Top Industrial Control Automation

Deegoo-FPV NEW 12pcs NRF24L01+ 2.4GHz Arduino Wireless RF Transceiver Module

  • Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications..
  • 125 Communications channels, Multi-point communication and frequency hopping to meet the communication needs..
  • Built-in hardware CRC error detection, Multipoint communication address control. Built-in 2.4Ghz antenna..
  • nRF24L01 is a single chip radio transceiver for the worldwide 2.4 - 2.5 GHz ISM band. Compatible with Arduino and Raspberry Pi..
  • Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation..
Check Stock

RF Mini Wireless Remote Controller for Single Color 3528 5050 LED Strip Lights, Wireless Remote Control with DC Connector, RF Dimmer for 12V DC LED Ribbon, Shelf Lights

  • ...versing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights..
  • 4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input voltage is 12V, and each receiver’s relay capacity is up to [email protected] and [email protected]..
  • 5. Wide Applications – The wireless remote control switch can be widely used in short and long range turn devices on / off wirelessly, anti-theft alarm control panels, lifts, boats, motor-driven curtain, roller blinds, garage door openers, gate barriers, motorcycles, vehicles, cars, trucks, RVs, electric generator, electric door release locks, windows, manual switches extender, LED lighting lamp bulbs and strips, entrance and access control etc..
Check Stock

GCAN-205 Modbus TCP to CAN Converter, Allows User to Connect Some ModTCP Master with an existing CAN Network

  • The GCAN-204 is a CAN to Modbus RTU Slave Converter with one Serial interface and one CAN interface. It allows user to connect some Modbus Master (for example: PLC, HMI, etc) with an existing CAN network. It has integrated isolation protection module and easier to install with DIN-rail..
  • CAN industrial automation control system.
  • The serial communication device is connected to CAN-bus.
Check Stock

Logitech Harmony Ultimate Home [Discontinued by Manufacturer]

  • Powerful home entertainment and automation control: One remote easily controls entertainment devices plus connected lights, locks, thermostats, blinds, sensors, and more.
  • Intuitive color touch screen: Simply swipe and tap to control channels, movies, 50 customizable channel Favorites and home automation devices such as Philips hue lights or Nest Learning Thermostat.
  • Harmony app: Turns iOS or Android smartphones or tablets into a second, personal universal remote control.
  • Closed cabinet control: Included Harmony Home Hub lets you control devices in closed cabinets.
  • Simple setup on computer or mobile app for control of 15 home entertainment devices and unlimited home automation devices: Works with over 270,000 devices, including your TV, satellite or cable box, Blu-ray player, Apple TV, Roku, Sonos, game consoles, Philips hue lights and more..
Check Stock

12V Relay Remote Switch Wireless RF Remote Control Switch 4 Channel Relay Module 433Mhz Transmitter Receiver Kit Universal Remote Controller for Lights Ceiling Fan Garage Door Opener Gate Car & More

  • ...versing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights..
  • 4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input voltage is 12V, and each receiver’s relay capacity is up to [email protected] and [email protected].
  • 5. Wide Applications – The wireless remote control switch can be widely used in short and long range turn devices on / off wirelessly, anti-theft alarm control panels, lifts, boats, motor-driven curtain, roller blinds, garage door openers, gate barriers, motorcycles, vehicles, cars, trucks, RVs, electric generator, electric door release locks, windows, manual switches extender, LED lighting lamp bulbs and strips, entrance and access control etc..
Check Stock

ASI ASI328002 24Vdc Pluggable SPDT Relay with DIN Rail Mount Screw Clamp Terminal Block Base, 6 amp, 250 VAC Rating, 24 VDC Coil

  • ...TY: Super wear-resistant, anti-oxidation and corrosion resistance, reliable operation and low power consumption Fast switching speed, no spark, no noise, no electromagnetic interference, long service life, no electric shock, strong anti-interference, strong compatibility..
  • A WIDE RANGE OF APPLICATION: Widely used in Industrial automation, electric furnace heating, stage lighting control, photocopiers, medical equipment, petrochemical equipment, food machinery, packaging machinery, textile machinery, CNC machine tools, plastic machinery, fitness equipment, entertainment facilities and other automation control areas.and so on. etc..
Check Stock

PLC Controller, DC24V Programmable Logic Controller 4 Channel 100K Pulse 32bit MCU Industrial Control Board with Housing for FX1N-32MT, 16 Point Input 16 Transistor Output

  • ✊【Easy to Use】Our products is a high-quality PLC Programmable Controller, and built to strict quality control standards, as a artistic appearance and simple structure, it all 10 ports use photoelectric isolation to transmit signals, which can effectively filter out various interferences, the input supports positive/negative triggers, very friendly to novices..
  • ✊【Good Performance】Our products has Using 32‑bit industrial processors, small PLCs suitable for industrial automation applications. Besides, it has high‑speed counter function, comes with analog input and output channels, supports 2 channels of 100K high‑speed pulse output..
  • ✊【Strong Applicability】ThisPLC Programmable Controller has Compatible with most commands of FX3U, support for GXworks2/GxDeveloper programming, with independent programming port, which can help you in many areas..
  • ✊【Wide Application】Our power circuit adopts anti‑reverse and anti‑surge design, which is widely used in the signal acquisition and control of industrial field equipment..
  • ✊【Use it with Confidence】You can use our product with confidence, this lathe keeps guaranteed quality after many inspections before leaving the factory..
Check Stock

