Top Industrial Compressed Air Dryer System

1/2 NPT HEAVY DUTY Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter AUTO DRAIN

  • PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES. 1/2" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (AUTO DRAIN) STAGE 1.
  • 175 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer.
  • STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 175 PSI. 5oz Metal Bowl With Visible Sight Glass..
  • STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Metal Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change..
  • STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccan....
Check Stock

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Compressors with Pre-Filter

  • NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS. IF YOU NEED PRE-FILTER WITH REGULATOR, PLEASE SELECt " REGULATOR PRE-FILTER" OPTION ABOVE.
  • STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.
Check Stock

3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR PLASMA CUTTER 3/4 AUTO DRAIN

  • 3 STAGE, INDUSTRIAL GRADE COALESCING FILTER PLUS DESICCANT AIR DRYER, IN-LINE TYPE FOR COMPRESSED AIR LINES, PERFECT FOR SPRAY OR PLASMA CUTTER APPLICATIONS..
  • 2 BAGS OF DESICCANT BEADS INCLUDED, BEADS GO FROM BLUE TO PINK WHEN TIME TO CHANGE.
  • STAGE 1: PARTICULATE FILTER / WATER TRAP REMOVES 95% OF MOISTURE AND DEBRIS FROM COMPRESSED AIR LINES. 5u MICRON ELEMENT.
  • STAGE 2: COALESCING FILTER / OIL REMOVING FILTER REMOVES 99.98% OF MOISTURE, OIL AND CONTAMINANTS FROM YOUR COMPRESSED AIR LINES.
  • STAGE 3: DESICCANT DRYER TAKES UP TO 5oz OF DESICCANT BEADS TO THOROUGHLY DRY OUR YOUR COMPRESSED AIR LINES BEFORE THE AIR GETS TO YOUR PNEUMATIC TOOLS.
Check Stock

3 STAGE INDUSTRIAL GRADE IN-LINE COALESCING FILTER & DESICCANT AIR DRYER COMBINATION WITH METAL BOWLS FOR SPRAY GUN EQUIPMENT PAINT BOOTH COMPRESSOR PLASMA CUTTER 1/2 AUTO DRAIN

  • 3 STAGE, INDUSTRIAL GRADE COALESCING FILTER PLUS DESICCANT AIR DRYER, IN-LINE TYPE FOR COMPRESSED AIR LINES, PERFECT FOR SPRAY OR PLASMA CUTTER APPLICATIONS..
  • 2 BAGS OF DESICCANT BEADS INCLUDED, BEADS GO FROM BLUE TO PINK WHEN TIME TO CHANGE.
  • STAGE 1: PARTICULATE FILTER / WATER TRAP REMOVES 95% OF MOISTURE AND DEBRIS FROM COMPRESSED AIR LINES. 5u MICRON ELEMENT.
  • STAGE 2: COALESCING FILTER / OIL REMOVING FILTER REMOVES 99.98% OF MOISTURE, OIL AND CONTAMINANTS FROM YOUR COMPRESSED AIR LINES.
  • STAGE 3: DESICCANT DRYER TAKES UP TO 5oz OF DESICCANT BEADS TO THOROUGHLY DRY OUR YOUR COMPRESSED AIR LINES BEFORE THE AIR GETS TO YOUR PNEUMATIC TOOLS.
Check Stock

Schulz Refrigerated Air Dryer for Air Compressor Compressed Air Systems 35 cfm Good for 7.5hp & 10hp Air Compressors with Regulator Pre-Filter

  • NEW 35 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR/PRESSURE REGULATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 35CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
  • STAGE 1: ADJUSTABLE 7 - 175 PSI PRESSURE REGULATOR + GAUGE / WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.
Check Stock

Industrial Service Solutions ALWITCO X07 Atomuffler Air Dryer Muffler | 3/4 inch NPT Male, Single Chamber, 175 PSI | Replacement Part | Dual-Stage Filter | for Compressed Air Equipment & Systems

  • DUAL-STAGE FILTER FOR LONGER ELEMENT LIFE - Built for compressed air dryers, it effectively traps dust and other particulates in the primary stage of the filter. Reduces noise in the second stage to maintain a safe and comfortable work environment..
  • COMPATIBLE WITH DIFFERENT EQUIPMENT - The X07 Air Dryer Muffler is compatible with various compressed air filters and systems. Designed to fit and match the specifications of your original equipment to ensure your compressor performs at its best..
  • HIGH-QUALITY MUFFLERS BUILT TO LAST - Exclusively manufactured by ALWITCO, our air dryer muffler lasts longer than generic parts. Recommended by leading noise consultants and safety engineers all around the world..
  • WIDE RANGE OF INDUSTRIAL APPLICATIONS - Our specialized solutions are engineered for various industries. Suitable for air-operated equipment used in General Manufacturing, Automotive, and other important sectors..
  • TRUST THE ORIGINAL - With more than 65 years of history in manufacturing industrial noise control devices, Allied Witan Company helps promote health and safety in the workplace with clean, quiet, and reliable products that you can rely on..
Check Stock

