Type : DC 3 Wire Type Brown, black, Blue).
  • Operating Temperature : -25C to +55C (Non-freezing Condition).
  • Size : 7 x 3cm/2.8'' x 1.2'' (L*Max. Dia).
  • Package Content : 1 x Inductive Proximity Switch Special note: if the product you received is damaged or does not work properly, please contact us by email in time, and we will replace the new product for you free of charge.
Check Stock

CURT 25217 Black A-Frame Trailer Coupler, 2-Inch Hitch Ball, 7,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto an A-frame trailer tongue and couple to any standard 2-5/16-inch diameter trailer ball.
  • EASY OPERATION. Equipped with an easy-lock latch mechanism, this trailer hitch coupler is quick and simple to operate and offers a snug fit on the trailer ball.
  • SECURE COUPLING. The easy-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 4 trailer coupler and has a capacity of 10,000 lbs. gross trailer weight and 1,500 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this A-frame tongue trailer coupler is finished in a durable black powder coat and makes a great boat trailer coupler.
Check Stock

CURT 25100 Straight Tongue Trailer Coupler for 3-Inch Channel, 2-In Hitch Ball, 5,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto a 3-inch wide trailer tongue beam and couple to any standard 2-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 3 trailer coupler and has a capacity of 5,000 lbs. gross trailer weight and 700 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

EZ Snap Covers 9 Foot Long Standard Height 7 1/2″ Baseboard Heater Cover Kit with 2 Closed End Caps

  • EZ Snap Covers are 20 gauge galvanized steel with white epoxy powder coating. They are guaranteed never to rust and are 18% thicker steel than all comparable baseboard heater covers. End caps are 18 gauge thickness..
  • Our covers fit 95% of all existing hot water baseboard radiator heaters. Installation takes five minutes, requires no power tools, and saves you on pricey contractor bills..
  • Lengths over 8’ include a coupler to join the panels together. 8’ will be 2 4’ covers and a coupler, 9’ is 1 4’ and 1 5’ cover and a coupler.
  • 10’ is 2 5’ covers and a coupler, 11’ is 1 5’ and 1 6’ and a coupler.
  • 13’ is 1 6’ and 1 7’ and a coupler.
  • EZ Snap Covers have a lifetime warranty against rust. If they rust, send them back and we will replace them..
Check Stock

CURT 25128 Straight Tongue Trailer Coupler for 2-Inch Channel 1-7/8-In Hitch Ball 2,000 lbs

  • PRECISE FIT. This trailer coupler is designed to mount onto a 2-inch wide trailer tongue beam and couple to any standard 1-7/8-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 1 trailer coupler and has a capacity of 2,000 lbs. gross trailer weight and 200 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

2\ Straight Trailer Coupler, 2\ Channel - 3500 lb Class II - for Towing RV, Boat, Camper(3500LBS 2\X2\)

  • PRECISE FIT. This trailer coupler is designed to mount onto a 2-inch wide trailer tongue beam and couple to any standard 2-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 2 trailer coupler and has a capacity of 3,500 lbs. gross trailer weight and 500 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock

CURT 25153 Straight Tongue Trailer Coupler for 2-Inch Channel 2-in Hitch Ball 3,500 lbs CLEAR ZINC

  • PRECISE FIT. This trailer coupler is designed to mount onto a 2-inch wide trailer tongue beam and couple to any standard 2-inch diameter trailer ball.
  • EASILY ADJUSTABLE. Equipped with a posi-lock spring and adjustable nut on the inside, this trailer hitch coupler can easily be adjusted to ensure a snug fit on the trailer ball.
  • SECURE COUPLING. The posi-lock latch mechanism of this trailer tongue coupler accepts a safety pin or coupler lock for enhanced security.
  • HIGH-STRENGTH. Constructed from punched, die-cut steel, this trailer ball coupler is rated as a class 2 trailer coupler and has a capacity of 3,500 lbs. gross trailer weight and 500 lbs. tongue weight.
  • CORROSION-RESISTANT. To easily outlast the elements, including rain, snow, dirt, road grime and more, this straight tongue trailer coupler is finished in a durable zinc plating and makes a great boat trailer coupler.
Check Stock