Siemens SIMATIC HMI KTP400 Basic Panel, Key/Touch Operation, 4\ TFT Display, PROFINET Interface for Automation Systems, Distributed Control Systems, Industrial Communication

  • Features: The ideal entry-level range for simple HMI applications | Engineered in the TIA Portal | Flexible scalability within the HMI range | High-resolution, dimmable wide-screen displays with 64.000 colors.
  • Touch/key functionality for intuitive operation | Interface for connection with various PLCs | Versions for PROFIBUS or PROFINET | Archiving via USB stick.
  • Configuration software: WinCC Basic (TIA Portal) V13 or higher | Messages: 1000 | Message classes: 32 | Process screens: 100 | Vector graphics: yes | Bar graphics: yes.
  • Curve diagrams: f(t) | Recipes: 50 | Archiving: yes | Resolution: 480 x 272 px | Control elements: Touch screen / 4 Function keys | Memory: 10 MB | Interface: 1 x RJ 45 Ethernet for PROFINET / 1 x USB host | Degree of protection: IP 65, NEMA 4x (front if mounted) / IP 20 rear | Installation cutout: 123 x 99 mm | Device depth: 43 mm.
  • Supply Scope: 1 unit of Siemens KTP400 SIMATIC HMI Basic Touch Panel, Instruction Manual | Applications: Automation systems, Distributed Control Systems, Industrial Communication, Industrial controls, Identification and Locating, Process Analytics, Industry software.
Check Stock

DORHEA 10PCS NRF24L01+ 2.4GHz RF Radio/Wireless Transceiver Module Compatible with Raspberry Pi

  • NRF24L01 is a single chip radio transceiver for 2.4 - 2.5 GHz ISM band, low operating voltage : 1.9 ~ 3.6V low voltage operation..
  • Built-in hardware CRC error detection, Multipoint communication address control, built-in 2.4Ghz antenna, add wireless capability to your projects..
  • 125 Communications channels frequency points, multi-point communication and frequency hopping to meet the communication needs..
  • Applications: wireless peripherals, remote control systems such as RC vehicles and consumer remote electronics, wireless voice transmission such as VoIP, wireless sensor networks, wireless networks, home and commercial automation. Compatible with Arduino and Raspberry Pi..
  • Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications, for easy implementation into designs without additional hardware..
Check Stock

5pcs/lot 30CPQ150 Schottky Rectifier diode TO-247 150V

  • 【Type No.】: MBR40100PT Schottky diode, other models in the same series are MBR40150PT/MBR40200PT, etc..
  • 【Chip】: High-quality large chip, high-precision integrated test line to monitor electrical parameters.
  • 【Features】: Laser printing is not easy to fade, oxygen-free copper pins have good conductivity.
  • 【Package】: 5pcs packed by exquisite environmentally friendly boxes or bags, which can not only reduce damage during transportation, but also be recycled and reused.
  • 【Applications】: Switching power supply, LED lights, integrated circuit, mobile communications, computers, industrial automation control equipment, automotive electronics , LCD television, IoT , smart home , medical equipment , cooker and other small appliances..
Check Stock

uxcell 150Pcs SV5.5-5 Insulated Fork Spade U-Type Wire Connector Electrical Crimp Terminal 12-10AWG Yellow

  • 【FEATURE】- When the insulated terminals are closely spaced from each other, it can improve the safety of insulation, prevent the bifurcation of the wires, and make it easier to insert the wires into the plug..
  • 【ADVANTAGE 1】- The Copper Crimp Connector's shell is made of PVC, with insulation and flame retardant, high safety and good protection performance.
  • 【ADVANTAGE 2】- Electrical Crimp Connector's Pin made of metal, tight contact and good conductivity.
  • 【APPLICATION】-Insulated fork terminals widely applied in electric and electronic industry, electric equipment, Industrial automation, street lighting and power control system in traffic and transportation, posts and telecommunication, petrol chemical industry, industrial building machine-building, etc..
Check Stock

Power Supply Supplier Box, Power Supply Box Direct Control Access Controller Lock for Office for Home

  • Material: High‑quality aluminum alloy material is corrosion‑resistant, wear‑resistant and durable with good heat dissipation..
  • Cooling Hole Design: The heat dissipation hole design of perforated mesh is combined with aluminum alloy to resist high temperature..
  • Input Voltage: AC 100-264V. Output Voltage: DC 12V. Output Current: 1.25A. Error Range: ±1%. Adjustable Pressure Range: ±5%. Power: 15W Maximum. Waterof Rating: IP20. Product Size: Approx. 70x40x33mm / 2.8x1.6x1.3in..
  • Purpose: Industrial automation, PLC control cabinet, DC motor, medical equipment, access control display system, monitoring equipment, light box advertising, LED equipment.
  • Stable Output Performance: Optimized components to ensure stable performance and long service life. Adopting EMI filter circuit, switching power supply is anti‑interference and its output is more stable..
Check Stock