3 Stage Heavy Duty Industrial Grade Filter Regulator Coalescing Desiccant Dryer System For Compressed Air Lines Metal Bowls Great For Paint Spray And Plasma Cutter 3/4 Npt Manual Drain

  • 3/4" Npt, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And....
  • 225 Psi Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your....
  • Stage 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed....
  • Stage 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil....
  • Stage 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5Oz Desiccant Beads In The Bowl. Beads....
Check Stock

Schulz REFRIGERATED AIR Dryer for AIR Compressor, Compressed AIR Systems, 100 CFM, Good for 20HP & 25HP COMPRESSORS (with PRE-Filter)

  • NEW 100 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED ARROW PNEUMATICS WATER SEPARATOR.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 100 CFM @ 100 PSI / 1.25" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE PRE-FILTER.
  • STAGE 1: ( ARROW PNEUMATICS F329-10WF3 ) WATER SEPARATOR FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 3 MICRON ELEMENT, INTERNAL FLOAT DRAIN (AUTO DRAIN).
Check Stock

Schulz REFRIGERATED AIR Dryer for AIR Compressor, Compressed AIR Systems, 150 CFM, Good for 30HP & 40HP COMPRESSORS (with PRE-Filter)

  • NEW 150 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED ARROW PNEUMATICS WATER SEPARATOR.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 150 CFM @ 100 PSI / 1.5" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 175 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE PRE-FILTER.
  • STAGE 1: ( ARROW PNEUMATICS F329-12WF3 ) WATER SEPARATOR FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 3 MICRON ELEMENT, INTERNAL FLOAT DRAIN (AUTO DRAIN 5200), WALL BRACKET (DBK10) INCLUDED.
Check Stock

HEAVY DUTY INDUSTRIAL 3 STAGE COMPRESSED AIR CLEANER MOISTURE TRAP COALESCING FILTER DESICCANT DRYER 3/4 MANUAL DRAIN

  • 225PSI MAX, INDUSTRIAL 3 STAGE AIR CLEANER. 1" NPT INLET AND OUTLET, 11oz METAL BOWLS WITH SIGHT GLASS, WALL MOUNTING BRACKETS.
  • STAGE1: Particulate Filter / Water Trap will remove 95% of initial moisture and contaminents.
  • STAGE 2: Coalescing Filter removes 99.98% of remaining moisture vapor, oil and oil vapor from compressed air lines.
  • STAGE 3: Desiccant Air Dryer removes all remaining moisture and dries out the compressed air downstream to your pneumatic tools.
  • 225PSI Max Output, Replacement Filter Stage 1 ASIN, B01MUDUXU6 .. Replacement Filter Stage 2 ASIN, B01NCZ7452.
Check Stock

Plews & Edelmann 56-081 Desiccant Dryer , Black

  • Amflo compact desiccant dryers have been engineered to deliver extremely dry compressed air to protect pneumatically operated equipment from the adverse affects of moisture.
  • A regular filter and an oil removal filter should be used as a prefiltering system immediately ahead of the desiccant dryer - a regular filter may be required after the dryer to remove desiccant dust.
  • Features an aluminum main body, metal bowl with sight glass, 70 Micron porous polypropylene internal inlet filter, 40 Micron sintered bronze internal outlet filter, 300 psi Max pressure.
  • 1/2 inch port size, 1 qt capacity Steel bowl is rated at 250 psi at 120 degrees F.
  • for compressed air systems only - not for use with fluids.
  • When desiccant bead has changed Color from dark Blue to Pink the entire desiccant must be replaced or regenerated by placing it in a drying oven at 275 degree F until it turns dark Blue again.
Check Stock

Medify MA-112 Air Purifier with H13 True HEPA Filter | 2,500 sq ft Coverage | for Smoke Smokers Dust Odors Pet Dander | Quiet 99.9% Removal to 0.1 Microns | Black 1-Pack

  • 225PSI MAX, INDUSTRIAL 3 STAGE AIR CLEANER. 1" NPT INLET AND OUTLET, 11oz METAL BOWLS WITH SIGHT GLASS, WALL MOUNTING BRACKETS.
  • STAGE1: Particulate Filter / Water Trap will remove 95% of initial moisture and contaminents.
  • STAGE 2: Coalescing Filter removes 99.98% of remaining moisture vapor, oil and oil vapor from compressed air lines.
  • STAGE 3: Desiccant Air Dryer removes all remaining moisture and dries out the compressed air downstream to your pneumatic tools.
  • 225PSI Max Output, Replacement Filter Stage 1 ASIN, B01MUDUXU6 .. Replacement Filter Stage 2 ASIN, B01NCZ7452.
Check Stock